Update .config

devices/mediatek_filogic/.config

@@ -29,3 +29,5 @@ CONFIG_TARGET_DEVICE_mediatek_filogic_DEVICE_cmcc_a10=y
 CONFIG_TARGET_DEVICE_mediatek_filogic_DEVICE_konka_komi-a31=y
 CONFIG_TARGET_DEVICE_mediatek_filogic_DEVICE_imou_lc-hx3001=y
 CONFIG_PACKAGE_luci-ssl=y # uhttpd服务
+
+CONFIG_PACKAGE_oscam=m

devices/qualcommax_ipq60xx/.config

@@ -6,8 +6,14 @@ CONFIG_TARGET_DEVICE_qualcommax_ipq60xx_DEVICE_glinet_gl-ax1800=y
 CONFIG_TARGET_DEVICE_qualcommax_ipq60xx_DEVICE_glinet_gl-axt1800=y
 CONFIG_TARGET_DEVICE_qualcommax_ipq60xx_DEVICE_qihoo_360v6=y
 CONFIG_TARGET_DEVICE_qualcommax_ipq60xx_DEVICE_zn_m2=y
+CONFIG_TARGET_DEVICE_qualcommax_ipq60xx_DEVICE_huasifei_ipq6018-hr6001=y
+CONFIG_TARGET_DEVICE_qualcommax_ipq60xx_DEVICE_ipq6018_ipq6018-l6018=y
+CONFIG_TARGET_DEVICE_qualcommax_ipq60xx_DEVICE_ipq6018_ipq6018-cpr-regulator=y
+CONFIG_TARGET_DEVICE_qualcommax_ipq60xx_DEVICE_ipq6018_ipq6018-cp-cpu=y
+CONFIG_TARGET_DEVICE_qualcommax_ipq60xx_DEVICE_ipq6018_ipq6018-cp03-cpu=y
+CONFIG_TARGET_DEVICE_qualcommax_ipq60xx_DEVICE_ipq60xx_ipq60xx-nss=y
 CONFIG_TARGET_ALL_PROFILES=y
 
 CONFIG_PACKAGE_kmod-qca-nss-cfi-cryptoapi=n
 
-CONFIG_PACKAGE_luci-ssl=y # uhttpd服务
+CONFIG_PACKAGE_luci-ssl=y # uhttpd服务

devices/qualcommax_ipq60xx/diy/package/firmware/ipq-wifi/src/Makefile

@@ -0,0 +1,178 @@
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/version.mk
+
+PKG_NAME:=ipq-wifi
+PKG_RELEASE:=1
+PKG_FLAGS:=nonshared
+
+include $(INCLUDE_DIR)/package.mk
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+endef
+
+define Build/Compile
+endef
+
+# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
+# to generate the board-* files here.
+#
+# This is intended to be used on an interim basis until device-specific
+# board data for new devices is available through the upstream compilation
+#
+# Please send a mail with your device-specific board files upstream.
+# You can find instructions and examples on the linux-wireless wiki:
+# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
+
+ALLWIFIBOARDS:= \
+	8dev_habanero-dvk \
+	aruba_ap-303 \
+	asus_rt-ac42u \
+	avm_fritzrepeater-1200 \
+	buffalo_wtr-m2133hp \
+	cellc_rtl30vw \
+	devolo_magic-2-wifi-next \
+	dlink_dap2610 \
+	edgecore_eap102 \
+	edgecore_ecw5410 \
+	edgecore_oap100 \
+	edimax_cax1800 \
+	engenius_eap2200 \
+	engenius_emd1 \
+	engenius_emr3500 \
+	ezviz_cs-w3-wd1200g-eup \
+	glinet_gl-ap1300 \
+	glinet_gl-b2200 \
+	glinet_gl-s1300 \
+	google_wifi \
+	linksys_ea8300 \
+	linksys_mr8300-v0 \
+	luma_wrtq-329acn \
+	mikrotik_cap-ac \
+	mikrotik_hap-ac2 \
+	mikrotik_hap-ac3 \
+	mikrotik_sxtsq-5-ac \
+	mobipromo_cm520-79f \
+	nec_wg2600hp3 \
+	p2w_r619ac \
+	plasmacloud_pa1200 \
+	plasmacloud_pa2200 \
+	qnap_301w \
+	qxwlan_e2600ac-c1 \
+	qxwlan_e2600ac-c2 \
+	teltonika_rutx \
+	redmi_ax6 \
+	xiaomi_ax3600 \
+	xiaomi_ax9000 \
+	zte_mf286d
+
+ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
+
+define Package/ipq-wifi-default
+  SUBMENU:=ath10k Board-Specific Overrides
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_ipq807x)
+  TITLE:=Custom Board
+endef
+
+define ipq-wifi-install-one-to
+  $(INSTALL_DIR)  $(2)/lib/firmware/ath10k/$(3)/
+  $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
+endef
+
+define ipq-wifi-install-ath11-one-to
+  $(INSTALL_DIR)  $(2)/lib/firmware/ath11k/$(3)/
+  $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath11k/$(3)/board-2.bin
+endef
+
+define ipq-wifi-install-one
+  $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
+  $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
+  $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
+  $(if $(filter $(suffix $(1)),.QCA9889 .qca9889),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA9887/hw1.0),\
+  $(if $(filter $(suffix $(1)),.IPQ8074 .ipq8074),\
+    $(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ8074/hw2.0),\
+    $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
+  )))))
+
+endef
+# Blank line required at end of above define due to foreach context
+
+define generate-ipq-wifi-package
+  define Package/ipq-wifi-$(1)
+    $(call Package/ipq-wifi-default)
+    TITLE:=board-2.bin Overrides for $(2)
+    CONFLICTS:=$(PREV_BOARD)
+  endef
+
+  define Package/ipq-wifi-$(1)/description
+The $(2) requires board-specific, reference ("cal") data
+that is not yet present in the upstream wireless firmware distribution.
+
+This package supplies board-2.bin file(s) that, in the interim,
+overwrite those supplied by the ath10k-firmware-* packages.
+
+This is package is only necessary for the $(2).
+
+Do not install it for any other device!
+  endef
+
+  define Package/ipq-wifi-$(1)/install-overlay
+    $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\
+      $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
+  endef
+
+  PREV_BOARD+=ipq-wifi-$(1)
+endef
+
+# Add board name to ALLWIFIBOARDS
+# Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
+# Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
+
+$(eval $(call generate-ipq-wifi-package,8dev_habanero-dvk,8devices Habanero DVK))
+$(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
+$(eval $(call generate-ipq-wifi-package,asus_rt-ac42u,ASUS RT-AC42U))
+$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
+$(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP))
+$(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW))
+$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
+$(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610))
+$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
+$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
+$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
+$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
+$(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200))
+$(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
+$(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
+$(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-b2200,GL.iNet GL-B2200))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
+$(eval $(call generate-ipq-wifi-package,google_wifi,Google WiFi))
+$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
+$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
+$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
+$(eval $(call generate-ipq-wifi-package,mikrotik_cap-ac,Mikrotik cAP ac))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac3,Mikrotik hAP ac3))
+$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
+$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
+$(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
+$(eval $(call generate-ipq-wifi-package,p2w_r619ac,P&W R619AC))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa2200,Plasma Cloud PA2200))
+$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
+$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac-c1,Qxwlan E2600AC C1))
+$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac-c2,Qxwlan E2600AC C2))
+$(eval $(call generate-ipq-wifi-package,teltonika_rutx,Teltonika RUTX))
+$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
+$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
+$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
+$(eval $(call generate-ipq-wifi-package,zte_mf286d,ZTE MF286D))
+
+$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))

devices/qualcommax_ipq60xx/diy/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-cp-cpu.dtsi

@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+&CPU0 {
+	operating-points-v2 = <&cpu_opp_table>;
+	voltage-tolerance = <1>;
+	cpu-supply = <&apc_vreg>;
+};
+
+&CPU1 {
+	operating-points-v2 = <&cpu_opp_table>;
+	voltage-tolerance = <1>;
+	cpu-supply = <&apc_vreg>;
+};
+
+&CPU2 {
+	operating-points-v2 = <&cpu_opp_table>;
+	voltage-tolerance = <1>;
+	cpu-supply = <&apc_vreg>;
+};
+
+&CPU3 {
+	operating-points-v2 = <&cpu_opp_table>;
+	cpu-supply = <&apc_vreg>;
+};
+
+&cpus {
+	cpu_opp_table: cpu_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-0 {
+			opp-hz = /bits/ 64 <0>;
+			opp-microvolt = <0>;
+			clock-latency-ns = <200000>;
+		};
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <2>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <3>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-microvolt = <4>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <6>;
+			clock-latency-ns = <200000>;
+		};
+	};
+};

devices/qualcommax_ipq60xx/diy/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-cp03-cpu.dtsi

@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+&CPU0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&CPU1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&CPU2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&CPU3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpus {
+	cpu_opp_table: cpu_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-0 {
+			opp-hz = /bits/ 64 <0>;
+			opp-microvolt = <0>;
+			clock-latency-ns = <200000>;
+		};
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <2>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <2>;
+			clock-latency-ns = <200000>;
+		};
+	};
+};