Skip to content

vidar-team/udp-over-tcp

 
 

Repository files navigation

udp-over-tcp

A library (and binaries) for tunneling UDP datagrams over a TCP stream.

Some programs/protocols only work over UDP. And some networks only allow TCP. This is where udp-over-tcp comes in handy. This library comes in two parts:

  • udp2tcp - Forwards incoming UDP datagrams over a TCP stream. The return stream is translated back to datagrams and sent back out over UDP again. This part can be easily used as both a library and a binary. So it can be run standalone, but can also easily be included in other Rust programs. The UDP socket is connected to the peer address of the first incoming datagram. So one [Udp2Tcp] instance can handle traffic from a single peer only.
  • tcp2udp - Accepts connections over TCP and translates + forwards the incoming stream as UDP datagrams to the destination specified during setup / on the command line. Designed mostly to be a standalone executable to run on servers. But can be consumed as a Rust library as well. tcp2udp continues to accept new incoming TCP connections, and creates a new UDP socket for each. So a single tcp2udp server can be used to service many udp2tcp clients.

Protocol

The format of the data inside the TCP stream is very simple. Each datagram is preceded with a 16 bit unsigned integer in big endian byte order, specifying the length of the datagram.

tcp2udp server example

Make the server listen for TCP connections that it can then forward to a local UDP service. This will listen on 10.0.0.1:5001/TCP and forward anything that comes in to 127.0.0.1:51820/UDP:

user@server $ RUST_LOG=debug tcp2udp \
    --tcp-listen 10.0.0.0:5001 \
    --udp-forward 127.0.0.1:51820

RUST_LOG can be used to set logging level. See documentation for env_logger for information. The crate must be built with the env_logger feature for this to be active.

REDACT_LOGS=1 can be set to redact the IPs of the peers using the service from the logs. Allows having logging turned on but without storing potentially user sensitive data to disk.

udp2tcp example

This is one way you could integrate udp2tcp into your Rust program. This will connect a TCP socket to 1.2.3.4:9000 and bind a UDP socket to a random port on the loopback interface. It will then connect the UDP socket to the socket addr of the first incoming datagram and start forwarding all traffic to (and from) the TCP socket.

let udp_listen_addr = "127.0.0.1:0".parse().unwrap();
let tcp_forward_addr = "1.2.3.4:9000".parse().unwrap();

// Create a UDP -> TCP forwarder. This will connect the TCP socket
// to `tcp_forward_addr`
let udp2tcp = udp_over_tcp::Udp2Tcp::new(
    udp_listen_addr,
    tcp_forward_addr,
    udp_over_tcp::TcpOptions::default(),
)
.await?;

// Read out which address the UDP actually bound to. Useful if you specified port
// zero to get a random port from the OS.
let local_udp_addr = udp2tcp.local_udp_addr()?;

spin_up_some_udp_thing(local_udp_addr);

// Run the forwarder until the TCP socket disconnects or an error happens.
udp2tcp.run().await?;

About

Proxy UDP traffic over a TCP stream

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Rust 99.0%
  • Shell 1.0%