- Analog Channels 2
- Input Voltage -24v to +24v
- Input Impedance 1MOhm, 500pF (compatible with standard probes)
- Analog Bandwidth 1MHz
- Sample Rate 650 KSamples/sec per channel
- Coupling DC
- Trigger Mode: Auto, Single or None. Type: Rising Edge, Falling Edge or Both. Level: Selectable in the range [-24v,24v] with 0.1v increments. Source: Channel1/Channel2.
- Cursors
- Math FFT (linear or dB)
- Measurements Frequency, DC Mean, Vpp, Vrms, Max, Min, Duty Cycle, Rise Time, Fall Time
- Connection to PC Virtual COM Port over USB connection
This is a DSO project based on a the Tiva™ C Series TM4C1294 Connected LaunchPad dev board. The project contains:
- embedded C code for the dev board - for CodeComposer Studio
- schematics for the electronic circuits
- code for a GUI based on GTK+3.0 written in C for Windows. Can be compiled with the included VS2013 project or the included makefile to compile with gcc.