Pi-4-USB

ToqueCAN Pi 4 USB C PCB

This is a PCB for connecting a ToqueCAN to a Raspberry Pi 4 (only) without needing a USB cable. This connects to the USB C connector on the ToqueCAN and the Pi 4.

You need to be able to SSH into your Raspberry Pi 4 and edit some files to be able to use this. Instructions:

1. SSH into your Raspberry Pi.
2. Edit the config.txt file in /boot by using sudo nano /boot/config.txt. You may need to enter your password again for sudo.
3. Add dtoverlay=dwc2,dr_mode=host to the bottom of the file in a new line.
4. Press CTRL + X, then Y, then ENTER to save and exit.
5. Reboot your Raspberry Pi (reboot now)
6. Plug in the PCB. It's ready to use.

Purchase Links

United States

• Isik's Tech (Me)