Frequently Asked Questions

If you have a question about this project, the answer may be here. If not, add it to this document with a pending note

Why don't you use a relay for the A/B/C/D switcher?

This project is still in development and is currently at the proof of concept stage. This is a sensible suggestion, it just hasn't happened yet. Feel free to spec and build one, then open a PR to add to the repo!

Which inverters are supported?

See this page

Could I use this project to use my Leaf battery without removing it from the car?

While technically you could potentially make this work over the CHAdeMO connector, finding a suitable connector is prohibitively expensive. For the price of a Chademo connector alone, you can purchase ~10kWh of stationary storage! The scope of this project is battery reuse outside of a vehicle.

Can I buy this as an off-the-shelf unit?

No. This is a DIY project to enable battery reuse. It should be done by competent individuals who understand the risks involved with HV batteries.

What batteries are supported?

See this page

For the Leaf data connector, do you have a 3d printable plug suitable for use with the current SSR precharge/contactor setup?