test-network-k8s: Introduce initial support for BFT orderers (#1294)

This patch adds initial support for BFT orderers in the test-network-k8s.
When `TEST_NETWORK_ORDERER_TYPE` is set to `bft`, the network launches
four orderers configured with SmartBFT.

Signed-off-by: Tatsuya Sato <[email protected]>

test-network-k8s/config/org0/bft/configtx-template.yaml

@@ -0,0 +1,358 @@
+# Copyright IBM Corp. All Rights Reserved.
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+---
+################################################################################
+#
+#   Section: Organizations
+#
+#   - This section defines the different organizational identities which will
+#   be referenced later in the configuration.
+#
+################################################################################
+Organizations:
+
+  # SampleOrg defines an MSP using the sampleconfig.  It should never be used
+  # in production but may be used as a template for other definitions
+  - &OrdererOrg
+    # DefaultOrg defines the organization which is used in the sampleconfig
+    # of the fabric.git development environment
+    Name: OrdererOrg
+
+    # ID to load the MSP definition as
+    ID: OrdererMSP
+
+    # MSPDir is the filesystem path which contains the MSP configuration
+    MSPDir: ./channel-msp/ordererOrganizations/org0/msp
+
+    # Policies defines the set of policies at this level of the config tree
+    # For organization policies, their canonical path is usually
+    #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
+    Policies:
+      Readers:
+        Type: Signature
+        Rule: "OR('OrdererMSP.member')"
+      Writers:
+        Type: Signature
+        Rule: "OR('OrdererMSP.member')"
+      Admins:
+        Type: Signature
+        Rule: "OR('OrdererMSP.admin')"
+
+    OrdererEndpoints:
+      - org0-orderer1.${ORG0_NS}.svc.cluster.local:6050
+      - org0-orderer2.${ORG0_NS}.svc.cluster.local:6050
+      - org0-orderer3.${ORG0_NS}.svc.cluster.local:6050
+      - org0-orderer4.${ORG0_NS}.svc.cluster.local:6050
+
+  - &Org1
+    # DefaultOrg defines the organization which is used in the sampleconfig
+    # of the fabric.git development environment
+    Name: Org1MSP
+
+    # ID to load the MSP definition as
+    ID: Org1MSP
+
+    MSPDir: ./channel-msp/peerOrganizations/org1/msp
+
+    # Policies defines the set of policies at this level of the config tree
+    # For organization policies, their canonical path is usually
+    #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
+    Policies:
+      Readers:
+        Type: Signature
+        Rule: "OR('Org1MSP.admin', 'Org1MSP.peer', 'Org1MSP.client')"
+      Writers:
+        Type: Signature
+        Rule: "OR('Org1MSP.admin', 'Org1MSP.client')"
+      Admins:
+        Type: Signature
+        Rule: "OR('Org1MSP.admin')"
+      Endorsement:
+        Type: Signature
+        Rule: "OR('Org1MSP.peer')"
+
+    # leave this flag set to true.
+    AnchorPeers:
+      # AnchorPeers defines the location of peers which can be used
+      # for cross org gossip communication.  Note, this value is only
+      # encoded in the genesis block in the Application section context
+      - Host: org1-peer1.${ORG1_NS}.svc.cluster.local
+        Port: 7051
+
+  - &Org2
+    # DefaultOrg defines the organization which is used in the sampleconfig
+    # of the fabric.git development environment
+    Name: Org2MSP
+
+    # ID to load the MSP definition as
+    ID: Org2MSP
+
+    MSPDir: ./channel-msp/peerOrganizations/org2/msp
+
+    # Policies defines the set of policies at this level of the config tree
+    # For organization policies, their canonical path is usually
+    #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
+    Policies:
+      Readers:
+        Type: Signature
+        Rule: "OR('Org2MSP.admin', 'Org2MSP.peer', 'Org2MSP.client')"
+      Writers:
+        Type: Signature
+        Rule: "OR('Org2MSP.admin', 'Org2MSP.client')"
+      Admins:
+        Type: Signature
+        Rule: "OR('Org2MSP.admin')"
+      Endorsement:
+        Type: Signature
+        Rule: "OR('Org2MSP.peer')"
+
+    AnchorPeers:
+      # AnchorPeers defines the location of peers which can be used
+      # for cross org gossip communication.  Note, this value is only
+      # encoded in the genesis block in the Application section context
+      - Host: org2-peer1.${ORG2_NS}.svc.cluster.local
+        Port: 7051
+
+################################################################################
+#
+#   SECTION: Capabilities
+#
+#   - This section defines the capabilities of fabric network. This is a new
+#   concept as of v1.1.0 and should not be utilized in mixed networks with
+#   v1.0.x peers and orderers.  Capabilities define features which must be
+#   present in a fabric binary for that binary to safely participate in the
+#   fabric network.  For instance, if a new MSP type is added, newer binaries
+#   might recognize and validate the signatures from this type, while older
+#   binaries without this support would be unable to validate those
+#   transactions.  This could lead to different versions of the fabric binaries
+#   having different world states.  Instead, defining a capability for a channel
+#   informs those binaries without this capability that they must cease
+#   processing transactions until they have been upgraded.  For v1.0.x if any
+#   capabilities are defined (including a map with all capabilities turned off)
+#   then the v1.0.x peer will deliberately crash.
+#
+################################################################################
+Capabilities:
+  # Channel capabilities apply to both the orderers and the peers and must be
+  # supported by both.
+  # Set the value of the capability to true to require it.
+  Channel: &ChannelCapabilities
+    # V3.0 for Channel is a catchall flag for behavior which has been
+    # determined to be desired for all orderers and peers running at the v3.0.0
+    # level, but which would be incompatible with orderers and peers from
+    # prior releases.
+    # Prior to enabling V3.0 channel capabilities, ensure that all
+    # orderers and peers on a channel are at v3.0.0 or later.
+    V3_0: true
+
+  # Orderer capabilities apply only to the orderers, and may be safely
+  # used with prior release peers.
+  # Set the value of the capability to true to require it.
+  Orderer: &OrdererCapabilities
+    # V2_0 orderer capability ensures that orderers behave according
+    # to v2.0 orderer capabilities. Orderers from
+    # prior releases would behave in an incompatible way, and are therefore
+    # not able to participate in channels at v2.0 orderer capability.
+    # Prior to enabling V2.0 orderer capabilities, ensure that all
+    # orderers on channel are at v2.0.0 or later.
+    V2_0: true
+
+  # Application capabilities apply only to the peer network, and may be safely
+  # used with prior release orderers.
+  # Set the value of the capability to true to require it.
+  Application: &ApplicationCapabilities
+    # V2_0 application capability ensures that peers behave according
+    # to v2.0 application capabilities. Peers from
+    # prior releases would behave in an incompatible way, and are therefore
+    # not able to participate in channels at v2.0 application capability.
+    # Prior to enabling V2.0 application capabilities, ensure that all
+    # peers on channel are at v2.0.0 or later.
+    V2_5: true
+
+################################################################################
+#
+#   SECTION: Application
+#
+#   - This section defines the values to encode into a config transaction or
+#   genesis block for application related parameters
+#
+################################################################################
+Application: &ApplicationDefaults
+
+  # Organizations is the list of orgs which are defined as participants on
+  # the application side of the network
+  Organizations:
+
+  # Policies defines the set of policies at this level of the config tree
+  # For Application policies, their canonical path is
+  #   /Channel/Application/<PolicyName>
+  Policies:
+    Readers:
+      Type: ImplicitMeta
+      Rule: "ANY Readers"
+    Writers:
+      Type: ImplicitMeta
+      Rule: "ANY Writers"
+    Admins:
+      Type: ImplicitMeta
+      Rule: "MAJORITY Admins"
+    LifecycleEndorsement:
+      Type: Signature
+      Rule: "OR('Org1MSP.peer','Org2MSP.peer')"
+    Endorsement:
+      Type: Signature
+      Rule: "OR('Org1MSP.peer','Org2MSP.peer')"
+
+  Capabilities:
+    <<: *ApplicationCapabilities
+################################################################################
+#
+#   SECTION: Orderer
+#
+#   - This section defines the values to encode into a config transaction or
+#   genesis block for orderer related parameters
+#
+################################################################################
+Orderer: &OrdererDefaults
+  # Batch Timeout: The amount of time to wait before creating a batch
+  BatchTimeout: 2s
+
+  # Batch Size: Controls the number of messages batched into a block
+  BatchSize:
+
+    # Max Message Count: The maximum number of messages to permit in a batch
+    MaxMessageCount: 10
+
+    # Absolute Max Bytes: The absolute maximum number of bytes allowed for
+    # the serialized messages in a batch.
+    AbsoluteMaxBytes: 99 MB
+
+    # Preferred Max Bytes: The preferred maximum number of bytes allowed for
+    # the serialized messages in a batch. A message larger than the preferred
+    # max bytes will result in a batch larger than preferred max bytes.
+    PreferredMaxBytes: 512 KB
+
+  # Organizations is the list of orgs which are defined as participants on
+  # the orderer side of the network
+  Organizations:
+
+  # Policies defines the set of policies at this level of the config tree
+  # For Orderer policies, their canonical path is
+  #   /Channel/Orderer/<PolicyName>
+  Policies:
+    Readers:
+      Type: ImplicitMeta
+      Rule: "ANY Readers"
+    Writers:
+      Type: ImplicitMeta
+      Rule: "ANY Writers"
+    Admins:
+      Type: ImplicitMeta
+      Rule: "MAJORITY Admins"
+    # BlockValidation specifies what signatures must be included in the block
+    # from the orderer for the peer to validate it.
+    BlockValidation:
+      Type: ImplicitMeta
+      Rule: "ANY Writers"
+
+################################################################################
+#
+#   CHANNEL
+#
+#   This section defines the values to encode into a config transaction or
+#   genesis block for channel related parameters.
+#
+################################################################################
+Channel: &ChannelDefaults
+  # Policies defines the set of policies at this level of the config tree
+  # For Channel policies, their canonical path is
+  #   /Channel/<PolicyName>
+  Policies:
+    # Who may invoke the 'Deliver' API
+    Readers:
+      Type: ImplicitMeta
+      Rule: "ANY Readers"
+    # Who may invoke the 'Broadcast' API
+    Writers:
+      Type: ImplicitMeta
+      Rule: "ANY Writers"
+    # By default, who may modify elements at this config level
+    Admins:
+      Type: ImplicitMeta
+      Rule: "MAJORITY Admins"
+
+  # Capabilities describes the channel level capabilities, see the
+  # dedicated Capabilities section elsewhere in this file for a full
+  # description
+  Capabilities:
+    <<: *ChannelCapabilities
+
+################################################################################
+#
+#   Profile
+#
+#   - Different configuration profiles may be encoded here to be specified
+#   as parameters to the configtxgen tool
+#
+################################################################################
+Profiles:
+  ChannelUsingBFT:
+    <<: *ChannelDefaults
+    Orderer:
+      <<: *OrdererDefaults
+      Organizations:
+        - *OrdererOrg
+      Capabilities: *OrdererCapabilities
+      OrdererType: BFT
+      SmartBFT:
+        RequestBatchMaxCount: 100
+        RequestBatchMaxInterval: 50ms
+        RequestForwardTimeout: 2s
+        RequestComplainTimeout: 20s
+        RequestAutoRemoveTimeout: 3m0s
+        ViewChangeResendInterval: 5s
+        ViewChangeTimeout: 20s
+        LeaderHeartbeatTimeout: 1m0s
+        CollectTimeout: 1s
+        RequestBatchMaxBytes: 10485760
+        IncomingMessageBufferSize: 200
+        RequestPoolSize: 100000
+        LeaderHeartbeatCount: 10
+      ConsenterMapping:
+        - ID: 1
+          Host: org0-orderer1
+          Port: 6050
+          MSPID: OrdererMSP
+          Identity: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer1/cert.pem
+          ClientTLSCert: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer1/tls/signcerts/tls-cert.pem
+          ServerTLSCert: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer1/tls/signcerts/tls-cert.pem
+        - ID: 2
+          Host: org0-orderer2
+          Port: 6050
+          MSPID: OrdererMSP
+          Identity: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer2/cert.pem
+          ClientTLSCert: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer2/tls/signcerts/tls-cert.pem
+          ServerTLSCert: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer2/tls/signcerts/tls-cert.pem
+        - ID: 3
+          Host: org0-orderer3
+          Port: 6050
+          MSPID: OrdererMSP
+          Identity: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer3/cert.pem
+          ClientTLSCert: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer3/tls/signcerts/tls-cert.pem
+          ServerTLSCert: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer3/tls/signcerts/tls-cert.pem
+        - ID: 4
+          Host: org0-orderer4
+          Port: 6050
+          MSPID: OrdererMSP
+          Identity: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer4/cert.pem
+          ClientTLSCert: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer4/tls/signcerts/tls-cert.pem
+          ServerTLSCert: ./channel-msp/ordererOrganizations/org0/orderers/org0-orderer4/tls/signcerts/tls-cert.pem
+    Application:
+      <<: *ApplicationDefaults
+      Organizations:
+        - *Org1
+        - *Org2
+      Capabilities: *ApplicationCapabilities

test-network-k8s/config/org0/configtx-template.yaml

@@ -169,7 +169,7 @@ Capabilities:
     # not able to participate in channels at v2.0 application capability.
     # Prior to enabling V2.0 application capabilities, ensure that all
     # peers on channel are at v2.0.0 or later.
-    V2_0: true
+    V2_5: true
 
 ################################################################################
 #