Include connectors by default again #535
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: Export Electronics | |
| on: | |
| push: | |
| pull_request: | |
| jobs: | |
| export-electronics-classic: | |
| name: Export Electronics (Sensor) | |
| runs-on: ubuntu-20.04 | |
| steps: | |
| - name: Checkout code | |
| uses: actions/checkout@v2 | |
| - name: Set up outputs directory | |
| run: mkdir -p electronics/build/outputs | |
| - name: Install dependencies | |
| run: ./electronics/scripts/dependencies.sh | |
| # Sensor board: | |
| - name: Export sensor schematic | |
| run: | | |
| ./electronics/scripts/export_schematic.py electronics/sensor/sensor.sch | |
| cp electronics/build/sensor.pdf electronics/build/outputs/sensor-schematic.pdf | |
| cp electronics/build/sensor.png electronics/build/outputs/sensor-schematic.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export sensor PCB fabrication files | |
| run: | | |
| ./electronics/scripts/export_jlcpcb.py electronics/sensor/sensor.kicad_pcb | |
| cp -r electronics/build/sensor-jlc electronics/build/outputs/sensor-jlc | |
| - name: Export sensor PCB overview PDF | |
| run: | | |
| ./electronics/scripts/generate_pdf.py electronics/sensor/sensor.kicad_pcb | |
| cp electronics/build/sensor-pcb-packet.pdf electronics/build/outputs/sensor-pcb-packet.pdf | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Panelize sensor PCB | |
| run: | | |
| kikit panelize -p electronics/scripts/config/kikit_panelize_sensor.json electronics/sensor/sensor.kicad_pcb electronics/build/panelized_sensor.kicad_pcb | |
| - name: Export panelized sensor PCB SVG | |
| run: | | |
| ./electronics/scripts/generate_svg.py electronics/build/panelized_sensor.kicad_pcb | |
| cp electronics/build/panelized_sensor_merged.png electronics/build/outputs/sensor-panelized-pcb-raster.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/sensor-panelized-pcb-raster.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export panelized sensor PCB fabrication files | |
| run: | | |
| ./electronics/scripts/export_jlcpcb.py electronics/build/panelized_sensor.kicad_pcb | |
| cp -r electronics/build/panelized_sensor-jlc electronics/build/outputs/sensor-panelized-jlc | |
| - name: Export panelized sensor PCB overview PDF | |
| run: | | |
| ./electronics/scripts/generate_pdf.py electronics/build/panelized_sensor.kicad_pcb | |
| cp electronics/build/panelized_sensor-pcb-packet.pdf electronics/build/outputs/sensor-panelized-pcb-packet.pdf | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Archive artifacts | |
| uses: actions/upload-artifact@v4 | |
| if: always() | |
| with: | |
| name: electronics-classic | |
| path: | | |
| electronics/build | |
| - name: Configure AWS Credentials | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| uses: aws-actions/configure-aws-credentials@v1 | |
| with: | |
| aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }} | |
| aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }} | |
| aws-region: us-east-1 | |
| - name: Sync artifacts to S3 | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| run: | | |
| aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-classic --delete --acl public-read --cache-control max-age=0,no-cache | |
| export-electronics-chainlink: | |
| name: Export Electronics (Chainlink Driver) | |
| runs-on: ubuntu-20.04 | |
| steps: | |
| - name: Checkout code | |
| uses: actions/checkout@v2 | |
| - name: Set up outputs directory | |
| run: mkdir -p electronics/build/outputs | |
| - name: Install dependencies | |
| run: ./electronics/scripts/dependencies.sh | |
| # Chainlink Driver: | |
| - name: Export chainlinkDriver schematic | |
| run: | | |
| ./electronics/scripts/export_schematic.py electronics/chainlinkDriver/chainlinkDriver.sch | |
| cp electronics/build/chainlinkDriver.pdf electronics/build/outputs/chainlinkDriver-schematic.pdf | |
| cp electronics/build/chainlinkDriver.png electronics/build/outputs/chainlinkDriver-schematic.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Render chainlinkDriver PCB 3D | |
| run: | | |
| ./electronics/scripts/export_3d.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb --width 2000 --height 800 transform z+ z+ z+ z+ z+ z+ z+ z+ mr rx+ rx+ ry- ry- rz- | |
| cp electronics/build/chainlinkDriver-3d.png electronics/build/outputs/chainlinkDriver-3d.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriver-3d.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export chainlinkDriver JLCPCB fabrication files | |
| run: | | |
| ./electronics/scripts/export_jlcpcb.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb --assembly-schematic electronics/chainlinkDriver/chainlinkDriver.sch --alt-fields LCSC_ALT_ULN2003A LCSC_ALT_SCREW_DIBO | |
| cp -r electronics/build/chainlinkDriver-jlc electronics/build/outputs | |
| - name: Export chainlinkDriver PCB overview PDF | |
| run: | | |
| ./electronics/scripts/generate_pdf.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb | |
| cp electronics/build/chainlinkDriver-pcb-packet.pdf electronics/build/outputs/chainlinkDriver-pcb-packet.pdf | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export chainlinkDriver PCB SVG | |
| run: | | |
| ./electronics/scripts/generate_svg.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb | |
| cp electronics/build/chainlinkDriver_merged.png electronics/build/outputs/chainlinkDriver-pcb-raster.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriver-pcb-raster.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why | |
| - name: Export BOM [chainlinkDriver] | |
| uses: INTI-CMNB/KiBot@c723b51327c2d9b7863672698ae5fd3da58b386e | |
| with: | |
| config: electronics/chainlinkDriver/chainlinkDriver.kibot.yml | |
| dir: electronics/build | |
| schema: 'electronics/chainlinkDriver/chainlinkDriver.sch' | |
| board: 'electronics/chainlinkDriver/chainlinkDriver.kicad_pcb' | |
| - name: Copy BOM outputs | |
| run: cp -r electronics/build/bom electronics/build/outputs | |
| - name: Archive artifacts | |
| uses: actions/upload-artifact@v4 | |
| if: always() | |
| with: | |
| name: electronics-chainlink | |
| path: | | |
| electronics/build | |
| - name: Configure AWS Credentials | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| uses: aws-actions/configure-aws-credentials@v1 | |
| with: | |
| aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }} | |
| aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }} | |
| aws-region: us-east-1 | |
| - name: Sync artifacts to S3 | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| run: | | |
| aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink --delete --acl public-read --cache-control max-age=0,no-cache | |
| export-electronics-chainlink-tester: | |
| name: Export Electronics (Chainlink Driver Tester) | |
| runs-on: ubuntu-20.04 | |
| steps: | |
| - name: Checkout code | |
| uses: actions/checkout@v2 | |
| - name: Set up outputs directory | |
| run: mkdir -p electronics/build/outputs | |
| - name: Install dependencies | |
| run: ./electronics/scripts/dependencies.sh | |
| # Chainlink Driver Tester: | |
| - name: Export schematic [chainlinkDriverTester] | |
| run: | | |
| ./electronics/scripts/export_schematic.py electronics/chainlinkDriverTester/chainlinkDriverTester.sch | |
| cp electronics/build/chainlinkDriverTester.pdf electronics/build/outputs/chainlinkDriverTester-schematic.pdf | |
| cp electronics/build/chainlinkDriverTester.png electronics/build/outputs/chainlinkDriverTester-schematic.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Render PCB 3D [chainlinkDriverTester] | |
| run: | | |
| ./electronics/scripts/export_3d.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb --width 1600 --height 1100 transform z+ z+ z+ z+ z+ mu mr mr rx+ rx+ ry- ry- rz- | |
| cp electronics/build/chainlinkDriverTester-3d.png electronics/build/outputs/chainlinkDriverTester-3d.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriverTester-3d.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export JLCPCB fabrication files [chainlinkDriverTester] | |
| run: | | |
| ./electronics/scripts/export_jlcpcb.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb | |
| cp -r electronics/build/chainlinkDriverTester-jlc electronics/build/outputs | |
| - name: Export PCB overview PDF [chainlinkDriverTester] | |
| run: | | |
| ./electronics/scripts/generate_pdf.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb | |
| cp electronics/build/chainlinkDriverTester-pcb-packet.pdf electronics/build/outputs/chainlinkDriverTester-pcb-packet.pdf | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export PCB SVG [chainlinkDriverTester] | |
| run: | | |
| ./electronics/scripts/generate_svg.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb | |
| cp electronics/build/chainlinkDriverTester_merged.png electronics/build/outputs/chainlinkDriverTester-pcb-raster.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriverTester-pcb-raster.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why | |
| - name: Export BOM [chainlinkDriverTester] | |
| uses: INTI-CMNB/KiBot@c723b51327c2d9b7863672698ae5fd3da58b386e | |
| with: | |
| config: electronics/chainlinkDriverTester/chainlinkDriverTester.kibot.yml | |
| dir: electronics/build | |
| schema: 'electronics/chainlinkDriverTester/chainlinkDriverTester.sch' | |
| board: 'electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb' | |
| - name: Copy BOM outputs | |
| run: cp -r electronics/build/bom electronics/build/outputs | |
| - name: Archive artifacts | |
| uses: actions/upload-artifact@v4 | |
| if: always() | |
| with: | |
| name: electronics-chainlink-tester | |
| path: | | |
| electronics/build | |
| - name: Configure AWS Credentials | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| uses: aws-actions/configure-aws-credentials@v1 | |
| with: | |
| aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }} | |
| aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }} | |
| aws-region: us-east-1 | |
| - name: Sync artifacts to S3 | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| run: | | |
| aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-tester --delete --acl public-read --cache-control max-age=0,no-cache | |
| export-electronics-chainlink-base: | |
| name: Export Electronics (Chainlink Base) | |
| runs-on: ubuntu-20.04 | |
| steps: | |
| - name: Checkout code | |
| uses: actions/checkout@v2 | |
| - name: Set up outputs directory | |
| run: mkdir -p electronics/build/outputs | |
| - name: Install dependencies | |
| run: ./electronics/scripts/dependencies.sh | |
| # Chainlink Base: | |
| - name: Export schematic [chainlinkBase] | |
| run: | | |
| ./electronics/scripts/export_schematic.py electronics/chainlinkBase/chainlinkBase.sch | |
| cp electronics/build/chainlinkBase.pdf electronics/build/outputs/chainlinkBase-schematic.pdf | |
| cp electronics/build/chainlinkBase-0.png electronics/build/outputs/chainlinkBase-schematic.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Render PCB 3D [chainlinkBase] | |
| run: | | |
| ./electronics/scripts/export_3d.py electronics/chainlinkBase/chainlinkBase.kicad_pcb --width 1000 --height 1500 transform z+ z+ mu rx+ rx+ ry- ry- rz- | |
| cp electronics/build/chainlinkBase-3d.png electronics/build/outputs/chainlinkBase-3d.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBase-3d.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export JLCPCB fabrication files [chainlinkBase] | |
| run: | | |
| ./electronics/scripts/export_jlcpcb.py electronics/chainlinkBase/chainlinkBase.kicad_pcb | |
| cp -r electronics/build/chainlinkBase-jlc electronics/build/outputs | |
| - name: Export PCB overview PDF [chainlinkBase] | |
| run: | | |
| ./electronics/scripts/generate_pdf.py electronics/chainlinkBase/chainlinkBase.kicad_pcb | |
| cp electronics/build/chainlinkBase-pcb-packet.pdf electronics/build/outputs/chainlinkBase-pcb-packet.pdf | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export PCB SVG [chainlinkBase] | |
| run: | | |
| ./electronics/scripts/generate_svg.py electronics/chainlinkBase/chainlinkBase.kicad_pcb | |
| cp electronics/build/chainlinkBase_merged.png electronics/build/outputs/chainlinkBase-pcb-raster.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBase-pcb-raster.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why | |
| - name: Export BOM [chainlinkBase] | |
| uses: INTI-CMNB/KiBot@c723b51327c2d9b7863672698ae5fd3da58b386e | |
| with: | |
| config: electronics/chainlinkBase/chainlinkBase.kibot.yml | |
| dir: electronics/build | |
| schema: 'electronics/chainlinkBase/chainlinkBase.sch' | |
| board: 'electronics/chainlinkBase/chainlinkBase.kicad_pcb' | |
| - name: Copy BOM outputs | |
| run: cp -r electronics/build/bom electronics/build/outputs | |
| - name: Archive artifacts | |
| uses: actions/upload-artifact@v4 | |
| if: always() | |
| with: | |
| name: electronics-chainlink-base | |
| path: | | |
| electronics/build | |
| - name: Configure AWS Credentials | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| uses: aws-actions/configure-aws-credentials@v1 | |
| with: | |
| aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }} | |
| aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }} | |
| aws-region: us-east-1 | |
| - name: Sync artifacts to S3 | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| run: | | |
| aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-base --delete --acl public-read --cache-control max-age=0,no-cache | |
| export-electronics-chainlink-buddy-t-display: | |
| name: Export Electronics (Chainlink Buddy T-Display) | |
| runs-on: ubuntu-20.04 | |
| steps: | |
| - name: Checkout code | |
| uses: actions/checkout@v2 | |
| - name: Set up outputs directory | |
| run: mkdir -p electronics/build/outputs | |
| - name: Install dependencies | |
| run: ./electronics/scripts/dependencies.sh | |
| - name: Export schematic [chainlinkBuddyTDisplay] | |
| run: | | |
| ./electronics/scripts/export_schematic.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.sch | |
| cp electronics/build/chainlinkBuddyTDisplay.pdf electronics/build/outputs/chainlinkBuddyTDisplay-schematic.pdf | |
| cp electronics/build/chainlinkBuddyTDisplay.png electronics/build/outputs/chainlinkBuddyTDisplay-schematic.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Render PCB 3D [chainlinkBuddyTDisplay] | |
| run: | | |
| ./electronics/scripts/export_3d.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb --width 1600 --height 1100 transform z+ z+ z+ z+ mr mr mr rx+ rx+ ry- ry- rz- | |
| cp electronics/build/chainlinkBuddyTDisplay-3d.png electronics/build/outputs/chainlinkBuddyTDisplay-3d.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyTDisplay-3d.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export JLCPCB fabrication files [chainlinkBuddyTDisplay] | |
| run: | | |
| ./electronics/scripts/export_jlcpcb.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb | |
| cp -r electronics/build/chainlinkBuddyTDisplay-jlc electronics/build/outputs | |
| - name: Export PCB overview PDF [chainlinkBuddyTDisplay] | |
| run: | | |
| ./electronics/scripts/generate_pdf.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb | |
| cp electronics/build/chainlinkBuddyTDisplay-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyTDisplay-pcb-packet.pdf | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export PCB SVG [chainlinkBuddyTDisplay] | |
| run: | | |
| ./electronics/scripts/generate_svg.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb | |
| cp electronics/build/chainlinkBuddyTDisplay_merged.png electronics/build/outputs/chainlinkBuddyTDisplay-pcb-raster.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyTDisplay-pcb-raster.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Panelize | |
| run: | | |
| kikit panelize -p electronics/chainlinkBuddyTDisplay/kikit_panelize.json electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb | |
| - name: Export panelized PCB SVG | |
| run: | | |
| ./electronics/scripts/generate_svg.py electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb | |
| cp electronics/build/panelized_chainlinkBuddyTDisplay_merged.png electronics/build/outputs/chainlinkBuddyTDisplay-panelized-pcb-raster.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyTDisplay-panelized-pcb-raster.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export panelized PCB fabrication files | |
| run: | | |
| ./electronics/scripts/export_jlcpcb.py electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb | |
| cp -r electronics/build/panelized_chainlinkBuddyTDisplay-jlc electronics/build/outputs/chainlinkBuddyTDisplay-panelized-jlc | |
| - name: Export panelized PCB overview PDF | |
| run: | | |
| ./electronics/scripts/generate_pdf.py electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb | |
| cp electronics/build/panelized_chainlinkBuddyTDisplay-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyTDisplay-panelized-pcb-packet.pdf | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why | |
| - name: Export BOM [chainlinkBuddyTDisplay] | |
| uses: INTI-CMNB/KiBot@c723b51327c2d9b7863672698ae5fd3da58b386e | |
| with: | |
| config: electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kibot.yml | |
| dir: electronics/build | |
| schema: 'electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.sch' | |
| board: 'electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb' | |
| - name: Copy BOM outputs | |
| run: cp -r electronics/build/bom electronics/build/outputs | |
| - name: Archive artifacts | |
| uses: actions/upload-artifact@v4 | |
| if: always() | |
| with: | |
| name: electronics-chainlink-buddy-t-display | |
| path: | | |
| electronics/build | |
| - name: Configure AWS Credentials | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| uses: aws-actions/configure-aws-credentials@v1 | |
| with: | |
| aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }} | |
| aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }} | |
| aws-region: us-east-1 | |
| - name: Sync artifacts to S3 | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| run: | | |
| aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-buddy-t-display --delete --acl public-read --cache-control max-age=0,no-cache | |
| export-electronics-chainlink-buddy-breadboard: | |
| name: Export Electronics (Chainlink Buddy Breadboard) | |
| runs-on: ubuntu-20.04 | |
| steps: | |
| - name: Checkout code | |
| uses: actions/checkout@v2 | |
| - name: Set up outputs directory | |
| run: mkdir -p electronics/build/outputs | |
| - name: Install dependencies | |
| run: ./electronics/scripts/dependencies.sh | |
| - name: Export schematic [chainlinkBuddyBreadboard] | |
| run: | | |
| ./electronics/scripts/export_schematic.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.sch | |
| cp electronics/build/chainlinkBuddyBreadboard.pdf electronics/build/outputs/chainlinkBuddyBreadboard-schematic.pdf | |
| cp electronics/build/chainlinkBuddyBreadboard.png electronics/build/outputs/chainlinkBuddyBreadboard-schematic.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Render PCB 3D [chainlinkBuddyBreadboard] | |
| run: | | |
| ./electronics/scripts/export_3d.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb --width 1600 --height 1100 transform z+ z+ z+ z+ mu rx+ rx+ rx+ rx+ ry+ ry+ ry+ rz+ rz+ | |
| cp electronics/build/chainlinkBuddyBreadboard-3d.png electronics/build/outputs/chainlinkBuddyBreadboard-3d.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyBreadboard-3d.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export JLCPCB fabrication files [chainlinkBuddyBreadboard] | |
| run: | | |
| ./electronics/scripts/export_jlcpcb.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb | |
| cp -r electronics/build/chainlinkBuddyBreadboard-jlc electronics/build/outputs | |
| - name: Export PCB overview PDF [chainlinkBuddyBreadboard] | |
| run: | | |
| ./electronics/scripts/generate_pdf.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb | |
| cp electronics/build/chainlinkBuddyBreadboard-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyBreadboard-pcb-packet.pdf | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export PCB SVG [chainlinkBuddyBreadboard] | |
| run: | | |
| ./electronics/scripts/generate_svg.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb | |
| cp electronics/build/chainlinkBuddyBreadboard_merged.png electronics/build/outputs/chainlinkBuddyBreadboard-pcb-raster.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyBreadboard-pcb-raster.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Panelize | |
| run: | | |
| kikit panelize -p electronics/chainlinkBuddyBreadboard/kikit_panelize.json electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb | |
| - name: Export panelized PCB SVG | |
| run: | | |
| ./electronics/scripts/generate_svg.py electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb | |
| cp electronics/build/panelized_chainlinkBuddyBreadboard_merged.png electronics/build/outputs/chainlinkBuddyBreadboard-panelized-pcb-raster.png | |
| ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyBreadboard-panelized-pcb-raster.png | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| - name: Export panelized PCB fabrication files | |
| run: | | |
| ./electronics/scripts/export_jlcpcb.py electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb | |
| cp -r electronics/build/panelized_chainlinkBuddyBreadboard-jlc electronics/build/outputs/chainlinkBuddyBreadboard-panelized-jlc | |
| - name: Export panelized PCB overview PDF | |
| run: | | |
| ./electronics/scripts/generate_pdf.py electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb | |
| cp electronics/build/panelized_chainlinkBuddyBreadboard-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyBreadboard-panelized-pcb-packet.pdf | |
| env: | |
| PYTHONUNBUFFERED: 1 | |
| # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why | |
| - name: Export BOM [chainlinkBuddyBreadboard] | |
| uses: INTI-CMNB/KiBot@c723b51327c2d9b7863672698ae5fd3da58b386e | |
| with: | |
| config: electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kibot.yml | |
| dir: electronics/build | |
| schema: 'electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.sch' | |
| board: 'electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb' | |
| - name: Copy BOM outputs | |
| run: cp -r electronics/build/bom electronics/build/outputs | |
| - name: Archive artifacts | |
| uses: actions/upload-artifact@v4 | |
| if: always() | |
| with: | |
| name: electronics-chainlink-buddy-breadboard | |
| path: | | |
| electronics/build | |
| - name: Configure AWS Credentials | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| uses: aws-actions/configure-aws-credentials@v1 | |
| with: | |
| aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }} | |
| aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }} | |
| aws-region: us-east-1 | |
| - name: Sync artifacts to S3 | |
| if: github.event_name == 'push' && github.repository_owner == 'scottbez1' | |
| run: | | |
| aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-buddy-breadboard --delete --acl public-read --cache-control max-age=0,no-cache |