Remove deploy key usage and instead use temporary SSH key

.github/workflows/build.yaml

@@ -34,26 +34,6 @@ jobs:
         pip install -r test_requirements.txt
     - name: Pre-commit checks
       run: pre-commit run --all-files
-    - name: Write SSH keys
-      env:
-        # These were generated with:
-        # ssh-keygen -t ecdsa -m PEM ''
-        # and then installed as a read-only deploy key on the buildrunner repository
-        #
-        # Since this is a public repository and the key provides the same rights that even anonymous users have,
-        # this key is rather worthless and can be stored safely in code here. This *could* be used as a secret,
-        # but since secrets are not available to forks, we cannot test SSH functionality in PRs which defeats
-        # the purpose somewhat.
-        #
-        # Please note that for the SSH unit tests to pass on a local machine, the private key needs to be placed in ~/.ssh/buildrunner-deploy-id_rsa
-        DEPLOY_SSH_KEY: "-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBasvUoRzAAdHZ5nFWtDR/5DQU+FWtDYNXD0xPGSdjKtwAAAJiLXobki16G\n5AAAAAtzc2gtZWQyNTUxOQAAACBasvUoRzAAdHZ5nFWtDR/5DQU+FWtDYNXD0xPGSdjKtw\nAAAEBcRwB1PEnUHF5aK6q3JYyuOlT+adQ0mcRrIxsmJiiq1Vqy9ShHMAB0dnmcVa0NH/kN\nBT4Va0Ng1cPTE8ZJ2Mq3AAAAEWJ1aWxkcnVubmVyQGFkb2JlAQIDBA==\n-----END OPENSSH PRIVATE KEY-----"
-        DEPLOY_SSH_KEY_PUB: "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFqy9ShHMAB0dnmcVa0NH/kNBT4Va0Ng1cPTE8ZJ2Mq3 buildrunner@adobe"
-      run: |
-        mkdir -p ~/.ssh
-        printf -- "$DEPLOY_SSH_KEY" > ~/.ssh/buildrunner-deploy-id_rsa
-        printf -- "$DEPLOY_SSH_KEY_PUB" > ~/.ssh/buildrunner-deploy-id_rsa.pub
-        chmod 700 ~/.ssh
-        chmod 600 ~/.ssh/buildrunner-deploy-*
     - name: Test with pytest
       run: |
         pytest -v -m "not serial" --numprocesses=auto --junitxml=test-reports/non-serial-test-results.xml

tests/config-files/dot-buildrunner.yaml

@@ -11,9 +11,10 @@ ssh-keys:
   aliases:
   - 'adobe-github'
   - 'adobe-dma'
-- file: ~/.ssh/buildrunner-deploy-id_rsa
+# This should match what is in the test_buildrunner_files.py file and is generated before the tests are run
+- file: /tmp/buildrunner-test-id_rsa
   aliases:
-  - 'buildrunner-deploy'
+  - 'buildrunner-test-ssh'
 
 local-files:
   tests: ./tests

tests/test-files/test-ssh-buildx.yaml

@@ -1,5 +1,3 @@
-# Please note that for the SSH unit tests to pass on a local machine, the private key needs to be placed in ~/.ssh/buildrunner-deploy-id_rsa
-# Look in the .github/workflows/build.yaml file for the SSH private key
 use-legacy-builder: False
 steps:
   clone:
@@ -8,12 +6,20 @@ steps:
         FROM {{ DOCKER_REGISTRY }}/rockylinux:8.5
         RUN yum install -y git-core openssh-clients && yum clean all
     run:
-      ssh-keys: ['buildrunner-deploy']
+      # This key is generated automatically by the test runner
+      ssh-keys: ['buildrunner-test-ssh']
+      services:
+        ssh-service:
+          image: {{ DOCKER_REGISTRY }}/linuxserver/openssh-server:latest
+          wait_for:
+          - 2222
+          env:
+            # This is set in the test_buildrunner_files.py file
+            PUBLIC_KEY: "{{ BUILDRUNNER_TEST_SSH_PUB_KEY }}"
+            LOG_STDOUT: "true"
       cmds:
       - mkdir ~/.ssh
-      - ssh-keyscan github.com > ~/.ssh/known_hosts
+      - ssh-keyscan -p 2222 ssh-service > ~/.ssh/known_hosts
       - chmod 700 ~/.ssh
       - chmod 600 ~/.ssh/known_hosts
-      # Clone into temp directory since the "buildrunner" directory may already exist
-      - rm -rf /tmp/test-clone
-      - git clone [email protected]:adobe/buildrunner.git /tmp/test-clone
+      - if [ "$(ssh -p 2222 linuxserver.io@ssh-service 'whoami')" != "linuxserver.io" ]; then exit 1; fi

tests/test-files/test-ssh.yaml

@@ -1,18 +1,24 @@
-# Please note that for the SSH unit tests to pass on a local machine, the private key needs to be placed in ~/.ssh/buildrunner-deploy-id_rsa.
-# Look in the .github/workflows/build.yaml file for the SSH private key.
 steps:
-  clone:
+  ssh-test:
     build:
       dockerfile: |
         FROM {{ DOCKER_REGISTRY }}/rockylinux:8.5
         RUN yum install -y git-core openssh-clients && yum clean all
     run:
-      ssh-keys: ['buildrunner-deploy']
+      # This key is generated automatically by the test runner
+      ssh-keys: ['buildrunner-test-ssh']
+      services:
+        ssh-service:
+          image: {{ DOCKER_REGISTRY }}/linuxserver/openssh-server:latest
+          wait_for:
+          - 2222
+          env:
+            # This is set in the test_buildrunner_files.py file
+            PUBLIC_KEY: "{{ BUILDRUNNER_TEST_SSH_PUB_KEY }}"
+            LOG_STDOUT: "true"
       cmds:
       - mkdir ~/.ssh
-      - ssh-keyscan github.com > ~/.ssh/known_hosts
+      - ssh-keyscan -p 2222 ssh-service > ~/.ssh/known_hosts
       - chmod 700 ~/.ssh
       - chmod 600 ~/.ssh/known_hosts
-      # Clone into temp directory since the "buildrunner" directory may already exist
-      - rm -rf /tmp/test-clone
-      - git clone [email protected]:adobe/buildrunner.git /tmp/test-clone
+      - if [ "$(ssh -p 2222 linuxserver.io@ssh-service 'whoami')" != "linuxserver.io" ]; then exit 1; fi

tests/test_buildrunner_files.py

@@ -1,11 +1,16 @@
 import os
 import pytest
 import platform
+import subprocess
 import tempfile
+from pathlib import Path
 from typing import List, Optional, Tuple
 
 from tests import test_runner
 
+# This should match what is in the dot-buildrunner.yaml file
+TEST_SSH_KEY_FILE = "/tmp/buildrunner-test-id_rsa"
+
 test_dir_path = os.path.realpath(os.path.dirname(__file__))
 TEST_DIR = os.path.dirname(__file__)
 top_dir_path = os.path.realpath(os.path.dirname(test_dir_path))
@@ -18,6 +23,34 @@
 ]
 
 
+@pytest.fixture(autouse=True, scope="session")
+def setup_buildrunner_test_ssh_key():
+    key_file_path = Path(TEST_SSH_KEY_FILE)
+    key_file_path.unlink(missing_ok=True)
+    subprocess.run(
+        [
+            "ssh-keygen",
+            "-t",
+            "ecdsa",
+            "-m",
+            "PEM",
+            "-N",
+            "",
+            "-f",
+            TEST_SSH_KEY_FILE,
+        ],
+        check=True,
+    )
+    # Set the public key in an environment variable to use in the test buildrunner files
+    os.environ["BUILDRUNNER_TEST_SSH_PUB_KEY"] = (
+        Path(f"{TEST_SSH_KEY_FILE}.pub").read_text().strip()
+    )
+    yield
+    # Cleanup
+    del os.environ["BUILDRUNNER_TEST_SSH_PUB_KEY"]
+    key_file_path.unlink()
+
+
 def _get_test_args(file_name: str) -> Optional[List[str]]:
     if file_name == "test-timeout.yaml":
         # Set a short timeout here for the timeout test