DEPRECATED THIS IS NOW BUILT INTO HOME ASSISTANT!!!

There will be no further updates to this card. If you have it installed make sure to remove it and the zha_map custom component when updating to HA 1.0.0

zha-network-visualization-card

Lovelace custom element for visualizing the ZHA Zigbee network

Requires that you are already using the ZHA integration commponent in Home Assistant.

This card can help you identify weak points like bad links between your devices.

Installation Instructions

1. Put the zha-network-visualization-card.js lovelace card into the \[config\]/www/zha-network-visualization-card directory ether by copying it there or by using the file editor to create it with a cut and paste of the content.
2. Add the lovelace resource with Configuration ¦ Lovelace Dashboards ¦ Resources ¦ ⊕ ¦ /local/zha-network-visualization-card/zha-network-visualization-card.js & Resource Type JavaScript Module ¦ Click Update.
3. Add custom card (works best in panel mode) through Overview ¦ ⋮ ¦ Edit Dashboard ¦ Add Card + ¦ Choose Manual A a card configuration window will open. This is where you will add type: 'custom:zha-network-visualization-card' ¦ Click Save to exit UI configurator

The new map card should appear in the Main Overview window.

Usage

The Zigbee coordinator will be represented by a rectangle at the top. Any device that serves as Zigbee router (usually all devices running on Mains electricity / grid power) will represented as ovals, and Zigbee end-device (usually battery powered sensors) will be represented by as circles.

The lines between those representions show all the possible paths through Zigbee mesh. Any path with a LQI over 192 is shown as green, LQI 129-192 is shown as yellow, and anything 128 and lower is shown as red.