resolve [Core] add channel var rtp_2833_payload to overwrite rfc2833-… #2573
+6
−0
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…pt in sip profile The DTMF transmission for bridged calls has been problematic for some time now, particularly when the setting "bypass_media_after_bridge=true" is used. This issue arises when the destination PBX utilizes a different PT value for RFC2833 than what is configured in the sofia profile. To address this challenge, we have implemented a workaround that involves parsing the PT from the switch_r_sdp on the A leg and using a profile with the same value set as rfc2833-pt. For example, if the PT value is 101 on the A-Leg, we use the profile "sofia/outbound101", and if it is 103, we use "sofia/outbound103". This workaround has effectively resolved our DTMF transmission issues. However, this solution requires extensive configuration and coding on our end, which some customers may not find favorable. Additionally, each profile must utilize a different source UDP Port, further complicating the matter. It would be beneficial if there was a channel variable for "rtp_2833_payload" that takes precedence over the profile setting when it is set.
|
related to #1961. @briankwest can you please merge this? |
|
@andywolk can this be merged, so it's going to be in the next release ? |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
…pt in sip profile
The DTMF transmission for bridged calls has been problematic for some time now, particularly when the setting "bypass_media_after_bridge=true" is used. This issue arises when the destination PBX utilizes a different PT value for RFC2833 than what is configured in the sofia profile.
To address this challenge, we have implemented a workaround that involves parsing the PT from the switch_r_sdp on the A leg and using a profile with the same value set as rfc2833-pt. For example, if the PT value is 101 on the A-Leg, we use the profile "sofia/outbound101", and if it is 103, we use "sofia/outbound103". This workaround has effectively resolved our DTMF transmission issues.
However, this solution requires extensive configuration and coding on our end, which some customers may not find favorable. Additionally, each profile must utilize a different source UDP Port, further complicating the matter.
It would be beneficial if there was a channel variable for "rtp_2833_payload" that takes precedence over the profile setting when it is set.