Skip to content

madsrune/T41_snooze

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Snooze v6.3.9


Low power library for the Teensy LC/3.2/3.5/3.6/4.0 class microcontrollers.


Teensy 4.0 v2 update!

This is a maintenance update because of a change in the new class structure which the main Snooze Class is now decoupled from the Drivers and HAL. Now sleep*, deepSleepand hibernate work with T_LC and 3.x. Now the T_LC/36 Driver "Touch" works in "sleep" mode.

  • not all drivers work in "sleep" yet.

Example usage:

#include <Snooze.h>
// Load drivers
SnoozeDigital digital;

// install drivers to a SnoozeBlock
SnoozeBlock config(digital);
void setup() {
pinMode(LED_BUILTIN, OUTPUT);
/********************************************************
Define digital pins for waking the teensy up. This
combines pinMode and attachInterrupt in one function.

Teensy 4.0
Digtal pins: all pins

Teensy 3.x
Digital pins: 2,4,6,7,9,10,11,13,16,21,22,26,30,33

Teensy LC
Digital pins: 2,6,7,9,10,11,16,21,22
********************************************************/
digital.pinMode(21, INPUT_PULLUP, RISING);//pin, mode, type
digital.pinMode(22, INPUT_PULLUP, RISING);//pin, mode, type
}

void loop() {
/********************************************************
feed the sleep function its wakeup parameters. Then go
to deepSleep.
********************************************************/
int who = Snooze.deepSleep( config );// return module that woke processor
digitalWrite(LED_BUILTIN, HIGH);
delay(100);
digitalWrite(LED_BUILTIN, LOW);
}

Current Divers:

  1. touch - Using the Kinetis touch module to wake your Teensy. (Teensy 3.5/4.0 does not have Touch)
  2. digital - Wake your Teensy with a RISING or FALLING event on a certain pin.
  3. timer - Use the Low Power timer in milliseconds T3.x/LC, seconds T4.x to wake your Teensy,
  4. alarm - Use the RTC clock to wake your Teensy.
  5. compare - Setup a voltage crossing to wake your Teensy.
  6. usbSerial - Does not wake the teensy it makes USB Serial play nice while using Snooze.
  7. audio - Allows the Audio library to work as normal after waking from sleep, does not wake the Teensy.
  8. spi - Configures the spi pins for low power, does not wake the teensy up.

Next we see the SnoozeBlock only has the timer and digital drivers installed. Even though the Touch driver is loaded it is not installed so it won't get called. In this example either the timer expires or the digital pin is lifted will wake the Teensy up.

#include <Snooze.h>
// Load drivers
SnoozeTouch touch;
SnoozeDigital digital;
SnoozeTimer timer;

// install drivers to a SnoozeBlock
SnoozeBlock config(timer, digital);

void setup() {
pinMode(LED_BUILTIN, OUTPUT);
/********************************************************
* Set Low Power Timer wake up in milliseconds T3.x/LC, 
* seconds T4.x.
********************************************************/
timer.setTimer(5000);// milliseconds
/********************************************************
* Define digital pins for waking the teensy up. This
* combines pinMode and attachInterrupt in one function.
* 
* Teensy 4.0
* Digtal pins: all pins
*
* Teensy 3.x
* Digital pins: 2,4,6,7,9,10,11,13,16,21,22,26,30,33
*
* Teensy LC
* Digital pins: 2,6,7,9,10,11,16,21,22
********************************************************/
digital.pinMode(21, INPUT_PULLUP, RISING);//pin, mode, type
digital.pinMode(22, INPUT_PULLUP, RISING);//pin, mode, type
}

void loop() {
/********************************************************
* feed the sleep function its wakeup parameters. Then go 
* to deepSleep.
********************************************************/
int who = Snooze.deepSleep( config );// return module that woke processor
digitalWrite(LED_BUILTIN, HIGH);
delay(100);
digitalWrite(LED_BUILTIN, LOW);
}

Lets break out each part out so we can see what is going on here:

  1. Include the Snooze library header. This brings in Snooze, SnoozeBlock, HAL and HAL Driver Classes.
    #include <Snooze.h>
  2. Next we load the drivers classes we want visible to install.
SnoozeTouch touch;
SnoozeDigital digital;
SnoozeTimer timer;

3. Here we install only the Timer and Digital drivers to the SnoozeBlock.
SnoozeBlock config(timer, digital);

4. Now we configure the Drivers, typically drivers have some way of changing certain parameters.
timer.setTimer(5000);// milliseconds
digital.pinMode(21, INPUT_PULLUP, RISING);//pin, mode, type
digital.pinMode(22, INPUT_PULLUP, RISING);//pin, mode, type

5. Lastly we supply the SnoozeBlock to whatever sleep function you want to use from the Snooze class. We still have the same three sleep modes
Snooze.sleep( config );
Snooze.deepSleep( config );
Snooze.hibernate( config );

Now that was easy enough lets take deeper look at the library structure.
alt text
As you can see Snooze library has only one Snooze Class but can have multiple SnoozeBlocks which have multiple Drivers. Referring to the first graphic Snooze is 3 Tier Class structure:

  1. Snooze Class
  2. SnoozeBlock Class
  3. Drivers Classes

Snooze Class:

This class is the top tier code for Snooze and handles the calling the low level code. There can only be one instance of this class and must defined globally. It has only three simple low power functions (sleep, deepSleep, hibernate) that take a SnoozeBlock argument. Here is a digram of the code flow for the Snooze class which is important to understand how this library works.

...TODO Snooze Class code flow diagram.

SnoozeBlock Class:

This class works by connecting the Driver Class to the Snooze Class and can have up to 8 class instance defined for any one sketch. This class really does all the glue work to call the drivers before and after sleeping. There are three special virtual functions that need to be explained. 1. enableDriver - Driver can override this function, it is called right before sleeping. 2. disableDriver - Driver can override this function, it gets called right after sleeping. 3. clearFlags - Driver can override this function, typically gets called from an interrupt defined in the HAL.

Driver Class:

...

HAL:

The HAL (Hardware Abstraction Layer) is where each type of microcrontroller adds it's low power functionality. The SnoozeBlock is decoupled from any HAL so adding new micros archtechures in the future will be possible. ---

alt text

alt text

alt text

alt text

About

Teensy Low Power Library

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 57.7%
  • C 42.3%