Add new configuration for src15

[nikoliclisa]

New Prod config

Self check-list:

• I have checked the lstchain config, in particular for:
  • az_tel instead of sin_az_tel if data to be analyzed have been produced with lstchain <= v0.9.7
  • "increase_nsb" and "increase_psf" are provided in "image_modifier" (if used)
• I have checked the environment in the lstmcpipe config and it is the one used to analyse DL>1 data
• I have provided the command (in README), or script (in additionnal .py file) used to produce the lstmcpipe config

Prod_ID

Short description of the config

Why this config is needed

[nikoliclisa]

Hi @vuillaut
Is there anything else that should be provided for the production?

[vuillaut]

Hi @nikoliclisa
Sorry for the delay.
Thank you for the well documented readme.
The lstchain config should include the image_modifier config you produced.

[vuillaut]

To not add any further delay, I have fixed the lstchain config and will start the production.

[vuillaut]

@nikoliclisa
This configuration cannot work, it starts from a source prod 20240917_v0.10.12_src15_dec_min_2924_tuned that does not exist (it's yours).
You must start from an existing prod. In this case, the most recent base one is 20240131_allsky_v0.10.5_all_dec_base.
Please reproduce the config (you will need to pull the changes I made to lstchain config to be able to push again on that branch).