-
Notifications
You must be signed in to change notification settings - Fork 32
Home
PysimCoder is an open source rapid control prototyping development tool. It can be used to generate a real time code for various targets.
- Linux (with or without preempt-rt) on PC, Raspberry PI and MicroZed APO board
- NuttX RTOS
- BRIKI card
- STM32H7
- Arduino Firmata
- TOS1A
Specific target has to be compiled before the application is generated using pysimCoder. This is usually done by entering target's directory and running make command there. Typical approach is:
cd pysimCoder
cd CodeGen/your_target_name/devices
make
Note that for NuttX target, you have to copy exported NuttX folder to target folder. This approach is described in NuttX documentation.
PysimCoder can send data to outer world (or receive data) with several options.
- Silicon Heaven Infrastructure support
- TCP/UDP blocks in block diagram
- Serial communication blocks
- Save/read from file
Project requires Python 3.9 runtime to be present on the system. Installation instructions and scripts expect Debian derived distribution and may require adjustments on other systems.
Superuser privileges are necessary for installation of the compiled drivers.
In cases when environment doesn't fulfill the aforementioned conditions, a containerized deployment with one of the provided images is preferable.
Install system dependencies and python libraries
sudo apt install gcc gfortran git cmake binutils emacs python3.9 python3-numpy \
python3-scipy python3-sympy python3-matplotlib python3-pip jupyter-qtconsole \
python3-lxml python3-pyqtgraph libopenblas-dev liblapack-dev libxml2-dev \
libcomedi-dev python3-pyqt5
sudo pip install -r requirements.txt
Alternatively the dependencies can be installed with provided scripts:
sudo python3 ubuntu_dependency_installer.py
sudo python3 python_libs_install.py
Build and install the code as a superuser with:
sudo make
Set environment variables in user .bashrc
make user
You may also install modules for different targets as a normal user with:
make <target>
Finally you launch the application from the command line.
The .bashrc may have to be reloaded beforehand.
pysimCoder
Alternative approach is not to install pysimCoder on the system, but run it directly from the script. You still need Python dependencies mentioned above though. You have to set PYSUPSICTRL variable with the path to pysimCoder directory.
export PYSUPSICTRL=/path/to/pysimCoder
It is recommended to add this export to your system initialization so you do not have to do it every time from new terminal window. Then pysimCoder can be run by executing pysim-run script.
./pysim-run.sh
This will open pysimCoder editor. You can run the script from pysimCoder directory or you can move in anywhere else (just make sure you update the path in the script).
It is now possible to pull a docker image to run pysimCoder in a container.
Install docker (see https://docs.docker.com/engine/install/ubuntu/).
Download a pysimCoder image directly from the Docker Container page:
docker pull robertobucher/pysimcoder:latest
The image can be launched with
$ docker run --rm --env="DISPLAY" --net=host -v $XAUTHORITY:/tmp/.XAuthority -e XAUTHORITY=/tmp/.XAuthority robertobucher/pysimcoder:latest
At the prompt launch
psc
More info and the Dockerfile can be found at https://github.com/robertobucher/pysimCoder-Docker
pysimCoder can run in Windows under WSL.
Simply install some additional packages download pysimCoder and istall it.
sudo apt-get update
sudo apt-det dist-upgrade
and
sudo apt-get install \
gcc \
gfortran \
git \
cmake \
binutils \
emacs \
python3 \
python3-numpy \
python3-scipy \
python3-sympy \
python3-matplotlib \
python3-pip \
jupyter-qtconsole \
python3-lxml \
python3-pyqtgraph \
libopenblas-dev \
liblapack-dev \
libxml2-dev \
libcomedi-dev \
python3-pyqt5 \
python3-qwt \
python3-serial
In Debian the following package should be installed for pyQt6
sudo apt-get install qt6-svg-dev
In Ubuntu the following packages should be installed for pyQt6
sudo apt-get install \
qt6-base-dev \
libqt6svg6-dev
Then move to a directory where to install pysimCoder and do
git clone https://github.com/robertobucher/pysimCoder
cd pysimCoder
make addfiles
make modules
make fmu
sudo make link
make user
make alias
make full_lib