Lywsd02 – Python library to work with Xiaomi Temperature and Humidifier sensor

WORK IN PROGRESS

Install

1. Install it via PyPI:

   pip install lywsd02
   

   Note: use pip3 instead of pip on Raspbian and other systems that default to Python 2.

2. Or directly from the source code:

   git clone https://github.com/h4/lywsd02.git
   python lywsd02/setup.py install
   

   Note: use python3 if your system defaults to Python 2.

Usage (library)

Instantiate client with Lywsd02 mac address

from lywsd02 import Lywsd02Client

mac = '3F:59:C8:80:70:BE'
client = Lywsd02Client(mac)

Read data (each property will be fetched using new connection)

print(client.temperature)
print(client.humidity)

Read temperature as humidity from a single notification

data = client.data
print(data.temperature)
print(data.humidity)


Read data (all data will be retrieved with a single connection)

```python
with client.connect():
    data = client.data
    print(data.temperature)
    print(data.humidity)
    print(client.battery)

Usage (helper script)

This library also installs a simple command-line utility called lywsd02.

It allows to synchronize time and read data from devices:

lywsd02 sync 3F:59:C8:80:70:BE
lywsd02 read 3F:59:C8:80:70:BE 3F:59:C8:80:70:BF

Consult lywsd02 -h to get information on all possible actions.

Note that you may need to replace lywsd02 with ~/.local/bin/lywsd02 or some other path, depending on your installation settings.

Available properties

• client.temperature – Sensor's temperature data in Celsius degrees. Updates with timeout (See below)
• client.humidity – Sensor's humidity data in percent. Updates with timeout
• client.units – Current temperature units displayed on screen. Returns 'C' for Celsius and 'F' for Fahrenheit
• client.time – Current time and timezone offset. Returns as tuple of datetime.datetime and int
• client.battery – Sensor's battery level in percent (0 to 100).
• client.historic_data – Ordered Dictionary of hourly minimum and maximum including timestamp for temperature and humidity

Available setters

• client.units = 'C' – Changes temperature units displayed on screen
• client.time = datetime.datetime.now() - Changes time using local timezone or tz_offset (if set)
• client.tz_offset = 1 - Sets timezone offset in hours that will be used when setting time

Configuration

Client may be initialized with additional kwargs.

• notification_timeout – timeout to wait for temperature and humidity requests. If sensor responds slower then timeout data would not updated. Default value is 5 second.

from lywsd02 import Lywsd02Client

mac = '3F:59:C8:80:70:BE'
client = Lywsd02Client(mac, notification_timeout=1.0, data_request_timeout=30.0)

Troubleshooting

Can't install the package form pip

Error:

ERROR: Command errored out with exit status 1: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-m1_xzdf5/bluepy/setup.py'"'"'; __file__='"'"'/tmp/pip-install-m1_xzdf5/bluepy/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-00nadffm/install-record.txt --single-version-externally-managed --compile Check the logs for full command output.

Fix: Install glib2 library

# On RedHat/CentOS/Fedora:
dnf install glib2-devel

# On Ubuntu/Debian:
apt install libglib2.0-dev

# On Alpine:
apk add glib-dev