Add wUSDM as collateral to USDT market on Optimism

contracts/IERC4626.sol

@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: MIT
+// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC4626.sol)
+
+pragma solidity 0.8.15;
+
+/**
+ * @dev Interface of the ERC-4626 "Tokenized Vault Standard", as defined in
+ * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
+ */
+interface IERC4626  {
+    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);
+
+    event Withdraw(
+        address indexed sender,
+        address indexed receiver,
+        address indexed owner,
+        uint256 assets,
+        uint256 shares
+    );
+
+    /// @dev Returns decimals of the Vault shares.
+    function decimals() external view returns (uint8);
+
+    /**
+     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
+     *
+     * - MUST be an ERC-20 token contract.
+     * - MUST NOT revert.
+     */
+    function asset() external view returns (address assetTokenAddress);
+
+    /**
+     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
+     *
+     * - SHOULD include any compounding that occurs from yield.
+     * - MUST be inclusive of any fees that are charged against assets in the Vault.
+     * - MUST NOT revert.
+     */
+    function totalAssets() external view returns (uint256 totalManagedAssets);
+
+    /**
+     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
+     * scenario where all the conditions are met.
+     *
+     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
+     * - MUST NOT show any variations depending on the caller.
+     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
+     * - MUST NOT revert.
+     *
+     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
+     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
+     * from.
+     */
+    function convertToShares(uint256 assets) external view returns (uint256 shares);
+
+    /**
+     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
+     * scenario where all the conditions are met.
+     *
+     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
+     * - MUST NOT show any variations depending on the caller.
+     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
+     * - MUST NOT revert.
+     *
+     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
+     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
+     * from.
+     */
+    function convertToAssets(uint256 shares) external view returns (uint256 assets);
+
+    /**
+     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
+     * through a deposit call.
+     *
+     * - MUST return a limited value if receiver is subject to some deposit limit.
+     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
+     * - MUST NOT revert.
+     */
+    function maxDeposit(address receiver) external view returns (uint256 maxAssets);
+
+    /**
+     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
+     * current on-chain conditions.
+     *
+     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
+     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
+     *   in the same transaction.
+     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
+     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
+     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
+     * - MUST NOT revert.
+     *
+     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
+     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
+     */
+    function previewDeposit(uint256 assets) external view returns (uint256 shares);
+
+    /**
+     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
+     *
+     * - MUST emit the Deposit event.
+     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
+     *   deposit execution, and are accounted for during deposit.
+     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
+     *   approving enough underlying tokens to the Vault contract, etc).
+     *
+     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
+     */
+    function deposit(uint256 assets, address receiver) external returns (uint256 shares);
+
+    /**
+     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
+     * - MUST return a limited value if receiver is subject to some mint limit.
+     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
+     * - MUST NOT revert.
+     */
+    function maxMint(address receiver) external view returns (uint256 maxShares);
+
+    /**
+     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
+     * current on-chain conditions.
+     *
+     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
+     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
+     *   same transaction.
+     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
+     *   would be accepted, regardless if the user has enough tokens approved, etc.
+     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
+     * - MUST NOT revert.
+     *
+     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
+     * share price or some other type of condition, meaning the depositor will lose assets by minting.
+     */
+    function previewMint(uint256 shares) external view returns (uint256 assets);
+
+    /**
+     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
+     *
+     * - MUST emit the Deposit event.
+     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
+     *   execution, and are accounted for during mint.
+     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
+     *   approving enough underlying tokens to the Vault contract, etc).
+     *
+     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
+     */
+    function mint(uint256 shares, address receiver) external returns (uint256 assets);
+
+    /**
+     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
+     * Vault, through a withdraw call.
+     *
+     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
+     * - MUST NOT revert.
+     */
+    function maxWithdraw(address owner) external view returns (uint256 maxAssets);
+
+    /**
+     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
+     * given current on-chain conditions.
+     *
+     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
+     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
+     *   called
+     *   in the same transaction.
+     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
+     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
+     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
+     * - MUST NOT revert.
+     *
+     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
+     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
+     */
+    function previewWithdraw(uint256 assets) external view returns (uint256 shares);
+
+    /**
+     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
+     *
+     * - MUST emit the Withdraw event.
+     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
+     *   withdraw execution, and are accounted for during withdraw.
+     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
+     *   not having enough shares, etc).
+     *
+     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
+     * Those methods should be performed separately.
+     */
+    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);
+
+    /**
+     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
+     * through a redeem call.
+     *
+     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
+     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
+     * - MUST NOT revert.
+     */
+    function maxRedeem(address owner) external view returns (uint256 maxShares);
+
+    /**
+     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
+     * given current on-chain conditions.
+     *
+     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
+     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
+     *   same transaction.
+     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
+     *   redemption would be accepted, regardless if the user has enough shares, etc.
+     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
+     * - MUST NOT revert.
+     *
+     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
+     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
+     */
+    function previewRedeem(uint256 shares) external view returns (uint256 assets);
+
+    /**
+     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
+     *
+     * - MUST emit the Withdraw event.
+     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
+     *   redeem execution, and are accounted for during redeem.
+     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
+     *   not having enough shares, etc).
+     *
+     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
+     * Those methods should be performed separately.
+     */
+    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
+}

contracts/pricefeeds/PriceFeedWith4626Support.sol

@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: BUSL-1.1
+pragma solidity 0.8.15;
+
+import "../vendor/@chainlink/contracts/src/v0.8/interfaces/AggregatorV3Interface.sol";
+import "../IERC4626.sol";
+import "../IPriceFeed.sol";
+
+/**
+ * @title Price feed for ERC4626 assets
+ * @notice A custom price feed that calculates the price for an ERC4626 asset
+ * @author Compound
+ */
+contract PriceFeedWith4626Support is IPriceFeed {
+    /** Custom errors **/
+    error BadDecimals();
+    error InvalidInt256();
+
+    /// @notice Version of the price feed
+    uint public constant VERSION = 1;
+
+    /// @notice Description of the price feed
+    string public override description;
+
+    /// @notice Number of decimals for returned prices
+    uint8 public immutable override decimals;
+
+    /// @notice Number of decimals for the 4626 rate provider
+    uint8 rateProviderDecimals;
+
+    /// @notice Number of decimals for the underlying asset
+    uint8 underlyingDecimals;
+
+    /// @notice 4626 rate provider
+    address public immutable rateProvider;
+
+    /// @notice Chainlink oracle for the underlying asset
+    address public immutable underlyingPriceFeed;
+
+    /// @notice Combined scale of the two underlying price feeds
+    int public immutable combinedScale;
+
+    /// @notice Scale of this price feed
+    int public immutable priceFeedScale;
+
+    /**
+     * @notice Construct a new 4626 price feed
+     * @param rateProvider_ The address of the 4626 rate provider
+     * @param underlyingPriceFeed_ The address of the underlying asset price feed to fetch prices from
+     * @param decimals_ The number of decimals for the returned prices
+     **/
+    constructor(address rateProvider_, address underlyingPriceFeed_, uint8 decimals_, string memory description_) {
+        rateProvider = rateProvider_;
+        underlyingPriceFeed = underlyingPriceFeed_;
+        rateProviderDecimals = IERC4626(rateProvider_).decimals();
+        underlyingDecimals = AggregatorV3Interface(underlyingPriceFeed_).decimals();
+        combinedScale = signed256(10 ** (rateProviderDecimals + underlyingDecimals));
+        description = description_;
+
+        if (decimals_ > 18) revert BadDecimals();
+        decimals = decimals_;
+        priceFeedScale = int256(10 ** decimals);
+    }
+
+    /**
+     * @notice Get the latest price for the underlying asset
+     * @return roundId Round id from the underlying asset price feed
+     * @return answer Latest price for the underlying asset
+     * @return startedAt Timestamp when the round was started; passed on from the underlying asset price feed
+     * @return updatedAt Timestamp when the round was last updated; passed on from the underlying asset price feed
+     * @return answeredInRound Round id in which the answer was computed; passed on from the underlying asset price feed
+     **/
+    function latestRoundData() override external view returns (uint80, int256, uint256, uint256, uint80) {
+        uint256 rate = IERC4626(rateProvider).convertToAssets(10**rateProviderDecimals);
+        (uint80 roundId_, int256 underlyingPrice, uint256 startedAt_, uint256 updatedAt_, uint80 answeredInRound_) = AggregatorV3Interface(underlyingPriceFeed).latestRoundData();
+
+        if (rate <= 0 || underlyingPrice <= 0) return (roundId_, 0, startedAt_, updatedAt_, answeredInRound_);
+
+        int256 price = signed256(rate) * underlyingPrice * priceFeedScale / combinedScale;
+        return (roundId_, price, startedAt_, updatedAt_, answeredInRound_);
+    }
+
+    function signed256(uint256 n) internal pure returns (int256) {
+        if (n > uint256(type(int256).max)) revert InvalidInt256();
+        return int256(n);
+    }
+
+    /**
+     * @notice Price for the latest round
+     * @return The version of the price feed contract
+     **/
+    function version() external pure returns (uint256) {
+        return VERSION;
+    }
+}