Skip to content

Commit

Permalink
add target race v1
Browse files Browse the repository at this point in the history
  • Loading branch information
ligenxxxx committed Dec 28, 2023
1 parent 8f81496 commit f7d007f
Showing 1 changed file with 52 additions and 3 deletions.
55 changes: 52 additions & 3 deletions docs/vtx_targets.md
Original file line number Diff line number Diff line change
@@ -103,7 +103,7 @@ This VTX includes M3/M2 gummies for soft mounting, and zip ties for antenna rete

<img src="https://raw.githubusercontent.com/ligenxxxx/hdzero-vtx-docs/main/site/img/HDZero_WhoopLite_intro.png" style="width:100">

| No. | Function |
| No. | Description |
| :-: | :------------------------ |
| 1 | MIPI Connector |
| 2 | Status LEDs |
@@ -127,9 +127,58 @@ Solder pad:
- Read first: **General Consideration for VTX installation**
- This VTX does not support using keypad to tune channel and RF output power level. Ir is designed to work with flight controller.

### Race V1
### HDZero Race V1 Video Transmitter(EOL)

...
The HDZero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz.

The power input range is 7V – 17V (2S – 4S).

<img src="https://raw.githubusercontent.com/ligenxxxx/hdzero-vtx-docs/main/site/img/HDZero_RaceV1_intro_1.png" style="width:100">

| No. | Description |
| :-: | ---------------------------------------------------------- |
| 1 | Power/UART Connector |
| 2 | FW Update Connector |
| 3 | MIPI Connector |
| 4 | u.FL Antenna Connector |
| 5 | u.FL Antenna Retention Holes |
| 6 | Power on LED(red) |
| 7 | Status LED(blue) |
| 8 | Mounting Holes (20x20 M4) |
| 9 | Zip Ties (4x) |
| 10 | u.FL Antenna Retention<br />Scews(4x)/Nut(4x)/Plate |
| 11 | Rubber Grommet(M4 to M3 4x) |
| 12 | Power/UART harness (20cm)<br />and a PH2.0 connector (6P) |

<img src="https://raw.githubusercontent.com/ligenxxxx/hdzero-vtx-docs/main/site/img/HDZero_RaceV1_intro_2.png" style="width:100">

| Power/UART Connector | Cable Color | Connected with |
| :------------------- | ----------- | -------------- |
| Ground | Black | Ground |
| Power | Red | Power |
| T1 | Green | FC.RX |
| R1 | Yellow | FC.TX |
| T2 | White | DO NOT CONNECT |
| R2/SA, Optional | Gray | FC.SA(TX) |

#### Connection between Race V1 VTX and FC

There are 3 methods to connect the VTX and flight controller:

- Plug the included harness, cut the cables to appropriate length, and solder them on FC
- Use solder pads on the back of the connector
- For FCs having BEC and UART connector, install harness to the included PH2.0 connector (Shown above), and connect the harness with FC without any soldering.

**Warning: Check that pinout matches the FC pinout before installing to be safe if plugging directly.**

#### Mounting an u.FL antenna or pigtail

<img src="https://raw.githubusercontent.com/ligenxxxx/hdzero-vtx-docs/main/site/img/HDZero_RaceV1_intro_3.png" style="width:100">

There are 2 methods to mount antenna on VTX:

- Use included retention screws, nuts and plate.
- Use included zip-ties.

### Race V2

0 comments on commit f7d007f

Please sign in to comment.