pang12,13 (repairs): CMOS battery is adhered to chassis, not mobo

system76 · Sep 11, 2023 · be70b19 · be70b19
1 parent 8b82dda
commit be70b19
Show file tree

Hide file tree

Showing 2 changed files with 2 additions and 2 deletions.
diff --git a/src/models/pang12/repairs.md b/src/models/pang12/repairs.md
@@ -109,7 +109,7 @@ The CMOS battery supplies power to the system's CMOS chip. UEFI settings and the
 
 ![CMOS battery](./img/cmos-battery.webp)
 
-3. If you are replacing the CMOS battery, carefully peel it away from the adhesive holding it to the motherboard.
+3. If you are replacing the CMOS battery, carefully peel it away from the adhesive holding it to the chassis.
 4. To clear the CMOS, [disconnect the main battery](#removing-the-battery), open the lid of the machine, and hold down the power button for at least 15 seconds to discharge any residual energy in the system.
 5. Re-connect the CMOS battery and the main battery, and replace the bottom panel.
 6. Power up the machine. The system may power itself off and on after initial boot; this is normal behavior when the CMOS has been reset.

diff --git a/src/models/pang13/repairs.md b/src/models/pang13/repairs.md
@@ -110,7 +110,7 @@ The CMOS battery supplies power to the system's CMOS chip. UEFI settings and the
 
 ![CMOS battery](./img/cmos-battery.webp)
 
-3. If you are replacing the CMOS battery, carefully peel it away from the adhesive holding it to the motherboard.
+3. If you are replacing the CMOS battery, carefully peel it away from the adhesive holding it to the chassis.
 4. To clear the CMOS, [disconnect the main battery](#removing-the-battery), open the lid of the machine, and hold down the power button for at least 15 seconds to discharge any residual energy in the system.
 5. Re-connect the CMOS battery and the main battery, and replace the bottom panel.
 6. Power up the machine. The system may power itself off and on after initial boot; this is normal behavior when the CMOS has been reset.