v1.0.3

Notice 1: Before you install the new version of the server, be sure to run this command to install the required packages:
npm install http path fs express body-parser multer express-session ws express-ws

Notice 2: Do not forget to update the ESPOTADASH arduino library. Arduino Library

Changelogs:

• Introducing the option to Send Commands individually for each registered device directly from the WEB UI. Now, you can run specific functions within the Arduino sketch for each device.
  (Be sure to install the latest version of the library, otherwise it will not work)
• Arduino example sketch has been updated

Arduino sketch

#include "ESPOTADASH.h"

const char* ssid = "Your_SSID";
const char* password = "Your_WiFi_Password";
const char* hostName = "ESP Devices"; // You can modify this to your desired host name
const char* serverAddress = "http://Your_Server_IP:3000"; // Replace with your Node.js server address

unsigned long heartbeatInterval = 10000;     // Modify the heartbeat interval (e.g., 10 seconds)
unsigned long registrationInterval = 30000;  // Modify the registration interval (e.g., 30 seconds)
unsigned long commandCheckInterval = 10000;  // Modify the commandCheck interval (e.g., 10 seconds)
unsigned long updateInterval = 10000;        // Modify the Firmware check Update interval (e.g., 10 seconds)
const char* firmwareVersion = "1.0.0";       // Modify the firmware version

ESPOTADASH ota(ssid, password, hostName, serverAddress, heartbeatInterval, registrationInterval, commandCheckInterval, updateInterval, firmwareVersion);

void setup() {
  ota.begin();
}

void loop() {
  ota.loop();
}

// Implement the processReceivedCommand function here
void ESPOTADASH::processReceivedCommand(const String& command) {
  if (command == "action1") {
    // Perform action 1
    Serial.println("HELLO");
  } else if (command == "action2") {
    // Perform action 2
    Serial.println("ByeBye");
  }
  // Add more conditions for other actions as needed.
}