This project was created for the purpose of quickly changing the IP address.
- If the input data is not correct, the commands are not executed and no change is reflected.
- The detection of the current IP address in the StatusBar is performed every 2 seconds. This means that the command will run in the background, which can lead to a decrease in performance for devices that do not have high performance.
- "Refresh NIC" it refreshes the list of network cards and saves it to the registers
- Keyboard shortcuts can be used when the window is active
- Manual IP / DHCP switching
- Quick switching between two pre-stored IP addresses and one free one
- Saving default subnet in free one
- Saved prefered NIC
- Showing currently IP Address
- Using keyboard shortcuts
- IP /renew (from cmd)
| Keys | Action |
|---|---|
| Enter | Button Apply |
| F5 | Reload Application |
| ESC | Exit Application |
| NumpadDot | Send "." (For other keyboard layouts where there is a comma in this position) |
And standard Windows keyboard shortcuts using the "alt" key...
Used internal commands that are executed in the background using CMD or PowerShell
PowerShell.exe Get-NetAdapter -Name * | Get-NetIPAddress -AddressFamily IPv4 | Select-Object InterfaceAlias
cmd.exe /k ipconfig /renew
cmd.exe /k netsh interface ip set address ...
cmd.exe /k netsh interface ipv4 set dnsservers ...
cmd.exe /k netsh interface ipv4 add dnsserver ...
All data that the application uses and stores are located in the registers.
HKEY_CURRENT_USER\Software\QuickIPChanger
When I didn't know how to proceed, I got help in the Discord group, thanks to:
- nou[Splash]
- https://discord.gg/autohotkey-11599302363617
BTC
bc1q2h5ndkf9uws3p8cyrmj85ykf23wd5ahq5v0wp8
ETH (ETH Network)
0x55A50063774133eD52A0A8f9464eC69Bd7275215
ATOM
cosmos1vumvckcxezpfm8fq2ctdkhmmheuhznqdd5n9fp
ADA (ADA Network)
addr1qy7wpxnlarr7ywhsqffk9fmfdqdrh4k7n47fem9xwljvyueuuzd8l6x8uga0qqjnv2nkj6q680tda8tunnk2valycfesmcc6ur
USDT (ETH Network)
0x55A50063774133eD52A0A8f9464eC69Bd7275215