Trainer v0.9

Binary release of latest version.

• Version number in title
• progress bar changes to accommodate longer fixture names

List of commit logs since v0.6:

• scp osx version packaging improvements
• scp osx version
• add version number to title
• progress bar adjustment to longer names
• editing README
• editing README
• rename release files
• added (4) into fixture names
• edit readme
• edit readme
• fix DLX DMX values
• temporary remove close(fd) on setting error (OSX fix)

Trainer v0.8

Binary release of latest version.

Trainer v0.7

Binary release of latest version. Tested on DL4X.

trainer v0.6

binary release of latest version

trainer v0.5 "what a colorful world"

Use at your own risk, will eat your files and burn your light!
Functionality has been tried and confirmed but not throughly tested.
You might have to swap some theater/normal values in some cases.

Pre-built binaries for 64bit linux static/dynamic, 32/64bit windows and osx, see below.

Set unit to DMX address 1, DMX Mode 1 and connect to it via RUNIT interface (the fixtures do not support calibration via Art-Net).

Set unit as per user manual → Calibration procedure, then go to menu → Service → Calibrations → Calibrate Colors.
Run trainer.
Select type of unit by pressing c.
Run test (t) to confirm DMX reception.
In trainer, fill in provided RGBW calibration values.
Then run calibration by pressing r.
Wait for this to finish.
Press OK on the Calibrate Colors menu screen.
Profit.
:)

trainer 0.4 "amsterdam's love"

Use at your own risk, will eat your files and burn your light!
Functionality has been tried and confirmed but not throughly tested.
You might have to swap some theater/normal values in some cases.

Pre-built binaries for 64bit linux static/dynamic, 32/64bit windows and osx (coming later), see below.

Set unit to DMX address 1, DMX Mode 1 and connect to it via RUNIT interface (the fixtures do not support calibration via Art-Net).

Set unit as per user manual → Calibration procedure, then go to menu → Service → Calibrations → Calibrate Colors.
Run trainer.
Select type of unit by pressing c.
Run test (t) to confirm DMX reception.
In trainer, fill in provided RGBW calibration values.
Then run calibration by pressing r.
Wait for this to finish.
Press OK on the Calibrate Colors menu screen.
Profit.
:)

first working release

Do not use, will eat your files and kill your light!
Functionality has been tried and confirmed but not throughly tested.

Pre-built binaries for 64bit linux static/dynamic, 32/64bit windows and osx, see below.

Set unit to DMX address 1, DMX Mode 1 and connect to it via RUNIT interface.
Set unit as per user manual → Calibration procedure, then go to menu → Service → Calibrations → Calibrate Colors.
Run trainer.
Select type of unit by pressing c.
Run test (t) to confirm DMX reception.
In trainer, fill in provided RGBW calibration values.
Then run calibration by pressing r. Wait for this to finish.

second release with usb/artnet

USB/Serial port autosearch, Art-Net fall back.
Functionality has never been practically tested. Do not use.
No serial/usb on OSX atm.

Pre-built binaries for 64bit linux static/dynamic, 32/64bit windows, osx.

First release

This is first release. Functionality has never been practically tested. Do not use.