-
-
Notifications
You must be signed in to change notification settings - Fork 743
Tutorial for ShadowRocket app
This application is one of the non-free programs on the iOS operating system that you can use to connect to VPNs based on Xray.
To do this, enter your user panel in the panel and enter the section specified for the ShadowRocket
app in the iOS
tab.
- Then, you can download the program from the given link if needed.
- In the lower section, there are configs, which have two possibilities.
There are two options. You can choose the Normal
config marked in orange or use the Lite
config the green one. Lite
config do not pass the traffic of domestic sites through the VPN, so when your VPN is active, you do not need to turn it off to go to domestic sites. On the other hand, the Normal
configuration passes all the traffic through the VPN and. If the option to block domestic sites is enabled in the panel settings, these sites will not be opened, but if WARP is enabled, domestic sites will be opened using WARP.
Finally, according to your need, click on one of the links and to transfer the link to the app, either you can use the copy option or scan the displayed QR code.
- After copying the link from the panel's user page, enter the ShadoRocket program and press the
+
button from the upper right corner.
- Then, on the page that opens, set the
Type
toSubscribe
, and then copy the link in theURL
field and clickSave
. By saving this link, all connections will be loaded in the program.
- To do this, click on the scanner button on the main page as shown below.
- Then scan the QR Code on the user page. Connections will be added to the app.
To test connections, just click on Connectivity Test on the main page of the program.
If you want to test the configurations more realistically, go to Settings
in the lower menus and then set Test Method
to Connect
. Now, if you take a test, more real results will be shown.
If you want to test the configurations more realistically, go to Settings in the lower menus and then set Test Method to Connect. Now, if you take a test, more real results will be shown.
In the Settings
menu, select the Subscribe
option at the bottom.
For this, select Update
on Open in Subscribe
.
Turn on the Auto Background Update
option to automatically update the links at specified time intervals.
If you want to sort the configurations based on the result of the ping test, select the Sort by ping
option.
To do this, activate the Disable STUN
option in Settings
and in the UDP
section.
Sometimes it may have happened to you that the sound does not play in some programs like Club House. To fix this problem, you can enter TCP
from Settings
and then change your Fingerprint
.
Enter the Shortcuts
section from Settings
. Here, you can set a voice command for different applications, using that voice command, the desired function will be executed, for example, the program will be executed, and so on.
For this, enter the On Demand
section in Settings
.
By turning this option on, your VPN will always be on.
By turning on this option, when your internet is interrupted, ShadoRoket will disconnect your entire internet to prevent your original IP from being revealed.
If you enable this option, the VPN will be disconnected after the phone goes to sleep mode.
Suppose you have a device that cannot install a VPN and needs to be connected to the free Internet. For this, you can use the connection sharing option in ShadRocket. Enter the Proxy
section in the Settings
menu and select Proxy Share
. If you enable the Enable Share option, your VPN will be shared on the specified IP and port.
To use on another device that is in the same network as your phone, you can enter its proxy settings and enter the IP and port. This device will connect to the free internet without installing any VPN.
Holding your finger on the home screen and sliding down opens the app's hidden menu.
Press the +
button to create a load balance.
Give a desired name and set the Type
to load-balance
. Then, from the Policy
section, select the configurations that have better ping or even all configurations. In the Interval
section, you can specify the time between load balance connection tests. In the Timeout
section, you can also specify the length of time a connection remains disconnected and is still considered valid. But if it's the first time you set this part, you can set the timer settings to default for now. Finally, save.
Now click on the created load balancer and tap Test
. With this, the load balance test is performed and its connection is established. By turning ShadowRocket on or off, load balance is also turned on or off.
If some sites or applications do not open for you or Telegram gifs do not open, make the following settings to fix it.
-
Go to the
Settings
menu. -
Enter the
TCP
section. -
Set
TLS
toNetwork
. -
Set
Fingerprint
toSafari15_5
. -
Set
Max Read Length
to16384
. -
Then go to
Home
. -
Set
Global Routing
toProxy
.