Finite-Set Direct Torque Control via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent Magnet Synchronous Motor

This GitHub page features the EdgeRL toolchain used in the paper "Finite-Set Direct Torque Control via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent Magnet Synchronous Motor"

Read the paper (IEEE Xplore) or watch the video:

Citing:

Please cite the paper if you make use of anything in this repository:

@ARTICLE{TPEL.2023.3303651,
  author={Schenke, Maximilian and Haucke-Korber, Barnabas and Wallscheid, Oliver},
  journal={IEEE Transactions on Power Electronics}, 
  title={Finite-Set Direct Torque Control via Edge-Computing-Assisted Safe Reinforcement Learning for a Permanent-Magnet Synchronous Motor}, 
  year={2023},
  volume={38},
  number={11},
  pages={13741-13756},
  doi={10.1109/TPEL.2023.3303651}}

The toolchain featured in this repository is used for reinforcement learning (RL) applications within real-world experiments. It was originally crafted for finite-set motor control.

State transition samples that have been measured on an available plant system are sent from the test bench computer to an edge computing workstation via TCP/IP. On the workstation, the applied training algorithm (Deep Q Network, DQN) processes the acquired samples in order to determine a new policy for controlling the plant system. The weighting parameters describing the new policy are then sent back to the test bench and can be applied within the operating rapid-control prototyping interface. This enables asynchronous RL for real-world applications without the need to shut down the plant system.

The necessary files for each component of the toolchain are provided in the corresponding folders. For real-time capable inference of the DQN in the test bench application, this contribution utilizes FPGA hardware whose programming was synthezised using MATLAB/Simulink's script-based model generation

Rapid-control prototyping hardware: dSPACE MicroLabBox

Software:

• Test bench PC (Windows):
  • MATLAB / Simulink
  • dSPACE ControlDesk
  • Python
• Edge Workstation (Windows or Linux):
  • Python
  • that's it