feat(a380x/fws): ECAM abnormal procedures: Iteration 2

[flogross89]

Fixes #9222
Fixes #9212
Fixes #8988

Summary of Changes

• Rework abnormal sensed procedures to allow up/down navigation and completion of not-sensed items
• Add "LAND ASAP" / "LAND ANSA" recommendation in EWD
• Add support for sensed and not-sensed conditions, including item activation/deactivation
• Add ABN non-sensed procedures
• Add support for deferred procedures
• Secondary failures
• Re-use FWC message line formatter from EWD for PFD
• Fix ECAM CP integ lighting
• Open SD page for currently active abnormal procedure
• Enable de-selection of STS page
• Implement behavior for turnarounds and resets (depending on feat(a380x/fws): Automatic normal checklist reset #9614 )
• FWS failure + failure indications (WD NOT AVAIL etc.)
• FWS fault, FWS audio function fault from EFB, WD fallback procedure
• Add ,[] to ECAM font (no references available)
• Reminder: Consolidate reset panel XML with feat(a380x/fms): FMC reset through overhead reset panel #9685 after merge

Out of scope:

• Time limited failures
• RCL (only RCL LAST is functional)
• Proper STS page (wait for SD port)
• Limitations on SD page (wait for SD port)
• "DEACTIVATE" button on non sensed abnormal procedures: De-select ACTIVATE instead

Screenshots (if necessary)

https://streamable.com/oses9h

References

Checked by A380 TR pilot for plausibility

Additional context

Discord username (if different from GitHub):

Testing instructions

1. Verify that normal checklists still work as expected
2. Select and de-select STS page, verify it works via the SD
3. Activate ABN non-sensed procedure (only SMOKE/FUMES implement atm); Go through procedure as intended
4. Trigger simple failure of your choosing through the EFB, make sure corresponding fault is implemented (ask in Discord if unsure)
5. Trigger complex failure of your choosing through the EFB, for example hydraulic failures
6. For all procedures, navigation (up/down), check and clear buttons should work as intended
7. For some faults, deferred procedures are going to be added. Access them through the C/L menu, activate them and complete them as intended. The menu title should be amber for non-completed deferred procedures, white for completed ones.
8. Trigger FWS 1 fault via EFB, ECAM should continue to work. Trigger FWS 1+2 fault via EFB, ECAM should stop working, the EWD should display the above fallback screen (... MONITOR), and the PFD should display MEMO and LIMITATIONS NOT AVAIL
9. This is a very complex PR, so there will be a lot of test cases which I can't type out here, feel free to experiment

How to download the PR for QA

Every new commit to this PR will cause new A32NX and A380X artifacts to be created, built, and uploaded.

1. Make sure you are signed in to GitHub
2. Click on the Checks tab on the PR
3. On the left side, find and click on the PR Build tab
4. Click on either flybywire-aircraft-a320-neo, flybywire-aircraft-a380-842 (4K) or flybywire-aircraft-a380-842 (8K) download link at the bottom of the page

[BravoMike99]

Dev team QA report

Discord Username : bruno_pt99
Object of testing : #9638
Aircraft : A380X
Tier of Testing : 1
Date : 05/02/2025

Testing Process:
Quick pattern around LPBJ with the following:
Checked Normal checklists work as they should ✔️
Checked that SD page selection and deselection is possible ✔️
FWS 1 fault triggers FWS FWS1 FAULT on ECAM and FWS 2 the same but for FWS 2. With both FWS failed, the fallback message appears, SD is not available nor are limitations. Audio such as RA callouts, CRC etc are not available ✔️
With double FWS audio failure, the audio function of the FWS is lost ✔️
With ECP failure, keys such as TO CONF, RCL LAST, System page keys are not available ✔️
Activated abnormal non sensed procedure of smoke & fumes. Verified it is possible to go through the procedure and to deactivate it by selecting activate again ✔️
Activated triple FMC failure and verified it is possible to check non sensed items, in addition, once the ecam is cleared the STS page appears & the deferred procedure menu.
When selecting flap lever to 0 or switching from STD to altimeter setting, the Checklist menu appears provided there are active deffered procedures ✔️
Turned off all engine pumps of the G hydraulic system. Secondary failures were visible on the ECAM and a new deferred procedure was added ✔️
Checked it is possible to complete, clear & recall the deferred procedures ✔️
When the FWS CBs are pulled/total FWS failure, the abnormal non sensed procedures are deactivated and previously completed non sensed items of abnormal sensed procedures are cleared alongside all the normal checklists ✔️
With a failure pending and the checklist menu open, the "FAILURE PENDING" appears on EWD ✔️

Testing Results:
Passed

Media: