Home Assistent (HA) Home Energy Management System (HEMS)
Huawei Solar HEMS assist you with a set of custom HA template sensors, automations and dashboards also referred to as the "Huawei Solar HEMS package".
| Dashboard: Level 1 |
|---|
 |
These custom sensors and automations calculate all the power and energy flows of your Huawei FusionSolar PV installation based on the sensors, services and information provided by Huawei Solar Integration, because this custom HA integration ONLY exposes the information and functions made available by Huawei Solar inverters directly via one of its Modbus interfaces, which is far away from enhanced requirements of an HEMS.
All custom template sensors and automations are available as HA package files or HA blueprints and all dashboards are available through HA YAML dashboards for an easy Installation. For an overview and a more detailed description of the custom sensors and automations, please refer to the Huawei Solar HEMS Wiki Pages.
| Dashboard: Level 2 |
|---|
 |
- PV Solar forecasts by the usage of Solcast integration
This custom component integrates the Solcast Hobby PV Forecast API into HA. - EPEX Spot electricity price forecasts by the usage of EPEXSpot integration
This custom component adds electricity prices from the European Power EXchange ( EPEX Spot ) into HA.
It covers Austria, Belgium, Denmark, Germany, Finland, France, Luxembourg, the Netherlands, Norway, Poland, Sweden, the United Kingdom and Switzerland at this time. - Hourly Weather forecasts
- House load and batteries SOC forecasts by the usage of the EMHASS Add-on
EMHASS (Energy Management for Home Assistant) is an optimization tool designed for residential households connected to HA.
| Dashboard: Level 3 |
|---|
 |
| Dashboard: Level 4-1 - Today & tomorrow | Dashboard: Level 4-2 - Past |
|---|---|
 |
 |
| Dashboard: Level 4-3-1 - Hourly | Dashboard: Level 4-3-2 - Daily |
|---|---|
 |
 |
| Dashboard: Level 4-3-3 - Monthly | Dashboard: Level 4-3-4 - Yearly |
|---|---|
 |
 |
For installation follow all prerequisites and installation guides strictly!
- Step by step.
The provided custom sensors are based on a setup with one Huawei Smart Energy Controller (Inverter) and multiple Huawei Smart String ESS (Batteries):
| Dashboard: Level 5 |
|---|
 |
| PV system | |
|---|---|
| PV strings - PV1: 10 x 390 Wp = 3900 Wp - PV2: 10 x 390 Wp = 3900 Wp - Full occupancy of the south/east roof 20 x Trina Vertex S TSM-390DE09.05 390 Wp = 7.8 kWp - Optimizers: No |
 |
| Improvement - Use optimizers for all modules Long String Design with Power Optimizer will increase the total number of modules per string for expanding to the opposite side of the roof. |
 |
| Inverter - Type: SUN2000-6KTL-M1 (High Current)- Firmware: V100R001C00SPC165 - MBUS Firmware: V100R001C00SPC335 - Connect to inverter: Via SUN2000-<serial_no> WiFiBatteries - Battery-1: LUNA2000-5KW-C0- Battery-2: LUNA2000-10KW-C0- Firmware : V100R002C00SPC624 |
 |
| Power meter - Type: Three phasesDongle - Type: sDongleA-05 (WiFi / Ethernet) - Connectivitiy: Ethernet- Firmware: V200R022C10SPC118 |
 |
| Power distribution | |
| Power flows |  |
| Meter cabinet - Back-up fuses - Surge protection - Residual Current Devices (RCD) - Circuit breaker - Documentation Wallbox - Wiring and fuses for future use. |
 |
 |
|
| Energy measurement | |
| Energy flows |  |
| Smart meter - HUAWEI Smart Power Sensor DTSU666-H 100A/50mA |
 |
 |
|
| Connect to inverters MBUS - Via SUN2000-<serial_no> WiFi |
 |
| Tibber Pulse -  -  |
 |
-  |
 |
| Three-phase energy meters - 3 x Shelly Pro 3EM - 120A |
 |
 |
|
| Energy management | |
| Heat Pump Smart Grid Ready controller - 2 x Shelly Plus 1 SG-Ready Heat Pump Lock switch (HP Terminal 1) SG-Ready PV Excess switch (HP Terminal 2) eBUS controller - eBUS Adapter Shield v5 |
 |
| - SG-/PV-Ready Documentation |  |
- Alpha version at this stage.
- Especially the persistant template sensors and all automations should be validated by the community.
- Not for HA beginners, but hopefully our community will help ...
- In my environment Wife Acceptance Factor (WAF) is strongly increasing - Save your money to have more fun ;-)
- Save our earth and protect next generations of our children!
- Think long term and do the needful.
Already opened Discussion: Huawei Solar Discussion > Dashboard #355
- Private information is stored in secrets.yaml (not uploaded).
Q: What are the minimum hardware requirements for the Home Assistant (HA) server in relation to HEMS features?
A: I started my HEMS development journey on a Raspberry Pi 4b with 8GB RAM. This hardware level is sufficient for testing purposes. For production, it is highly recommended to upgrade your HA to a Mini PC server.
Q: I don't use Tibber. Can I use the other HEMS functions?
A: Yes you can. Simply comment out Tibber related entries in
<config>/configuration.yamland in<config>/dashboards/420-pv/index.yamlthe line- !include /config/dashboards/420-pv/views/424-pv.yaml.