This is a work in progress VHDL frontend for the Yosys toolchain.
The last few weeks, I finished up the first experimental netlist synthesis algorithm for the use in my thesis. The latter, sadly, is due in about 14 days, hence I won't be able to develop Yodl for at least 2 weeks.
Here are some teasers what's currently possible. Note, that some example serve as illustration of how the synthesis algorithm produces netlists and aren't necessarily sound or even semantically correct (since there are no semantic checks yet :))
- Simple signal assignment synchronization
architecture behv of adder is
function rising_edge(c : in std_logic) return std_logic;
begin
process(A) is
begin
if rising_edge(clock) then
A <= '0';
end if;
end process;
end behv;
- Nested synchonization
-- [...]
-- A and clock are both of type std_logic
architecture behv of adder is
function rising_edge(c : in std_logic) return std_logic;
begin
process(A) is
begin
if rising_edge(clock) then
if rising_edge(clock) then
A <= '0';
end if;
end if;
end process;
end behv;
- Simple latched signal assignment
-- same libraries as above
-- A, B and C are of type std_logic
architecture behv of adder is
function rising_edge(c : in std_logic) return boolean;
begin
process(A) is
begin
if A = B then
C <= '1';
end if;
end process;
end behv;
- Nested latched signal assignment
-- [...]
-- same preamble as above
process(A) is
begin
if A = B then
if not A then
C <= '1';
end if;
end if;
end process;
end behv;
- Simple case synthesis
-- same libraries as before
-- A is a std_logic and baz a std_logic_vector(2 downto 0)
architecture behv of caseT is
begin
process(A) is
begin
case baz is
when "000" => A <= '0';
when "001" => A <= '1';
when "010" => A <= '1';
when "011" => A <= '1';
when "100" => A <= '0';
when "101" => A <= '1';
when "110" => A <= '1';
when "111" => A <= '1';
end case;
end process;
end behv;
- Nested case synthesis
-- same libraries as before
-- A, B, C and sum are ports of type std_logic
architecture behv of adder is
begin
process(A) is
begin
case A is
when '0' => case B is
when '0' => sum <= '0';
when '1' => sum <= '1';
end case;
when '1' => case C is
when '0' => sum <= '0';
when '1' => sum <= '1';
end case;
end case;
end process;
end behv;
- Synchronized case statement
-- [...]
-- A, clock are ports of type std_logic and
-- sel is a std_logic_vector(2 downto 0)
architecture behv of syncCase is
function rising_edge(c : in std_logic) return std_logic;
begin
process(A) is
begin
if rising_edge(clock) then
case sel is
when "000" => A <= '0';
when "001" => A <= '1';
when "010" => A <= '1';
when "011" => A <= '1';
when "100" => A <= '0';
when "101" => A <= '1';
when "110" => A <= '1';
when "111" => A <= '1';
end case;
end if;
end process;
end behv;
- If statement with complete signal assignments
-- [...]
-- A, B and C are ports of type std_logic
architecture behv of adder is
function rising_edge(c : in std_logic) return boolean;
begin
process(A) is
begin
if A = B then
C <= '0';
else
C <= '1';
end if;
end process;
- Complete nonsensical clusterfuck
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity clufu is
port(A : out std_logic;
B : out std_logic;
Co : out std_logic;
sel : in std_logic_vector(1 downto 0);
enable : in std_logic;
enable2 : in std_logic;
clock : in std_logic);
end clufu;
architecture b of clufu is
function rising_edge(c : in std_logic) return boolean;
begin
process(A) is
begin
if A = B then
if not A then
if rising_edge(clock) then
case sel is
when "00" =>
if rising_edge(clock) and enable = '1' and (not enable2 = '0') then
Co <= '0';
end if;
when "01" => Co <= '1';
when "10" => Co <= '1';
when "11" => Co <= '1';
end case;
end if;
end if;
end if;
end process;
end b;
Due to the current parser's limitations, a new parser needs to be written. I intend to use BNFC for this task. BNFC provides two things:
- A formalism for lexical and syntactic specifications: LBNF
- A program generator that transforms those specs from LBNF into a complete frontend for various languages (of course C/C++ is one ot the target languages)
I transcribed the official syntax (written in EBNF = Extended Backus Naur Form) into LBNF and tested out the frontend generation. In principle this is working now.
However, the real difficult things are yet to come!. LBNF does not support ambiguous context free grammars in particular. That means that it has to be modified in order to resolve this issue. Bison can generate GLR parsers. A rule of thumb is: If your grammar only contains shift/reduce conflicts: Generate a GLR parser and you are golden. VHDL contains more shift/reduce conflicts than one can count and -- in addition to that -- a lot of reduce/reduce conflicts. Since RR-Conflicts makes a context free grammar produce more than one parse tree, the rule-of-thumb solution can't be applied here.
Every glr-ed bison grammar can be equipped with so called merge rules which
deal with RR-conflicts. As the priviously mentioned
article
describes, the merge rules need to keep track of
all scopes and all occuring type, variable, signal, and function declarations in
order to be able to correctly resolve the conflicts. Stephen Williams' parse.y
nicely shows, how this can be achived.
The remaining problem, again, regards the sr-conflicts. Are we really sure that they don't lift the grammar into the set of non-deterministically context free languages? In other words: How do we know for sure, that all remaining sr-conflicts can be resolved solely by the usage of a GLR parser?
This is a non-trivial question and it's answer can possibly constructed with:
- Knowledge of the GLR parsing algorithm. (GLR = LR(n) with n being unlimited)
- Does any parser split, provoked by a SR-conflict, ultimately lead to only one living parser for each path?
I'll elaborate on this topic as soon as I have understood the problem entirely.
Today is a day to celebrate. First actual netlist has been created! Yodl translated this
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity adder is
port(A : in std_logic;
B : in std_logic;
carryIn : in std_logic;
carryOut : out std_logic;
fnord : out std_logic;
sum : out std_logic);
end adder;
architecture behv of adder is
begin
-- sum <= A xor B xor carryIn;
sum <= '0';
carryOut <= (a and b) or
(b and carryIn) or
(a and carryIn);
fnord <= ('1' or '0') and '1';
end behv;
into that:
I did further research on the topic parse all of VHDL 2008. There
is a project that automates away most of the hugely repetitive work of writing an compiler frontend. Moreover, I found a repository on github that contains a copy of VHDL-2008 bnf grammar. Sadly the author simply copy pasted it from the original reference manual. This is unformunate, because the BNF derivative the IEEE authors use in their manual is not at all copy paste friendly because of their glorious semantic rule prefixes.
Hence the standard text contains grammar rules like: package_simple_name ::= foobar. A package_simple_name simply is a simple_name but prefixed for better understandability. Since there is no italic font for plain text files, I now manually have to check the complete grammar (1300 LoC) and remove the semantic prefixes.
Previous notes: Currently I'm able to completely evaluate
generate statements and for loops (for and if; case generate is not supported, but will be).
Speaking of for loops, there is a grain of salt. The VHDL synthesis
standard from 2004 pinpoints that next and exit statements be explicitly
allowed inside of for loops. This is a problem, because in certain cases an
occuring statement of those two types can make the whole loop (statically) non-evaluable.
Thus my current for loop unroller does not support them.
Furthermore I built appropriate infrastructure for AST traversals which is largely functor based and not very well documented at this point of time.
As of now, I also accomplished:
- elsif elimination. The elsif eliminator transforms
if (3=3) then
s1;
elsif (4=4) then
s2;
else
s3;
end if;into
if (3=3) then
s1;
else
if (4=4) then
s2;
else
s3;
end if;
end if;- if/else to case transformation. The functor BranchesToCases transforms
if (3=3) then
s1;
else
if (4=4) then
s2;
else
s3;
end if;
end if;into
case (3=3) is
when TRUE => s1;
when FALSE =>
case (4=4) is
when TRUE => s2;
when FALSE => s3;
end case;
end case;Now the multiplexer structures that are modelled by if/elsif/else-clauses become obvious and are hopefully simple enough to translate to Cliffords RTLIL-API.
A rant about VHDL's grammar: . VHDL's grammar is utterly ambiguous. There are
a lot of reduce/reduce (and even more shift/reduce) conflicts in the grammar.
Reduce/reduce conflicts (in context LR(1)) usually is a very strong implication
for the grammar being in the class of non-deterministic context free languages and
this is bad news because it further implies, that parsing is very very hard.
There already is a pretty good article about this that I want to refer to.
Stephen Williams wrote a pretty slick parse.y that properly matches most of VHDL's syntax. Sadly, there
are some ugly twists that he had to make in order to unambiguously construct just one parse tree for any
given input. I thought a bit and came to the conclusion that it might be best, to rewrite the parser by using
one of bisons newer features: GLR, Generalized LR, an algorithm for ambiguous grammars.
As an example what the current parser cannot (and probably will never be able to) parse is:
architecture beh of ent is
-- some decls
begin
-- this should be parsable, but produces syntax error
result <= foo(fnord => 3, foobar => 4)(3);
-- this is parsable
result <= foo(4, 3)(3);
end beh;The problem is that the alterations of VHDL's grammar also affected how names (identifiers, array indexing, ...) are matched. The standard dictates that a name is parsed as
name -> prefix ( expression {, expression } )
| prefix . suffix
| operator_symbol
| identifier
prefix -> name | function_call
function_call -> name ( association_list )
suffix consists solely of terminal symbols
whereas parse.y specifies prefixes as
prefix -> name
and emulates function calls inside of expressions by misusing the
prefix ( expression {, expression } )
rule.
Be able to generate RTLIL from a subset of VHDL.
Be able to generate (correct) RTLIL from VHDL as specified in IEEE 1076.6-2004.