Releases: ciribob/DCS-SimpleRadioStandalone
Release 2.1.0.10
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Hotfix for CH47 - FM radios are now actually FM... Sorry about that 😅
- Enabled encryption for CH47 radios as appropriate
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Full Changelog: 2.1.0.9...2.1.0.10
Release 2.1.0.9
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Adds support for the CH47. Currently only one radio is actually modelled, however SRS has added all the radios as virtual radios. The frequency can be controlled through SRS but the volume through DCS. Be aware - by default all radio volumes are muted by their control knobs being pulled out, and the volume also turned to zero
- Adds support for the Radio Relay feature in the Hornet - thanks to @gcask
- Adds support for the SRS plugin interface to be used for CA for custom frequencies - thanks to @TaeruAlethea !
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Full Changelog: 2.1.0.8...2.1.0.9
Contributors
Assets 4
Release 2.1.0.8
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Fix for the Apache cockpit controls - thanks to @FalcoGer
- Possible fix for a crash when USB controllers are unplugged or the ID changes while in use
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Full Changelog: 2.1.0.7...2.1.0.8
Contributors
Assets 4
Release 2.1.0.7
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Finishes support for the OH58 with: Collective Controls, Encryption and FM radio relay thanks to @victrox-dev !
- For Encryption - the radio channel will be used as the key - swap channels to swap keys and customise the frequency on the channel if you want to tune it and keep that key
- Adds Channels to the SRS overlay for the OH58
- Fixes cold start F15E not connecting to SRS
- Fixes the toggle for Autoconnect - it'll actually disable it now when togged off
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Full Changelog: 2.1.0.5...2.1.0.6
Contributors
Assets 4
Release 2.1.0.6
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Adds support and fixes for the OH58 - thank you Polychop for the support!
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Full Changelog: 2.1.0.5...2.1.0.6
Release 2.1.0.5
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Adds a new profile option to opt-out of expansion radios (if they're enabled by the server)
- Adds a new type of Receive ONLY radio - indicated by RX on the overlay to better support the new (and excellent) HB F4
- Linked to the point above - made the second F4 radio RX only (https://f4.manuals.heatblur.se/systems/nav_com/uhf.html)
- Fix for the F16 IFF / Transponder turning off when toggling the pilot in the cockpit (yes really...)
- Adds support for Guard on the F15E
- Adds support for the A10C II volume controls on the AN/ARC-210 VHF/UHF (press the menu button then turn the Channel wheel slowly apparently). Its a bit flaky but if you're slow it'll be fine
- Fixed radio volume sliders to more appropriately change volume depending on the position (they're no longer linear)
- Fixed the Intercom Ambient Cockpit Audio setting not saving correctly when enabled
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Full Changelog: 2.1.0.4...2.1.0.5
Release 2.1.0.4
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Adds support for Chinese Localisation on the SRS Server - thanks to @omltcat
- Various localisation fixes on the client thanks to @omltcat
- OH6 control changes as requested by the mod authors
- OH6 volume fix
- Updates to the F4 SRS integration ahead of the release
- Added a new option as requested to enable Ambient Cockpit Effects on Intercom (off by default)
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Full Changelog: 2.1.0.3...2.1.0.4
Contributors
Assets 4
Release 2.1.0.3
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Adds support for the OH6 Mod and other aircraft. Thanks to @Domi96nik for his aircraft addition as well!
- Added improved MIDS handling - You can now create a fixed channel file or if not by default it'll generate all 125 MIDS channels. Thanks to @TaeruAlethea for their help on this too.
- Added a new Create button on non modelled radios to create the fixed channel file for you to make it easier to use
- Channel number is now honoured in the AWACS JSON config - thank to @gcask
- Support for the AH-64D Transponder and Encryption thanks to @victrox-dev . This also includes better seat detection allowing cockpit controls when soloing as well!
- New minimal overlay option added (toggle through the modes to see) thank to @gcask
- Added support for the F15E Intercom volume in cockpit for both seats
- Changed the hotmic 15E intercom switch to only be hot in one position
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Full Changelog: 2.1.0.2...2.1.0.3
Contributors
Assets 4
Release 2.1.0.2
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Adds support for the F1 (all variants) Mode 2 support
- Fixes F1 radios (thanks to @cuken ) caused by the new IFF / Transponder module in the F1
- Added the current unit onto the SRS main screen to make it easier to create the right profile names
- Enabled EAM mode to have its own profile autoselected if you want - just created a profile called EAM - thanks to @gcask for the PR
- Enabled Combined Arms / Spectator to have its own profile autoselected if you want - just created a profile called CA
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Full Changelog: 2.1.0.1...2.1.0.2
Contributors
Assets 4
Release 2.1.0.1
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Adds support for Mode 2 for the F15E and Mirage. Huge huge thank you to RAZBAM for making this possible! Note: Mode 2 will not be sent to LotATC until the SRS server is updated. All other modes will work as before regardless
- Fix for F15 volume thanks to @mcphailtom
- Removed Ambient cockpit effect on intercom
- Reduced Ambient cockpit effect over MIDS - thanks for the feedback!
- Added support for MIDS on the AWACS overlay using a custom AWACS json ( awacs-radios-custom.json or editing awacs-radios.json directly). More details on the SRS Discord
- Added support to send Mode 2 to LotATC
- Changed the auto-updater logic in the SRS client to only update SRS once DCS is closed automatically
- Added a check to the SRS-Autoupdater to block the update until DCS is closed as well
- Fixed LotATC being sent transponder codes when the transponder was disabled on the client
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. Ports must be opened manually using Port Forwarding or similar techniques.
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Full Changelog: 2.1.0.0...2.1.0.1
