Remove power on behaviour for Z111PL0H-1JX/Woolley SA-028

[kbullet]

Got a couple more of these Woolley plugs, though seems like this batch I got with the model Z111PL0H-1JX identifier do not have power on behavior. (also mentioned by Koenkk/zigbee2mqtt#10282 (comment))

db entry:

{"id":122,"type":"Router","ieeeAddr":"0x00124b0025798705","nwkAddr":50011,"manufId":4742,"manufName":"SONOFF","powerSource":"Mains (single phase)","modelId":"Z111PL0H-1JX","epList":[1,13,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":256,"inClusterList":[0,3,4,5,6,64599,64672],"outClusterList":[25],"clusters":{"genOnOff":{"attributes":{"onOff":1}},"genBasic":{"attributes":{"modelId":"Z111PL0H-1JX","manufacturerName":"SONOFF","powerSource":1,"zclVersion":3,"hwVersion":1,"dateCode":"20211223","swBuildId":"1.0.1"}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b002f8b1364","endpointID":1},{"cluster":0,"type":"endpoint","deviceIeeeAddress":"0x00124b002f8b1364","endpointID":1},{"cluster":25,"type":"endpoint","deviceIeeeAddress":"0x00124b002f8b1364","endpointID":1}],"configuredReportings":[{"cluster":6,"attrId":0,"minRepIntval":0,"maxRepIntval":65000,"repChange":1}],"meta":{}},"13":{"profId":49246,"epId":13,"devId":57694,"inClusterList":[4096],"outClusterList":[4096],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"hwVersion":1,"dateCode":"20211223","swBuildId":"1.0.1","zclVersion":3,"interviewCompleted":true,"meta":{"configured":332242049},"lastSeen":1734876337875}

When trying to set power on behavior:

[2024-12-22 19:23:44] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Outlet Living Room 2', payload '{"last_seen":"2024-12-22T19:23:44+07:00","linkquality":123,"power_on_behavior":null,"state":"ON"}'
[2024-12-22 19:23:44] error: z2m: Publish 'get' 'power_on_behavior' to 'Outlet Living Room 2' failed: 'Error: ZCL command 0x00124b0025798705/1 genOnOff.read(["startUpOnOff"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (Status 'UNSUPPORTED_ATTRIBUTE')'
[2024-12-22 19:23:47] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Outlet Living Room 2', payload '{"last_seen":"2024-12-22T19:23:47+07:00","linkquality":123,"power_on_behavior":null,"state":"ON"}'
[2024-12-22 19:23:47] error: z2m: Publish 'set' 'power_on_behavior' to 'Outlet Living Room 2' failed: 'Error: Got UNSUPPORTED_ATTRIBUTE error, device does not support power on behaviour'

[Koenkk]

Please add it to here instead, I guess the SA-029 and SA-028 also don't support it.

[kbullet]

Thanks for the review. Though seems like there are different versions/firmware of the SA-028 is being sold. One with power on behavior (SA-028 modelId) and one without (Z111PL0H-1JX) with exactly the same packaging and plug type.

Cant say for SA-029 since I don't have one on hand, it is suppose to be only a different socket type but then who knows what they decide to enable on the firmware 🙃

This is the db entry for the other SA-028 with power on behavior

{"id":117,"type":"Router","ieeeAddr":"0x7cb94c61881d0000","nwkAddr":22814,"manufId":4742,"manufName":"Sonoff","powerSource":"Mains (single phase)","modelId":"SA-028-1","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":9,"inClusterList":[0,3,4,5,6,4096,64599,64672],"outClusterList":[25],"clusters":{"genBasic":{"attributes":{"stackVersion":0,"hwVersion":0,"zclVersion":8}},"genOnOff":{"attributes":{"onOff":0,"startUpOnOff":255}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b002f8b1364","endpointID":1},{"cluster":25,"type":"endpoint","deviceIeeeAddress":"0x00124b002f8b1364","endpointID":1}],"configuredReportings":[{"cluster":6,"attrId":0,"minRepIntval":0,"maxRepIntval":65000,"repChange":1}],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":1,"stackVersion":0,"hwVersion":0,"dateCode":"20210610-BL","swBuildId":"1.0.5","zclVersion":8,"interviewCompleted":true,"meta":{"configured":332242049},"lastSeen":1734895050344}

Anyhow I saw there's the S26R2ZB without power on behavior maybe I can move the Z111PL0H-1JX there as another SA-028 white label w/o pob? Instead of creating a completely new/separate model for this to pass the test Wdyt? And leave the SA-028/SA-029 as is.