VPS-LNbits with WireGuard VPN

An alternative Documentation to setup LNbits on a VPS, connected to your Lightning Network Node through a secured tunnel

This is a simpler fork / alternative to my Guide provided here, but instead of OpenVPN, we're using WireGuard here. The Problem statement remains the same, you may prefer one solution over the other. Have a read through both and see what fits better. But in either case, you're coming here for the following reasons:

have a dynamic IP from your Internet Service Provider
want to hide your home IP from the world, for whatever reason
desire to decrease your Lightning Node HTLC Routing times, so instead of running Tor only, you want Clearnet availability, too
want others to leverage the LN Services you want to offer, via LNBits, BTCPay or others
get a domain-name or use a free-domain host such as DuckDNS to point to your LNBits instance
are just curious and want to tinker around a bit, because it's good to have those skills when demand for experience continues to rise

Table of Content

Pre-Amble
Pre-Reads
Pre-Requisites
Preperations
Let's get started (LFG!)
Into the Tunnel
- LND Node: Install and test the VPN Tunnel
- LND Node: LND adjustments to listen and channel via VPS VPN Tunnel
Connect VPS LNBits to your LND Node
Appendix & FAQ

Pre-Amble

Objective

Your LNbits instance installed on a cheap, but anonymous Virtual Private Server (VPS), connected to your own, non-custodial Lightning-Network Node running on both Tor and Clearnet (Hybrid-Mode).

Challenge

We want payment options with ₿itcoin to be fast, reliable, non-custodial - but the service should ideally not be easily to be identifiable. LNBits provides a quick and simple setup today, for instance on your Raspiblitz oder Umbrel, however, if you want to build the setup from scratch on your own, you have to bypass a number of technical discovery and hurdles.

Proposed Solution

There are plenty of ways how to solve for this. This creates hesitance to implement, especially when you're not very technical. This guide is supposed to provide one approach, whilst there remain many other ways to Rome. Take your time following this through. It might take you 1-2hrs, depending highly on your skill. So don't go in here in a rush.

Pre-Reads

This guide heavily relies on the intelligence and documentation of others 🙏, but putting those together to one picture creates the last 10% hurdle which is sometimes the highest. Have a careful read through the following articles, to get a deeper understanding on some of the lighter references we'll be using further below

Pre-Requisites

running lnd-0.14.2-beta or later. This can either be a pre-0.5 Umbrel, Raspiblitz, MyNode or even a bare RaspiBolt
Technical curiosity and not too shy to use the command-line
A domain name or a subdomain registered at DuckDNS
An SSH connection to your node, and to the VPS as well. On Windows, use something like putty and get putty-gen, too
VPS Account at DigitalOcean or any alternative VPS Solution out there offering similar capabilities (it's critical they offer a public IP for you)

Disclaimer: this is a ref link, gets you $100 in credit over 60 days, while the cheapest option we use here comes at a cost of $5/month.

Preperations

The better we prepare, the more we can deal with blindspots and the unexpected.

Make notes

It's generally advised to document your own steps. Make a bucket-list of things you've done, and a ToDo to go through in case your environment changes. Imagine yourself 18 months from now, you want to setup this new hardware-node: Will you remember all the steps or extra corners you've taken? Suggested Laundry-List, you can tick them off while you go through this guide

IP-Adresses of VPS external, VPS Tunnel, Node Tunnel
Ports which needs forwarding
ToDos
Questions / open items

Visualize

Some of us are visual people. Draw your diagram to get an idea how you want things to flow

Secure

It goes without saying, but this guide doesn't go into the necessary security steps in detail, and can't take on liability for any things breaking or losing funds. Ensure you don't get reckless, start with small funds you're ok to lose. Keep an eye on developments or in touch with the active Telegram Groups, to get news and updates with low delays. Also, would recommend to do those steps with a peer, so you follow a second pair of eye review. Lastly, 2fa / yubikeys are your friends!

Let's get started (LFG!)

Well, let's get into it, shall we?!

Lightning Node

We will consider you have your Lightning Node up and running, connected via Tor and some funds on it. You also have SSH access to it and administrative privileges.

VPS: Setup

In case you don't have a VPS provider already, sign-up with my referal or pick another which provides you with a static IP and cheap costs. Maybe you even prefer one payable with Lightning ⚡. In case you go for DigitalOcean, here are the steps to create a Droplet, shouldn't take longer than a few minutes:

add a new Droplet on the left hand navigation
chose an OS of your preference, I have Ubuntu 20.04 (LTS) x64
take the Basic Plan with a shared CPU, that's enough power. You can upgrade anytime if necessary
Switch the CPU option to "Regular Intel with SSD", which should get you down to $5/month
You don't need an extra volume, but pick a datacenter region of your liking
Authentication: Chose the SSH keys option and follow the next steps to add your public keys in here for secure access. For Windows, with putty and putty-gen referenced above, you should be relatively quick to use those keys instead of a password. For Linux users, you probably know your ways already.
Add backups (costs), Monitoring or IPv6 if you wish to, however this guide won't use any of those items
Lastly, chose a tacky hostname, something which resonates with you, eg myLNBits-VPS

After a few magic cloud things happening, you have your Droplet initiated and it provides you with a public IPv4 Adress. Add it to your notes! In this guide, I'll refer to it as VPS Public IP: 207.154.241.101

VPS: Connect to your VPS and tighten it up

Connect to your VPS via SSH [email protected] and you will be welcomed on your new, remote server. Next steps are critical to do right away, harden your setup:

Update your packages: apt-get update and apt-get upgrade
Add a new Sudo User
Enable Uncomplicated Firewall (UFW) and add ports to be allowed to connected to:

$ apt install ufw
$ ufw default deny incoming
$ ufw default allow outgoing
$ ufw allow OpenSSH
$ ufw allow 80 comment 'Standard Webserver'
$ ufw allow 443 comment 'SSL Webserver'
$ ufw allow 9735 comment 'LND Main Node 1'
$ ufw enable

Follow further hardening steps, especially step 2) and 3) in the link, to set up non-root users for additional security enhancements. We consider in this guide you have added a user "admin" with sudo rights from this step forward.
Install fail2ban to protect your SSH user, it runs automatically on it's own sudo apt install fail2ban

VPS: Install Wireguard

We basically follow the guide Digital Ocean provides here. Read the full article and follow the steps for fully detailed context on commands listed below. We'll also skip IPv6 for now, as it'll make things unneccessarily complex to follow

sudo apt update && sudo apt install wireguard # install WG
wg genkey | sudo tee /etc/wireguard/private.key # create private key
sudo chmod go= /etc/wireguard/private.key # change permissions of private key to this user only, otherwise it won't work
sudo cat /etc/wireguard/private.key | wg pubkey | sudo tee /etc/wireguard/public.key # create public-key from your private one. Remember the location or make a node of it now, we'll need it soon
choose an IP range which isn't used in your network now. We'll pick 10.8.0.0 to 10.255.255.255 (10/8 prefix), and dedicate 10.8.0.1 to the VPS, and 10.8.0.2 to your node later
edit your VPS WG configuration: sudo nano /etc/wireguard/wg0.conf and ensure you add your previously generated privkey from cat /etc/wireguard/private.key into the configuration file below:

[Interface]
PrivateKey = ***base64_encoded_private_key_goes_here***
Address = 10.8.0.1/24
ListenPort = 51820
SaveConfig = true

CTRL+X, then Y and Enter to save your settings.
You want to forward all traffic, so edit your sysctl with sudo nano /etc/sysctl.conf and add / uncomment net.ipv4.ip_forward=1, then save your changes and refresh it with sudo sysctl -p.

VPS: Firewall

To activate packet forwarding, we need to add the first set of rules to the WireGuard configuration file. This will ensure that packages from your node get forwarded to the dev (device) which your VPS provider reserved for the internet connection.

identify this device with ip route list default, which should show you something like eth0, enps just before the protocol.
Make a note of this device, it's your link to the internet, and substitute it in the code below if necessary.
Copy this code below at the bottom of the file after the SaveConfig = true line: sudo nano /etc/wireguard/wg0.conf

PostUp = ufw route allow in on wg0 out on eth0
PostUp = iptables -t nat -I POSTROUTING -o eth0 -j MASQUERADE
PreDown = ufw route delete allow in on wg0 out on eth0
PreDown = iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE

Save your changes again with CTRL+X, then Y and Enter

VPS: LND and LNBits Port-Forwarding

Following the above section about packets going out, we want to ensure LND and LNBits packets coming into your VPS will get forwarded to your node. We do this step now already, even though the Node isn't connected to the tunnel yet. The following pre-requisite is important to check, in case your system is different, please alter the LND port accordingly:

Assumption: your current LND Node configuration is listening on port 9735, which you can verify by looking into your cat ~/.lnd/lnd.conf => [Application Options] => listen=0.0.0.0:9735 or just do a cat .lnd/lnd.conf | grep restlisten
add the following forwarding and routing rules to your iptables

sudo iptables -P FORWARD DROP
sudo iptables -A FORWARD -i eth0 -o wg0 -p tcp --syn --dport 9735 -m conntrack --ctstate NEW -j ACCEPT
sudo iptables -A FORWARD -i eth0 -o wg0 -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
sudo iptables -A FORWARD -i wg0 -o eth0 -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
sudo iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 9735 -j DNAT --to-destination 10.8.0.2
sudo iptables -t nat -A POSTROUTING -o wg0 -p tcp --dport 9735 -d 10.8.0.2 -j SNAT --to-source 10.8.0.1

Now don't forget to allow SSH access and the WG UDP port: sudo ufw allow 51820/udp and sudo ufw allow OpenSSH
Second critical reminder in case you adjust ports above, or forward additional ports, ensure that your Node's firewall (nf or Iptables, ufw) accepts those incoming. Eg if your node rejects 8080 or 9736, your services connections will likely fail even though going through the tunnel
Best Practice: Only allow SSH in from your home-IP: sudo ufw allow from 185.111.222.0/24 proto tcp to any port 22 comment 'SSH from Home'. Stay connected with two terminals and try to login once you do the below, to ensure you don't lock yourself out. In case you have a dynamic IP at home, either follow this guide to use a dynamic-host and resolve it every x-minutes, or tighten your SSH differently.
Ensure to do the next step again with two terminals logged in, so you can test if your UFW setting let's you login. In case you lock yourself out, you need to reimage the machine, and we want to avoid that learning exercise.
sudo ufw disable and sudo ufw enable # Refresh uncomplicated firewall, and check the status with sudo ufw status verbose

To keep those rules active after a reboot, another little nifty toolset is necessary to install:

sudo apt install netfilter-persistent
sudo apt install iptables-persistent
sudo netfilter-persistent save
sudo systemctl enable netfilter-persistent

VPS: Start your WireGuard Server

sudo systemctl enable [email protected] # to add it as a service
sudo systemctl start [email protected] # to start the service
sudo systemctl status [email protected] # to check whether it's running fine

Your Wireguard Server is now running, which means the Internet can now connect to your VPS via ports 80, 443, 9735 (and 22 SSH from your home), and it has a closed tunnel established on port 51820. You need to doublecheck your notes with these 3 items essential for your new running frontend server.

VPS Wireguard IP: Run ip address and you typically find 3 devices listed with IPs assigned. Your lo/loopback which you can ignore, your eth0 being your link to the internet, and the new wg0 IP which we have assigned ourselves in the wg0.conf earlier
The port you have defined in your wg0.conf, 51820 if you just followed the guide above
Your Wireguard Server Public Key

VPS: Install LNBits

Next we will install LNBits on this server, since it'll allow to keep your node independent and light-weight. It also allows to change nodes swiftly in-case you need to move things. We won't install it via Docker (like Umbrel does), but do the implementation based on their Github Installation Guide. You can also follow their own, excellent video walkthrough here. Just don't use Ben's commands, since these are a little dated. Since we assume you have followed the hardening guide above to add additional users, we will now have to use sudo in our commands.

$ sudo apt update
$ sudo apt-get install git -y
$ git clone https://github.com/lnbits/lnbits-legend
$ cd lnbits-legend/ 

# for making sure python 3.9 is installed, check with python3 --version, skip this block if installed 3.9 or newer
$ sudo apt update
$ sudo apt install software-properties-common
$ sudo add-apt-repository ppa:deadsnakes/ppa
$ sudo apt install python3.9 python3.9-distutils

$ curl -sSL https://install.python-poetry.org | python3 -
$ export PATH="/home/admin/.local/bin:$PATH" # or whatever is suggested in the poetry install notes printed to terminal. this is important!
$ poetry env use python3.9 # or reference 3.10 if you have a newer version installed
$ poetry install --only main
$ poetry run python build.py

$ mkdir data && cp .env.example .env
$ poetry run lnbits --port 5000

If you run into trouble, check out the original troubleshooting hints. Now when this is successfully starting, you can abort with CTRL-C. We will come back to this for further configuration editing LNBits' config-file to our desired setup.

Into the Tunnel

We have installed the tunnel through the mountain, but need to get our LND Node to use it.

LND Node: Install and test the VPN Tunnel

Now switch to another terminal window, and SSH into your Lightning Node. We want to connect to the VPS, for that, we basically replicate the steps installing wg, creating a private and public key, and connect and establish the tunnel. Later, we will work with the assumption that your LND RestLNDWallet is listening on port 8080, check your lnd.conf again, under [Application Options] => restlisten=0.0.0.0:8080, or $ cat .lnd/lnd.conf | grep restlisten

$ sudo apt update
$ sudo apt install wireguard -y
$ sudo apt install resolvconf -y # we need that to successfully tunnel our DNS requests via the tunnel
$ wg genkey | sudo tee /etc/wireguard/private.key
$ sudo chmod go= /etc/wireguard/private.key
# make a note of your private key, and keep it secret. We'll need it for the wg0.conf on your node again
$ sudo cat /etc/wireguard/private.key | wg pubkey | sudo tee /etc/wireguard/public.key
# make a note of your public key, we will need it for the server later to allow this node to connect to it.

Now we'll create the wg0.conf on your node. The upper interface part is your node, the Peer section are the details of your VPS WG-Server. Replace the PrivateKey on Top from your node details, and add the PublicKey and the Endpoint attributes with your WG-Server you noted down earlier.

Open up the sudo nano /etc/wireguard/wg0.conf

[Interface]
PrivateKey = ***base64_encoded_peer_private_key_goes_here***
Address = 10.8.0.2/24

[Peer]
PublicKey = U9uE2kb/nrrzsEU58GD3pKFU3TLYDMCbetIsnV8eeFE=
AllowedIPs = 0.0.0.0/0
Endpoint = 207.154.241.101:51820
PersistentKeepalive = 25

Important element: Since we want to route all traffic from your node through the tunnel, the next steps are important to follow through. This ensures that you can still access your node in your LAN at home, otherwise you'd always need to connect to your VPS, to get through the tunnel back to your node. Not desirable!

Identify your node main IP gateway to the internet with ip route list table main default
Make a note of the IP, eg 203.0.113.1 and the dev, eg eth0
Now identify your node's own IP with ip -brief address show eth0, eg 203.0.113.5 (at home, it's more likely something like 192.168.1.20)
Lastly, in your other terminal window, make a note of your VPS' DNS Servers. Since your node will go through the tunnel, we want to ensure it can use the VPS for DNS resolving: resolvectl dns eth0. It'll show you one or two IPv4 IPs, use them both to be sure, eg 67.207.67.2 67.207.67.3
sudo nano /etc/wireguard/wg0.conf, and before the [Peer] line, add the following 4 lines:

PostUp = ip rule add table 200 from 203.0.113.5
PostUp = ip route add table 200 default via 203.0.113.1
PreDown = ip rule delete table 200 from 203.0.113.5
PreDown = ip route delete table 200 default via 203.0.113.1

DNS = 67.207.67.2 67.207.67.3

For the next step, let's remind ourselves about the publicKey of our node: sudo cat /etc/wireguard/public.key

With this completed, the node is ready to engage in the tunnel. But the server won't accept a connection. So let's add us to the allow-list, shall we? Open up the terminal window on your VPS, and add your node as a friendly peer.

Ensure to replace the PublicKey of your node here: sudo wg set wg0 peer NodePublicKey allowed-ips 10.8.0.2
Validate that your settings have been added successfully: sudo wg

Important Warning: Be aware that the next step basically reroutes all your node traffic going out from home through the tunnel instead, so if you're running your LND node, there might be a small down-time following. Be patient! Now comes the first test-run. 👀

sudo wg-quick up wg0 which will activate your tunnel temporarily.
sudo wg will show you the status on both the Node terminal, as well as on the VPS. Check if you have a handshake, and traffic is recorded
On your node, check if DNS resolving works with ip route get 1.1.1.1, the DNS service by Cloudflare.
To deactivate your WG-Tunnel, just call sudo wg-quick down wg0
If you like the results, you can make the WG-Tunnel permanent and activate itself automatically after a reboot, with the following two commands similar to the server setting earlier: first deactivate the current tunnel if running, with sudo wg-quick down wg0, then add it to your systemd startup-routine with sudo systemctl enable [email protected] and sudo systemctl start [email protected], and check the status with sudo systemctl status [email protected]

The tunnel between your LND Node and your VPS VPN is established. If you need to troubleshoot, call the systemctl journal via sudo wg show

LND Node: LND adjustments to listen and channel via VPS VPN Tunnel

We switch Terminal windows again, going back to your LND Node. A quick disclaimer again, since we are fortunate enough to have plenty of good LND node solutions out there, we cannot cater for every configuration out there. Feel free to leave comments or log issues if you get stuck for your node, we'll be looking at the two most different setups here. But this should work very similar on MyNode, Raspibolt or Citadel.

Be very cautious with your lnd.conf. Make a backup before with cp /mnt/hdd/lnd/lnd.conf /mnt/hdd/lnd/lnd.bak so you can revert back when things don't work out. The brackets below indicate the section where each line needs to be added to. Don't place anything anywhere else, as it will cause your LND constrain from starting properly.

Adjust ports and IPs accordingly!

Click here to expand Raspibolt settings

LND.conf adjustments, open with sudo nano /mnt/hdd/lnd/lnd.conf

[Application Options]

Command	Description
`externalip=207.154.241.101:9735`	# to add your VPS Public-IP
`nat=false`	# deactivate NAT
`tlsextraip=10.8.0.2`	# allow later LNbits-access to your rest-wallet API

[tor]

Command	Description
`tor.active=true`	# ensure Tor is active
`tor.v3=true`	# with the latest version. v2 is going to be deprecated this summer
`tor.streamisolation=false`	# this needs to be false, otherwise hybrid mode doesn't work
`tor.skip-proxy-for-clearnet-targets=true`	# activate hybrid mode

CTRL-X => Yes => Enter to save

LND Systemd Startup adjustment

Command	Description
`sudo systemctl restart lnd.service`	apply changes and restart your lnd.service. It will ask you to reload the systemd services, copy the command, and run it with sudo. This can take a while, depends how long your last restart was. Be patient.
`sudo tail -n 30 -f /mnt/hdd/lnd/logs/bitcoin/mainnet/lnd.log`	to check whether LND is restarting properly
`lncli getinfo`	to validate that your node is now online with two uris, your pub-id@VPS-IP and pub-id@Tor-onion

"03502e39bb6ebfacf4457da9ef84cf727fbfa37efc7cd255b088de426aa7ccb004@207.154.241.101:9736",
     "03502e39bb6ebfacf4457da9ef84cf727fbfa37efc7cd255b088de426aa7ccb004@vsryyejeizfx4vylexg3qvbtwlecbbtdgh6cka72gnzv5tnvshypyvqd.onion:9735"

Click here to expand Raspiblitz 1.7.x settings

LND.conf adjustments, open with sudo nano /mnt/hdd/lnd/lnd.conf

[Application Options]

Command	Description
`externalip=207.154.241.101:9735`	# to add your VPS Public-IP
`nat=false`	# deactivate NAT
`tlsextraip=10.8.0.2`	# allow later LNbits-access to your rest-wallet API

[tor]

Command	Description
`tor.active=true`	# ensure Tor is active
`tor.v3=true`	# with the latest version. v2 is going to be deprecated this summer
`tor.streamisolation=false`	# this needs to be false, otherwise hybrid mode doesn't work
`tor.skip-proxy-for-clearnet-targets=true`	# activate hybrid mode

CTRL-X => Yes => Enter to save

RASPIBLITZ CONFIG FILE sudo nano /mnt/hdd/raspiblitz.conf since Raspiblitz has some LND pre-check scripts which otherwise overwrite your settings.

Command	Description
`publicIP='207.154.241.101'`	# add your VPS Public-IP
`lndPort='9735'`	# define the LND port
`lndAddress='207.154.241.101'`	# define your LND public IP address

CTRL-X => Yes => Enter to save

LND Systemd Startup adjustment

Command	Description
`sudo systemctl restart lnd.service`	apply changes and restart your lnd.service. It will ask you to reload the systemd services, copy the command, and run it with sudo. This can take a while, depends how long your last restart was. Be patient.
`sudo tail -n 30 -f /mnt/hdd/lnd/logs/bitcoin/mainnet/lnd.log`	to check whether LND is restarting properly
`lncli getinfo`	to validate that your node is now online with two uris, your pub-id@VPS-IP and pub-id@Tor-onion

"03502e39bb6ebfacf4457da9ef84cf727fbfa37efc7cd255b088de426aa7ccb004@207.154.241.101:9736",
     "03502e39bb6ebfacf4457da9ef84cf727fbfa37efc7cd255b088de426aa7ccb004@vsryyejeizfx4vylexg3qvbtwlecbbtdgh6cka72gnzv5tnvshypyvqd.onion:9735"

Click here to expand Raspiblitz 1.8.x settings

LND.conf adjustments, open with sudo nano /mnt/hdd/lnd/lnd.conf

[Application Options]

Command	Description
`externalip=207.154.241.101:9735`	# to add your VPS Public-IP
`nat=false`	# deactivate NAT
`tlsextraip=10.8.0.2`	# allow later LNbits-access to your rest-wallet API

[tor]

Command	Description
`tor.active=true`	# ensure Tor is active
`tor.v3=true`	# with the latest version. v2 is going to be deprecated this summer
`tor.streamisolation=false`	# this needs to be false, otherwise hybrid mode doesn't work
`tor.skip-proxy-for-clearnet-targets=true`	# activate hybrid mode

CTRL-X => Yes => Enter to save

RASPIBLITZ LND-checkup FILE sudo nano /home/admin/config.scripts/lnd.check.sh since Raspiblitz has some LND pre-check scripts which otherwise overwrite your settings. Go to line 184 or search for enforce PublicIP if (if not running Tor). Uncomment those 5 lines indicated here:

#  if [ "${runBehindTor}" != "on" ]; then
#    setting ${lndConfFile} ${insertLine} "externalip" "${publicIP}:${lndPort}"
#  else
    # when running Tor a public ip can make startup problems - so remove
#    sed -i '/^externalip=*/d' ${lndConfFile}
#  fi

CTRL-X => Yes => Enter to save

LND Systemd Startup adjustment

Command	Description
`sudo systemctl restart lnd.service`	apply changes and restart your lnd.service. It will ask you to reload the systemd services, copy the command, and run it with sudo. This can take a while, depends how long your last restart was. Be patient.
`sudo tail -n 30 -f /mnt/hdd/lnd/logs/bitcoin/mainnet/lnd.log`	to check whether LND is restarting properly
`lncli getinfo`	to validate that your node is now online with two uris, your pub-id@VPS-IP and pub-id@Tor-onion

"03502e39bb6ebfacf4457da9ef84cf727fbfa37efc7cd255b088de426aa7ccb004@207.154.241.101:9736",
     "03502e39bb6ebfacf4457da9ef84cf727fbfa37efc7cd255b088de426aa7ccb004@vsryyejeizfx4vylexg3qvbtwlecbbtdgh6cka72gnzv5tnvshypyvqd.onion:9735"

Click here to expand Umbrel Pre-0.5 & Citadel settings

LND.conf adjustments, open with sudo nano /home/umbrel/umbrel/lnd/lnd.conf

[Application Options]

Command	Description
`externalip=207.154.241.101:9735`	# to add your VPS Public-IP
`nat=false`	# deactivate NAT
`tlsextraip=10.8.0.2`	# allow later LNbits-access to your rest-wallet API

[tor]

Command	Description
`tor.active=true`	# ensure Tor is active
`tor.v3=true`	# with the latest version. v2 is going to be deprecated this summer
`tor.streamisolation=false`	# this needs to be false, otherwise hybrid mode doesn't work
`tor.skip-proxy-for-clearnet-targets=true`	# activate hybrid mode

CTRL-X => Yes => Enter to save

LND Restart to incorporate changes to lnd.conf

Command	Description
`cd umbrel && docker-compose restart lnd`	This can take a while. Be patient.
`tail -n 30 -f ~/umbrel/lnd/logs/bitcoin/mainnet/lnd.log`	check whether LND is restarting properly
`~/umbrel/bin/lncli getinfo`	validate that your node is now online with two uris, your pub-id@VPS-IP and pub-id@Tor-onion

"03502e39bb6ebfacf4457da9ef84cf727fbfa37efc7cd255b088de426aa7ccb004@207.154.241.101:9736",
        "03502e39bb6ebfacf4457da9ef84cf727fbfa37efc7cd255b088de426aa7ccb004@vsryyejeizfx4vylexg3qvbtwlecbbtdgh6cka72gnzv5tnvshypyvqd.onion:9735"

Click here to expand Umbrel Version 0.5.x settings

LND.conf adjustments, open with sudo nano /home/umbrel/umbrel/lnd/lnd.conf

[Application Options]

Command	Description
`externalip=207.154.241.101:9735`	# to add your VPS Public-IP
`nat=false`	# deactivate NAT
`tlsextraip=10.8.0.2`	# allow later LNbits-access to your rest-wallet API

[tor]

Command	Description
`tor.active=true`	# ensure Tor is active
`tor.v3=true`	# with the latest version. v2 is going to be deprecated this summer
`tor.streamisolation=false`	# this needs to be false, otherwise hybrid mode doesn't work
`tor.skip-proxy-for-clearnet-targets=true`	# activate hybrid mode

CTRL-X => Yes => Enter to save

LND Restart to incorporate changes to lnd.conf

Command	Description
`~/umbrel/scripts/app stop lightning && ~/umbrel/scripts/app start lightning`	same applies here: Be patient.
`tail -f ~/umbrel/app-data/lightning/data/lnd/logs/bitcoin/mainnet/lnd.log`	Check the logs
`~/umbrel/scripts/app compose lightning exec lnd lncli getinfo`	Check the two Uris looking like below

"03502e39bb6ebfacf4457da9ef84cf727fbfa37efc7cd255b088de426aa7ccb004@207.154.241.101:9736",
      "03502e39bb6ebfacf4457da9ef84cf727fbfa37efc7cd255b088de426aa7ccb004@vsryyejeizfx4vylexg3qvbtwlecbbtdgh6cka72gnzv5tnvshypyvqd.onion:9735"

Connect VPS LNBits to your LND Node

The traffic line between the two connection points is established. Worth noting that this can be extended: In case you run more than one node, just repeat the steps above for additional clients. Now, let's get LNBits talk to your node.

LND Node: provide your VPS LNBits instance read / write access to your LND Wallet

Assuming LND restarted well on your LND Node, your LND is now listening and connectable via VPS Clearnet IP and Tor. That's quite an achievement already. But we want to setup LNBits as well, right? So go grab another beverage, now we'll get LNBits running. For that, let's climb another tricky obstacle; to respect the excellent security feats the LND engineering team has implemented. Since we don't want to rely on a custodial wallet provider, which would be super easy to add into LNBits, we have some more tinkering to do. Follow along to basically provide two things to your VPS from your LND Node.

Note of warning again: Both of those files are highly sensitive. Don't show them to anyone, don't transfer them via Email, just follow the secure channel below and you should be fine, as long you keep the security barriers installed in Section "Secure" intact.

your tls.cert. Be aware that this file changes only after you have added the tlsextraip settings in lnd.conf, and restarted LND. Check it's creation date with ls -la ~/.lnd/tls.cert to ensure it's quite recent. Otherwise your changes are not implemented and the certificate not valid. Only with access to this file, your VPS is going to be allowed to leverage your LND Wallet via Rest-API. Switch terminals to your VPS,

create a new folder, which we'll secure with mkdir ~/.secret
pull the file via scp [email protected]:/home/admin/.lnd/tls.cert ~/.secret to your VPS
lock it up chmod 600 ~/.secret/tls.cert

your admin.macaroon. Only with that, your VPS can send and receive payments xxd -ps -u ~/.lnd/data/chain/bitcoin/mainnet/admin.macaroon will provide you with a long, hex-encoded string. Keep that terminal window open, since we need to copy that code and use it in our next step on the VPS.

VPS: Customize and configure LNBits to connect to your LNDRestWallet

Now since we're back in the VPS terminal, keep your LND Node Terminal open. We'll adjust the LNBits environment settings, and we'll distinguish between necessary and optional adjustments. First, send the following commands to move the cert, restrict it's access, and start editing the environment settings for LNBits: nano ~/lnbits-legend/.env

Worth noting, the directory data will hold all your database SQLite3 files. So in case you consider proper backup or migration procedures, this directory is the key to be kept. For the real deal, check out this guide how to setup your LNBits with PostgreSQL, which is highly reocmmended by the LNBits Dev Team. They just migrated their SQLite db to postgres as well.

Necessary adjustments

Variable	Description
`LNBITS_DATA_FOLDER="/home/admin/lnbits-legend/data"`	enter the absolute path to the data folder you created above
`LNBITS_BACKEND_WALLET_CLASS=LndRestWallet`	Specify that we want to use our LND Node Wallet Rest-API
`LND_REST_ENDPOINT="https://10.8.0.2:8080"`	Add your `Lightning Node WG-Peer IP: 10.8.0.2` on port 8080
`LND_REST_CERT="/home/admin/.secret/tls.cert"`	Add the link to the tls.cert file copied over earlier
`LND_REST_MACAROON="HEXSTRING"`	Copy the hex-encoded snippet from your LND Node Terminal output from Section 11.2 in here

Optional adjustments

Variable	Description
`LNBITS_SITE_TITLE="HODLmeTight LNbits"`	Give your Website a tacky title
`LNBITS_SITE_TAGLINE="free and open-source lightning wallet"`	Define the sub-title in the body
`LNBITS_SITE_DESCRIPTION="Offering free and easy Lightning Bitcoin Payment options for Friends & Family"`	Outline your offering
`LNBITS_THEME_OPTIONS="classic, bitcoin, flamingo, mint, autumn, monochrome, salvador"`	Provide different color themes, or keep it simple
`CTRL-X` => `Yes` => `Enter` to save

VPS: Start LNBits and test the LND Node wallet connection

As soon you got here, we got the most complex things done 💪. The next few steps will be a walk in the park. Get another beverage, and then we will add LNBits to your systemd service to automatically start / restart it after reboots. Create a new config file with sudo nano /etc/systemd/system/lnbits.service and add the following content. Please adjust the lnbits working directory accordingly

# Systemd unit for lnbits
# /etc/systemd/system/lnbits.service

[Unit]
Description=LNbits

[Service]
# replace with the absolute path of your lnbits installation
WorkingDirectory=/home/admin/lnbits-legend
ExecStart=/home/admin/.local/bin/poetry run lnbits --port 5000
User=admin
Restart=always
TimeoutSec=120
RestartSec=30
Environment=PYTHONUNBUFFERED=1

[Install]
WantedBy=multi-user.target

Save and then enable it

sudo systemctl enable lnbits.service
sudo systemctl start lnbits.service

When this is successful, it'll report your wallet balance of your node, and you can move on. If not, a good debugging approach is to connect from the VPS to your node via curl https://10.8.0.2:8080 -v --cacert ~/admin/.secret/tls.cert.

LNBits should now be running and listening on all incoming requests on port 5000. If you're impatient, you can curl https://127.0.0.1:5000 and you should see a text-version of the LNBits UI. Note that because the way we run LNBits only locally, you can't test external access just yet. If curl doesn't provide meaningful response, check with the command netstat -tulpen | grep 5000 to see if your process listening on port 5000.

If it looks all good, we'll go to the last, final endboss.

Your domain, Webserver and SSL setup

(new version with caddy web server)

We don't want to share our IP-Adress for others to pay us, a domain name is a much better brand. And we want to keep it secure, so we need to get us an SSL certificate. Good for you, both options are available for free, just needs some further work.

Domain

While there are plenty of domain-name providers out there, we are going to use a free, easy and secure provider: duckdns.org. They do their own elevator pitch why to use them on their site. Feel free to pick another, such as Cloudflare or Ahnames, but this guide will use the former for simplicity

make an account on DuckDNS with GH or Email
add 1 of 5 free subdomains, eg. paymeinsats
point this domain to your VPS Public IP: 207.154.241.101
Make a note of your Token in case you chose nginx as webserver below

In this guide, you can chose either Caddy or Nginx as webserver install. The former is way simpler, but in case you're more familiar with Nginx, go for the latter:

🆕 VPS: Caddy web server

Click here to expand the web-server setup with Caddy as a web server

Caddy is an open source web server with automatic HTTPS certification and brings the web interface of your LNbits instance to the clearnet. It really takes care of everything very efficiently. You only have to point the DNS entry of the (sub)domain to the IP address of the VPS, and Caddy takes care of the rest.

First: Check DNS entry

Check beforehand whether the DNS entry also works and forwards the web domain directly to your VPS IP address. With DNS Lookup or whatsmydns.net.

Install Caddy

$ cd ~
$ sudo apt install -y debian-keyring debian-archive-keyring apt-transport-https
$ curl -1sLf 'https://dl.cloudsmith.io/public/caddy/stable/gpg.key' | sudo gpg --dearmor -o /usr/share/keyrings/caddy-stable-archive-keyring.gpg
$ curl -1sLf 'https://dl.cloudsmith.io/public/caddy/stable/debian.deb.txt' | sudo tee /etc/apt/sources.list.d/caddy-stable.list
$ sudo apt update
$ sudo apt install caddy

Create the Caddyfile

$ sudo caddy stop
$ sudo nano /etc/caddy/Caddyfile

Fill the file with an adjusted domain address

paymeinsats.duckdns.org {
  handle /api/v1/payments/sse* {
    reverse_proxy 0.0.0.0:5000 {
      header_up X-Forwarded-Host paymeinsats.duckdns.org
      transport http {
         keepalive off
         compression off
      }
    }
  }
  reverse_proxy 0.0.0.0:5000 {
    header_up X-Forwarded-Host paymeinsats.duckdns.org
  }
}

CTRL-X => Yes => Enter to save

Add caddy autostart service

$ sudo nano /etc/systemd/system/caddy.service

Replace content with

# caddy.service

[Unit]
Description=Caddy
Documentation=https://caddyserver.com/docs/
After=network.target network-online.target
Requires=network-online.target

[Service]
Type=notify
User=caddy
Group=caddy
ExecStart=/usr/bin/caddy run --environ --config /etc/caddy/Caddyfile
ExecReload=/usr/bin/caddy reload --config /etc/caddy/Caddyfile --force
TimeoutStopSec=5s
LimitNOFILE=1048576
LimitNPROC=512
PrivateDevices=yes
PrivateTmp=true
ProtectSystem=full
AmbientCapabilities=CAP_NET_BIND_SERVICE

[Install]
WantedBy=multi-user.target

CTRL-X => Yes => Enter to save

Enable, start and check service

$ sudo systemctl enable caddy.service
$ sudo systemctl start caddy.service
$ sudo systemctl status caddy.service

VPS: nginx web server

Click here to expand if you prefer to use nginx web-server setup, which is more complex but also battle-tested

VPS: SSL certificate

You want your secure https:// site to confirm to your visitor's browser that you're legit. For this, we will use Certbot to manage our SSL certificate management, even though LNBits recommends caddy. Use your own preference, we'll walk through certbot with wildcard here:

$ sudo snap install core; sudo snap refresh core
$ sudo snap install --classic certbot
$ sudo ln -s /snap/bin/certbot /usr/bin/certbot
$ sudo snap set certbot trust-plugin-with-root=ok
$ sudo certbot certonly --manual --preferred-challenges dns

Next to a few other things, Certbot will ask you for your domain, so add your paymeinsats.duckdns.org. Then it'll prompt you to place a TXT record for \_acme-challenge.paymeinsats.duckdns.org, which is basically their way to verify whether you really own this domain. To achieve this, leave the certbot alone without touching anything, and follow those steps in parallel:

Open a text editor, and add this URL: https://www.duckdns.org/update?domains={YOURVALUE}&token={YOURVALUE}&txt={YOURVALUE}[&verbose=true]
replace each variable ¹
- domains={YOURVALUE} with your subdomain only, in our case domains=paymeinsats
- token={YOURVALUE} with your token from your duckdns.org overview
- txt={YOURVALUE} with the random text-snippet certbot provided you to fill in
- optional: set verbose=true if you want 2 lines more info as a response
Copy that whole string into a new Webbrowser window, and if verbose isn't set as true, it'll be as crisp as OK
In a new Terminal window, install dig sudo apt-get install dnsutils to check if the world knows about you solved the challenge: dig -t txt _acme-challenge.paymeinsats.duckdns.org. Compare the TXT record entry with what Certbot provided you. If both are similar, confirm with Enter in the Certbot Terminal, so it can do it's own verification
Once successful, you got your SSL certificates. Make a note in your calendar when the validation time is over, so you renew early enough. Also take note of the absolute paths of those two certificates you received.

VPS: Webserver NGINX

Uvicorn is working fine, but we'll add a more robust solution, to be able to do some caching and better log-management: nginx (engine-x). We'll add a new configuration file for your website.

Please don't forget to adjust domain names and paths below accordingly!

sudo nano /etc/nginx/sites-available/paymeinsats.conf to create and edit your new configuration file nginx will use and add the following entries

server {
        # Binds the TCP port 80
        listen 80;
        # Defines the domain or subdomain name
        server_name paymeinsats.duckdns.org;
        # Redirect the traffic to the corresponding 
        # HTTPS server block with status code 301
        return 301 https://$host$request_uri;
       }

server {
        listen 443 ssl; # tell nginx to listen on port 443 for SSL connections
        server_name paymeinsats.duckdns.org; # tell nginx the expected domain for requests

        access_log /var/log/nginx/paymeinsats-access.log; # Your first go-to for troubleshooting
        error_log /var/log/nginx/paymeinsats-error.log; # Same as above

        location / {
                proxy_pass http://127.0.0.1:5000; # This is your uvicorn LNbits local host IP and port
                proxy_set_header Upgrade $http_upgrade;
                proxy_set_header Connection 'upgrade';
                proxy_set_header X-Forwarded-Proto https;
                proxy_set_header Host $host;
                proxy_http_version 1.1; # headers to ensure replies are coming back and forth through your domain
       }

        ssl_certificate /etc/letsencrypt/live/paymeinsats.duckdns.org/fullchain.pem; # Point to the fullchain.pem from Certbot 
        ssl_certificate_key /etc/letsencrypt/live/paymeinsats.duckdns.org/privkey.pem; # Point to the private key from Certbot
}

CTRL-X => Yes => Enter to save Next we'll test the configuration and enable it by creating a symlink from sites-available to sites-enabled.

$ sudo nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
$ sudo ln -s /etc/nginx/sites-available/paymeinsats.conf /etc/nginx/sites-enabled/
$ sudo systemctl restart nginx

Now the moment of truth: Go to your Website https://paymeinsats.duckdns.org and either celebrate 🍻 or troubleshoot where things could have gone wrong. If the former: Congratulations - you made it!

Hope you enjoyed this article. Please do share feedback and suggestions for improvement. If this guide was of any help, I'd appreciate if you share the article with others, give me a follow on X or nostr, perhaps even donating some sats to [email protected]

I'm also always grateful for incoming channels to my node: HODLmeTight

Appendix & FAQ

I see anyone can create a wallet on my LNBits service, but I don't want that. How do I change that?

Once you have created your first user wallet, and you want only this to be accessible, go to the user-section in LNBits and notice the user-ID in the URL: /usermanager/?usr=[32-digit-user-ID]. Copy the user-id and add it to your .env file: nano ~/lnbits-legend/.env and add this to the variable LNBITS_ALLOWED_USERS="". You can comma-seperate a list of user-ids.

I'm stuck and have no idea why it's not working. Who can help?

Please add an issue on Github with your question and provide as much detail as possible. Keep it safe though, no macaroon or user-ids!

So I have LNBits running, now what?

Head over to LNBits Website and check out the plethora of options you could do. For instance, I've built a donation wallet, which is shared 50:50 between the main author and my own wallet. All automated.

Why DigitalOcean - can't we pick a VPS where we can pay with Lightning, and anonymously

Consider this guide a work-in-progress. I've picked DigitalOcean since I know what I'm doing there. Heard good things about Luna Node, it's cheaper and you can pay with sats, so will test this out next. Also happy to add further alternatives, leave comments if you think these can accomplish the same results. Fee free to provide suggestions here.

Can I add more nodes connecting to the tunnel? If so, how?

In fact, I have more than one node connected to the tunnel. You need to handle your port-forwarding appropriately, since every node needs their unique LND listen port. Eg Node 1 has 9735, Node 2 9736 and so on. IPtable rules and UFW needs to be adjusted. But once you got this guide internalised, the principle should be clear. Otherwise, let me know.

Visit Specpage of duckdns.org for further details here ↩

Name		Name	Last commit message	Last commit date
Latest commit History 38 Commits
docs		docs
LICENSE		LICENSE
README.md		README.md
Wireguard VPN_LNBits.drawio		Wireguard VPN_LNBits.drawio
Wireguard VPN_LNBits.drawio.png		Wireguard VPN_LNBits.drawio.png

License

TrezorHannes/VPS-LNBits-Wireguard

Folders and files

Latest commit

History

Repository files navigation

VPS-LNbits with WireGuard VPN

Table of Content

Pre-Amble

Objective

Challenge

Proposed Solution

Pre-Reads

Pre-Requisites

Preperations

Make notes

Visualize

Secure

Let's get started (LFG!)

Lightning Node

VPS: Setup

VPS: Connect to your VPS and tighten it up

VPS: Install Wireguard

VPS: Firewall

VPS: LND and LNBits Port-Forwarding

VPS: Start your WireGuard Server

VPS: Install LNBits

Into the Tunnel

LND Node: Install and test the VPN Tunnel

LND Node: LND adjustments to listen and channel via VPS VPN Tunnel

Connect VPS LNBits to your LND Node

LND Node: provide your VPS LNBits instance read / write access to your LND Wallet

VPS: Customize and configure LNBits to connect to your LNDRestWallet

Necessary adjustments

Optional adjustments

VPS: Start LNBits and test the LND Node wallet connection

Your domain, Webserver and SSL setup

Domain

🆕 VPS: Caddy web server

First: Check DNS entry

Install Caddy

Create the Caddyfile

Fill the file with an adjusted domain address

Add caddy autostart service

Replace content with

Enable, start and check service

VPS: nginx web server

VPS: SSL certificate

VPS: Webserver NGINX

Appendix & FAQ

I see anyone can create a wallet on my LNBits service, but I don't want that. How do I change that?

I'm stuck and have no idea why it's not working. Who can help?

So I have LNBits running, now what?

Why DigitalOcean - can't we pick a VPS where we can pay with Lightning, and anonymously

Can I add more nodes connecting to the tunnel? If so, how?

Footnotes

About

Topics

Resources

License

Stars

Watchers

Forks