DC Motor documentation

components/src/main/resources/application.yml

@@ -30,7 +30,7 @@ pi4j:
       shutdown: 0
     servo-motor:
       name: Servo Motor
-      address: 18
+      address: 17
       pwmType: SOFTWARE
       provider: pigpio-pwm
       initial: 0
@@ -199,4 +199,4 @@ pi4j:
       provider: pigpio-pwm
       initials: 0, 0, 0
       shutdowns: 0, 0, 0
-  # end::multiPWM[]
+  # end::multiPWM[]

pi4micronaut-utils/src/docs/asciidoc/components/outputComponents/motor.adoc

@@ -0,0 +1,106 @@
+:imagesdir: img/
+
+ifndef::rootpath[]
+:rootpath: ../../
+endif::rootpath[]
+
+ifdef::rootpath[]
+:imagesdir: {rootpath}{imagesdir}
+endif::rootpath[]
+
+==== Motor
+
+[.text-right]
+https://github.com/oss-slu/Pi4Micronaut/edit/develop/pi4micronaut-utils/src/docs/asciidoc/components/outputComponents/motor.adoc[Improve this doc]
+
+===== Overview
+
+This section provides details of the DC motor, including its components and assembly instructions.
+
+===== Components
+
+* 1 x RaspberryPi
+* 1 x Breadboard
+* 1 x T-Extension Board
+* 1 x DC Motor
+* 8 x Jumper wires
+* 1 x L293D Motor Controller IC 1
+* 1 x battery pack with 4 AA or AAA batteries
+* Power source (appropriate voltage, typically 3.3V)
+
+===== Assembly Instructions
+
+* Place the L293D Motor Controller on the breadboard.
+* Connect the motor to the breadboard, attaching both terminals in line with the L293D.
+* Connect the battery pack to the breadboard.
+* Connect a jumper wire from pin 17 to ...
+
+* *TODO*: finish documentation here
+
+===== Circuit Diagram
+
+image::motor_bb.png[]
+
+===== Schematic Diagram
+
+image::Motor_schem.png[]
+
+===== Functionality
+
+Motor can be enabled or disabled, change speed to custom value 0 to 100, and switch directions between clockwise and counterclockwise.
+
+===== Testing
+
+Use the below commands to test the component.
+This will cause the motor to turn.
+
+[source,bash]
+----
+$ curl http://localhost:8080/motor/enable
+----
+
+* `/enable` - Enables the motor.
+* `/disable` - Disables the motor.
+* `/setSpeed/{speed}` - Sets the speed of the motor to custom value 0 to 100.
+* `/setClockwise/{clockwise}` - Sets the direction of the motor; "true" for clockwise, "false" for counterclockwise.
+* `/switchDirection` - Switches the direction from clockwise to counterclockwise or vice versa.
+
+===== Troubleshooting
+
+* Motor does not turn on
+- Ensure all connections are secure and correct.
+- Check for appropriate voltage from power source.
+- Check the L239D for proper orientation and placement.
+- Ensure the software configuration matches the hardware setup.
+- Look for any error messages in the console or logs.
+
+* Motor turns on but does not respond to commands
+- Check the software configuration for any discrepancies.
+- Ensure the L239D is functioning properly.
+- Check for appropriate voltage from power source.
+
+===== YAML Configuration
+
+[source,yaml]
+----
+pwm:
+  motor:
+    name: Motor
+    address: 17
+    pwmType: SOFTWARE
+    provider: pigpio-pwm
+    initial: 0
+    shutdown: 0
+----
+
+===== Constructor and Methods
+
+To see the constructor and methods of our MotorHelper class see our javadoc link:https://oss-slu.github.io/Pi4Micronaut/javadoc/com/opensourcewithslu/outputdevices/MotorHelper.html[here]
+for more details.
+
+===== An Example Controller
+
+[source,java]
+----
+include::../../../../../../components/src/main/java/com/opensourcewithslu/components/controllers/MotorController.java[tag=ex]
+----