-
Notifications
You must be signed in to change notification settings - Fork 51
NI RFSG Peer To Peer Attributes
- NIRFSG_ATTR_P2P_DATA_TRANSFER_PERMISSION_INITIAL_CREDITS
- NIRFSG_ATTR_P2P_DATA_TRANSFER_PERMISSION_INTERVAL
- NIRFSG_ATTR_P2P_ENABLED
- NIRFSG_ATTR_P2P_ENDPOINT_COUNT
- NIRFSG_ATTR_P2P_ENDPOINT_SIZE
- NIRFSG_ATTR_P2P_GENERATION_FIFO_SAMPLE_QUANTUM
- NIRFSG_ATTR_P2P_IS_FINITE_GENERATION
- NIRFSG_ATTR_P2P_MOST_SPACE_AVAILABLE_IN_ENDPOINT
- NIRFSG_ATTR_P2P_NUMBER_OF_SAMPLES_TO_GENERATE
- NIRFSG_ATTR_P2P_SPACE_AVAILABLE_IN_ENDPOINT
| Numeric Value | Data Type | Access | Coercion | High-Level Functions |
|---|---|---|---|---|
| 1150135 | ViInt64 | R/W | Yes | None |
Specifies the initial amount of data that the writer peer can transfer over the bus into the configured endpoint when the peer-to-peer data stream is enabled. If this attribute is not set and the endpoint is empty, credits equal to the full endpoint size are issued to the writer peer. If data is written to the endpoint using the niRFSG_WriteP2PEndpointI16 function prior to enabling the stream, credits equal to the remaining space available in the endpoint are issued to the writer peer. This attribute is coerced up by NI-RFSG to 8-byte boundaries. This attribute is endpoint-based.
Units: samples per channel
Default Value: 1,024
Supported Devices: PXIe-5673E
Related Topics
Configuring a Peer-to-Peer Endpoint
Configuring Flow Control
| Numeric Value | Data Type | Access | Coercion | High-Level Functions |
|---|---|---|---|---|
| 1150134 | ViInt64 | R/W | Yes | None |
Specifies the interval at which the RF signal generator issues credits to allow the writer peer to transfer data over the bus into the configured endpoint. This attribute is coerced up by NI-RFSG to the nearest 128-byte boundary. This attribute is endpoint-based.
Units: samples per channel
Supported Devices: PXIe-5673E
Related Topics
Configuring a Peer-to-Peer Endpoint
Configuring Flow Control
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150123 | ViBoolean | R/W | Endpoint | None | None |
Specifies whether the RF signal generator reads data from the peer-to-peer endpoint. This attribute is endpoint-based.
Defined Values:
| VI_TRUE | Peer-to-peer data streaming is enabled. |
|---|---|
| VI_FALSE | Peer-to-peer data streaming is disabled. |
| Default Value: VI_FALSE |
Supported Devices: PXIe-5673E, PXIe-5820/5830/5831/5832/5840/5841
Related Topics
Configuring a Peer-to-Peer Endpoint
| Numeric Value | Data Type | Access | Coercion | High-Level Functions |
|---|---|---|---|---|
| 1150127 | ViInt32 | RO | None | None |
Returns the number of peer-to-peer FIFO endpoints supported by the device.
Supported Devices: PXIe-5673E, PXIe-5820/5830/5831/5832/5840/5841
Related Topics
Configuring a Peer-to-Peer Endpoint
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150124 | ViInt32 | RO | Endpoint | None | None |
Returns the size, in samples, of the device endpoint. This attribute is endpoint-based.
Units: samples (s)
Supported Devices: PXIe-5673E, PXIe-5820/5830/5831/5832/5840/5841
Related Topics
Configuring a Peer-to-Peer Endpoint
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150219 | ViInt64 | RO | Endpoint | None | None |
Returns how many samples NI-RFSG pulls from the peer-to-peer FIFO per read. You can use this attribute to determine how many samples to send across the peer-to-peer bus to ensure that no samples are ignored. If you send a number of samples that is not a multiple of this value, the remaining samples are not read from the FIFO during generation. This attribute is endpoint-based.
Supported Devices: PXIe-5820/5830/5831/5832/5840/5841
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150217 | ViBoolean | R/W | Endpoint | None | None |
Specifies whether peer-to-peer should continuously generate data from the peer-to-peer stream or from only a finite number of samples, according to the NIRFSG_ATTR_P2P_NUMBER_OF_SAMPLES_TO_GENERATE attribute. To use this attribute, peer-to-peer must be enabled. This attribute is endpoint-based.
Defined Values:
| VI_TRUE | Data is generated from only a finite number of samples. |
|---|---|
| VI_FALSE | Data is continuously generated from the peer-to-peer stream. |
| Default Value: VI_FALSE |
Supported Devices: PXIe-5820/5830/5831/5832/5840/5841
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150126 | ViInt32 | RO | Endpoint | None | None |
Returns the largest number of samples per channel available in the endpoint since this attribute was last read. You can use this attribute to determine how much endpoint space to use as a buffer against bus traffic latencies by reading the attribute and keeping track of the largest value returned. This attribute is endpoint-based.
If you want to minimize the latency for data to move through the endpoint and be generated by the RF signal generator, use the NIRFSG_ATTR_P2P_DATA_TRANSFER_PERMISSION_INITIAL_CREDITS attribute to grant fewer initial credits than the default of the entire endpoint size.
Units: samples per channel
Supported Devices: PXIe-5673E, PXIe-5820/5830/5831/5832/5840/5841
Related Topics
Configuring a Peer-to-Peer Endpoint
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150218 | ViInt64 | R/W | Endpoint | None | None |
Specifies how many samples are generated from the peer-to-peer subsystem when it is enabled. To use this attribute, peer-to-peer must be enabled and set to finite generation. This attribute is endpoint-based.
Supported Devices: PXIe-5820/5830/5831/5832/5840/5841
Related Topics
Configuring a Peer-to-Peer Endpoint
| Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|---|
| 1150125 | ViInt32 | RO | Endpoint | None | None |
Returns the current space available in the endpoint. You can use this attribute when priming the endpoint with initial data using the niRFSG_WriteP2PEndpointI16 function to determine how many samples you can write. You also can use this attribute to characterize the performance and measure the latency of the peer-to-peer stream as data moves across the bus. This attribute is endpoint-based.
Units: samples per channel
Supported Devices: PXIe-5673E, PXIe-5820/5830/5831/5832/5840/5841
Related Topics
Configuring a Peer-to-Peer Endpoint
Starting Peer-to-Peer Generation
Creating and Setting Up a gRPC Server
Session Utilities API Reference
gRPC API Differences From C API
Sharing Driver Sessions Between Clients
C API Docs
NI-DAQmx
- gRPC API Differences From C API
- Task Configuration And Control
- Channel Configuration And Creation
- Timing
- Triggering
- Read Functions
- Write Functions
- Export Hardware Signals
- Scale Configuration
- Internal Buffer Configuration
- Advanced Functions
- System Configuration
- Error Handling
- Buffer Attributes
- Calibration Info Attributes
- Channel Attributes
- Device Attributes
- Export Signal Attributes
- Persisted Channel Attributes
- Persisted Scale Attributes
- Persisted Task Attributes
- Physical Channel Attributes
- Read Attributes
- Scale Attributes
- System Attributes
- Task Attributes
- Timing Attributes
- Trigger Attributes
- Watchdog Attributes
- Write Attributes
NI-DCPOWER
- Setup Functions
- Configure Functions
- Measurement Functions
- Control Functions
- Trigger And Event
- Attribute Functions
- Query Functions
- Calibration Functions
- Utility Functions
- Supported Device
- Source Attributes
- Transient Attributes
- Voltage Attributes
- Current Attributes
- Pulse Voltage Attributes
- Pulse Current Attributes
- Cutoff Attributes
- Measurement Attributes
- Trigger Attributes Functions
- Event Attributes
- Advanced Attributes
- Inherent Ivi Attributes
- Supported Device Attributes
NI-DIGITAL PATTERN DRIVER
- Init And Close Functions
- Session Locking Functions
- Utility Functions
- Error Handling Functions
- Calibration Functions
- Attributes Functions
- Pin Map Functions
- Low Level Functions
- Low Level Action Functions
- Pin Control Functions
- Static IO Functions
- Clock Generator Functions
- Levels And Timing Functions
- TDR Functions
- PPMU Configuration Functions
- DC Voltage Functions
- DC Current Functions
- PPMU Action Functions
- Pattern Configuration Functions
- Pattern Action Functions
- History Ram Functions
- Source Memory Functions
- Capture Memory Functions
- Triggers And Events Functions
- Conditional Jump Trigger Functions
- Sequencer Flag Functions
- Sequencer Register Functions
- Match Fail Combination Functions
- Pattern Results Functions
- Sort Results Functions
- Frequency Measurement Functions
- IVI Inherent Attributes
- Specific Driver Information Attributes, Read Only
- Driver Setup Information Attributes
- Device Attributes
- Pin Control Attributes
- Level Configuration Attributes
- Trigger Configuration Attributes
- PPMU Attributes
- Patterns Attributes
- Pattern Opcode Event Attributes
- Timing Offset Attributes
- Keep Alive Attributes
- Frequency Measurement Attributes
- Clock Generator Attributes
- History RAM
- Synchronization Attributes
- TDR Endpoint Termination Attributes
NI-FGEN
- Setup Functions
- Configuration Functions
- Standard Output Functions
- Arbitrary Waveform Output Functions
- Arbitrary Sequence Output Functions
- Incremental Waveform Write Functions
- Configure Clock Functions
- Trigger And Syncronizations Functions
- 5404 Routing Functions
- Script Output Functions
- Configure Onboard Signal Processing Functions
- Configure Peer To Peer Functions
- Attribute Functions
- Waveform Control Functions
- Error Functions
- Output Attributes
- Arbitrary Waveform Attributes
- Data Transfer Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Attributes
- Standard Function Attributes
- Clock Attributes
- Event Attributes
- Triggering Attributes
- Instrument Specific Attributes
- Inherent IVI Attributes
- 5401 5411 5431
NI-RFmx Bluetooth
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Packet Attributes
- Auto Detect Signal Attributes
- Modacc Attributes
- ACP Attributes
- Twenty dB Attributes
- Frequency Range Attributes
- TXP Attributes
- Advanced Attributes
NI-RFmx NR
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attributes Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Signal Detection Attributes
- Component Carrier Attributes
- List Attributes
- Modacc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- TXP Attributes
- Pvt Attributes
- Advanced Attributes
NI-RFmx LTE
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Ch Configuration Functions
- NB IoT Configuration Functions
- ModAcc Configuration Functions
- ACP Configuration Functions
- CHP Configuration Functions
- OBW Configuration Functions
- SEM Configuration Functions
- PVT Configuration Functions
- SlotPhase Configuration Functions
- SlotPower Configuration Functions
- Set And Get Attribute Functions
- ModAcc Fetch Functions
- ACP Fetch Functions
- CHP Fetch Functions
- OBW Fetch Functions
- SEM Fetch Functions
- PVT Fetch Functions
- SlotPhase Fetch Functions
- SlotPower Fetch Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Component Carrier Attributes
- ModAcc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- PVT Attributes
- SlotPhase Attributes
- SlotPower Attributes
- Advanced Attributes
NI-RFmx SpecAn
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Read Functions
- Fetch Functions
- Utility Functions
- Marker Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- ACP Attributes
- Cdf Attributes
- CHP Attributes
- Fcnt Attributes
- Harm Attributes
- OBW Attributes
- SEM Attributes
- Spectrum Attributes
- Spur Attributes
- TXP Attributes
- AMPM Attributes
- Dpd Attributes
- IQ Attributes
- IM Attributes
- NF Attributes
- Phasenoise Attributes
- PAVT Attributes
- Advanced Attributes
NI-RFmx WLAN
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch DSSS ModAcc Functions
- Fetch OFDM ModAcc Functions
- Fetch SEM Functions
- Fetch TXP Functions
- Fetch PowerRamp Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- OFDM Attributes
- Auto Detect Signal Attributes
- DSSS ModAcc Attributes
- OFDM ModAcc Attributes
- SEM Attributes
- TXP Attributes
- PowerRamp Attributes
- Advanced Attributes
NI-RFSA
- General Functions
- Configuration Functions
- Acquisition Functions
- Utility Functions
- Calibration Functions
- General Attributes
- Vertical Attributes
- Signal Path Attributes
- Acquisition Attributes
- Acquisition Attributes
- Triggers Attributes
- Events Attributes
- Device Characteristics Attributes
- Peer To Peer Streaming Attributes
- Configuration List Attributes
- Inherent IVI Properties Attributes
- De-embedding Attributes
- Self Calibration Attributes
- Factory Calibration Attributes
- External Alignment Attributes
- Device Specific Attributes
NI-RFSG
- General Functions
- Generation Configuration
- Utility Functions
- Calibration Functions
- Arb Attributes
- Clock Attributes
- Configuration List Attributes
- De-embedding Attributes
- Device Characteristics Attributes
- Device Specific Attributes
- Events Attributes
- External Calibration Attributes
- Inherent IVI Attributes Attributes
- IQ Impairment Attributes
- Load Configurations Attributes
- Modulation Attributes
- Obsolete Attributes
- Peer To Peer Attributes
- RF Attributes
- Self Calibration Attributes
- Triggers Attributes
NI-SCOPE
- Setup Functions
- Configure Functions
- Attribute Functions
- Acquisition Functions
- Measurement Functions
- Calibrate Functions
- Utility Funcitons
- Error Handling Functions
- IVI Compliance Or Obsolete Functions
- Vertical Attributes
- Horizontal Attributes
- Trigger Attributes
- Clocking Attributes
- Synchronization Attributes
- Acquisition Attributes
- Waveform Measurements Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Streaming Attributes
- Device Attributes
- IVI Or Obsolete Attributes
- Instrument Capabilities Attributes
- If Digitizer Attributes
NI-XNET
- gRPC API differences from C APIs
- General Functions
- Cluster Properties
- Database Properties
- Device Properties
- ECU Properties
- Frame Properties
- Interface Properties
- LIN Schedule Entry Properties
- LIN Schedule Properties
- PDU Properties
- Session Ethernet Properties
- Session Frame Properties
- Session Interface Properties
- Session Properties
- Session SAE J1939 Properties
- Signal Properties
- Subframe Properties
- System Properties
- IP-Stack Functions
- Socket Options
- Socket Functions