add sL1D descriptions

src/rocprof_compute_soc/analysis_configs/gfx906/1400_constant-cache.yaml

@@ -2,6 +2,68 @@
 # Add description/tips for each metric in this section.
 # So it could be shown in hover.
 Metric Description:
+  Speed-of-Light:
+    Bandwidth: &SoL_Bandwidth_tip >-
+      The number of bytes looked up in the sL1D cache, as a percent of the peak theoretical
+      bandwidth. Calculated as the ratio of sL1D requests over the total sL1D cycles.
+    Cache Hit Rate: &SoL_Cache_Hit_Rate_tip >-
+      The percent of sL1D requests that hit on a previously loaded line in the cache. Calculated as
+      the ratio of the number of sL1D requests that hit over the number of all sL1D requests.
+    sL1D-L2 BW: &SoL_sL1D-L2_Bandwidth_tip >-
+      The number of bytes requested by the sL1D from the L2 cache, as a percent of the peak
+      theoretical sL1D → L2 cache bandwidth.  Calculated as the ratio of the total number of
+      requests from the sL1D to the L2 cache over the total sL1D-L2 interface cycles.
+  Scalar L1D Cache Accesses:
+    Requests: &Accesses_Requests_tip >-
+      The total number of requests, of any size or type, made to the sL1D per normalization unit.
+    Hits: &Accesses_Hits_tip >-
+      The total number of sL1D requests that hit on a previously loaded cache line, per
+      normalization unit.
+    Misses - Non-Duplicated: &Accesses_Misses_Non-Duplicated_tip >-
+      The total number of sL1D requests that missed on a cache line that was not already pending due
+      to another request, per normalization unit.
+    Misses - Duplicated: &Accesses_Misses_Duplicated_tip >-
+      The total number of sL1D requests that missed on a cache line that was already pending due to
+      another request, per normalization unit.
+    Cache Hit Rate: &Accesses_Cache_Hit_Rate_tip >-
+      Indicates the percent of sL1D requests that hit on a previously loaded line the cache. The
+      ratio of the number of sL1D requests that hit over the number of all sL1D requests.
+    Read Requests (Total): &Accesses_Read_Requests_(Total)_tip >-
+      The total number of sL1D read requests of any size, per normalization unit.
+    Atomic Requests: &Accesses_Atomic_Requests_tip >-
+      The total number of sL1D atomic requests of any size, per normalization unit. Typically unused
+      on CDNA accelerators.
+    Read Requests (1 DWord): &Accesses_Read_Requests_(1_DWord)_tip >-
+      The total number of sL1D read requests made for a single dword of data (4B), per normalization
+      unit.
+    Read Requests (2 DWord): &Accesses_Read_Requests_(2_DWord)_tip >-
+      The total number of sL1D read requests made for a two dwords of data
+      (8B), per normalization unit.
+    Read Requests (4 DWord): &Accesses_Read_Requests_(4_DWord)_tip >-
+      The total number of sL1D read requests made for a four dwords of data
+      (16B), per normalization unit.
+    Read Requests (8 DWord): &Accesses_Read_Requests_(8_DWord)_tip >-
+      The total number of sL1D read requests made for a eight dwords of data
+      (32B), per normalization unit.
+    Read Requests (16 DWord): &Accesses_Read_Requests_(16_DWord)_tip >-
+      The total number of sL1D read requests made for a sixteen dwords of data
+      (64B), per normalization unit.
+  Scalar L1D Cache - L2 Interface:
+    sL1D-L2 Bandwidth: &sL1D-L2_Bandwidth_tip >-
+      The total number of bytes read from, written to, or atomically updated across the sL1D↔L2
+      interface, per normalization unit. Note that sL1D writes and atomics are typically unused on
+      current CDNA accelerators, so in the majority of cases this can be interpreted as an sL1D→L2
+      read bandwidth.
+    Read Requests: &sL1D-L2_Read_Requests_tip >-
+      The total number of read requests from sL1D to the L2, per normalization unit.
+    Write Requests: &sL1D-L2_Write_Requests_tip >-
+      The total number of write requests from sL1D to the L2, per normalization unit. Typically
+      unused on current CDNA accelerators.
+    Atomic Requests: &sL1D-L2_Atomic_Requests_tip >-
+      The total number of atomic requests from sL1D to the L2, per normalization unit. Typically
+      unused on current CDNA accelerators.
+    Stall Cycles: &sL1D-L2_Stall_Cycles_tip >-
+      The total number of cycles the sL1D↔L2 interface was stalled, per normalization unit.
 
 # Define the panel properties and properties of each metric in the panel.
 Panel Config:
@@ -21,17 +83,17 @@ Panel Config:
             value: AVG(((SQC_DCACHE_REQ * 100000) / (($max_sclk * $sqc_per_gpu)
               * (End_Timestamp - Start_Timestamp))))
             unit: Pct of Peak
-            tips:
+            tips: *SoL_Bandwidth_tip
           Cache Hit Rate:
             value: AVG((((SQC_DCACHE_HITS * 100) / (SQC_DCACHE_HITS + SQC_DCACHE_MISSES + SQC_DCACHE_MISSES_DUPLICATE))
               if ((SQC_DCACHE_HITS + SQC_DCACHE_MISSES + SQC_DCACHE_MISSES_DUPLICATE) != 0) else None))
             unit: Pct of Peak
-            tips:
+            tips: *SoL_Cache_Hit_Rate_tip
           sL1D-L2 BW:
             value: AVG(((SQC_TC_DATA_READ_REQ + SQC_TC_DATA_WRITE_REQ + SQC_TC_DATA_ATOMIC_REQ) * 100000)
                         / (2 * ($max_sclk * $sqc_per_gpu) * (End_Timestamp - Start_Timestamp)))
             unit: Pct of Peak
-            tips:
+            tips: *SoL_sL1D-L2_Bandwidth_tip
         comparable: false # for now
         cli_style: simple_bar
 
@@ -51,25 +113,25 @@ Panel Config:
             min: MIN((SQC_DCACHE_REQ / $denom))
             max: MAX((SQC_DCACHE_REQ / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *Accesses_Requests_tip
           Hits:
             avg: AVG((SQC_DCACHE_HITS / $denom))
             min: MIN((SQC_DCACHE_HITS / $denom))
             max: MAX((SQC_DCACHE_HITS / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *Accesses_Hits_tip
           Misses - Non Duplicated:
             avg: AVG((SQC_DCACHE_MISSES / $denom))
             min: MIN((SQC_DCACHE_MISSES / $denom))
             max: MAX((SQC_DCACHE_MISSES / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *Accesses_Misses_Non-Duplicated_tip
           Misses- Duplicated:
             avg: AVG((SQC_DCACHE_MISSES_DUPLICATE / $denom))
             min: MIN((SQC_DCACHE_MISSES_DUPLICATE / $denom))
             max: MAX((SQC_DCACHE_MISSES_DUPLICATE / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *Accesses_Misses_Duplicated_tip
           Cache Hit Rate:
             avg: AVG((((100 * SQC_DCACHE_HITS) / ((SQC_DCACHE_HITS + SQC_DCACHE_MISSES)
               + SQC_DCACHE_MISSES_DUPLICATE)) if (((SQC_DCACHE_HITS + SQC_DCACHE_MISSES)
@@ -81,7 +143,7 @@ Panel Config:
               + SQC_DCACHE_MISSES_DUPLICATE)) if (((SQC_DCACHE_HITS + SQC_DCACHE_MISSES)
               + SQC_DCACHE_MISSES_DUPLICATE) != 0) else None))
             unit: pct
-            tips: 
+            tips: *Accesses_Cache_Hit_Rate_tip
           Read Req (Total):
             avg: AVG((((((SQC_DCACHE_REQ_READ_1 + SQC_DCACHE_REQ_READ_2) + SQC_DCACHE_REQ_READ_4)
               + SQC_DCACHE_REQ_READ_8) + SQC_DCACHE_REQ_READ_16) / $denom))
@@ -90,43 +152,43 @@ Panel Config:
             max: MAX((((((SQC_DCACHE_REQ_READ_1 + SQC_DCACHE_REQ_READ_2) + SQC_DCACHE_REQ_READ_4)
               + SQC_DCACHE_REQ_READ_8) + SQC_DCACHE_REQ_READ_16) / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *Accesses_Read_Requests_(Total)_tip
           Atomic Req:
             avg: AVG((SQC_DCACHE_ATOMIC / $denom))
             min: MIN((SQC_DCACHE_ATOMIC / $denom))
             max: MAX((SQC_DCACHE_ATOMIC / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *Accesses_Atomic_Requests_tip
           Read Req (1 DWord):
             avg: AVG((SQC_DCACHE_REQ_READ_1 / $denom))
             min: MIN((SQC_DCACHE_REQ_READ_1 / $denom))
             max: MAX((SQC_DCACHE_REQ_READ_1 / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *Accesses_Read_Requests_(1_DWord)_tip
           Read Req (2 DWord):
             avg: AVG((SQC_DCACHE_REQ_READ_2 / $denom))
             min: MIN((SQC_DCACHE_REQ_READ_2 / $denom))
             max: MAX((SQC_DCACHE_REQ_READ_2 / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *Accesses_Read_Requests_(2_DWord)_tip
           Read Req (4 DWord):
             avg: AVG((SQC_DCACHE_REQ_READ_4 / $denom))
             min: MIN((SQC_DCACHE_REQ_READ_4 / $denom))
             max: MAX((SQC_DCACHE_REQ_READ_4 / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *Accesses_Read_Requests_(4_DWord)_tip
           Read Req (8 DWord):
             avg: AVG((SQC_DCACHE_REQ_READ_8 / $denom))
             min: MIN((SQC_DCACHE_REQ_READ_8 / $denom))
             max: MAX((SQC_DCACHE_REQ_READ_8 / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *Accesses_Read_Requests_(8_DWord)_tip
           Read Req (16 DWord):
             avg: AVG((SQC_DCACHE_REQ_READ_16 / $denom))
             min: MIN((SQC_DCACHE_REQ_READ_16 / $denom))
             max: MAX((SQC_DCACHE_REQ_READ_16 / $denom))
             unit: (Req  + $normUnit)
-            tips:
+            tips: *Accesses_Read_Requests_(16_DWord)_tip
 
     - metric_table:
         id: 1403
@@ -144,28 +206,28 @@ Panel Config:
             min: MIN(((((SQC_TC_DATA_READ_REQ + SQC_TC_DATA_WRITE_REQ + SQC_TC_DATA_ATOMIC_REQ) * 64)) / $denom))
             max: MAX(((((SQC_TC_DATA_READ_REQ + SQC_TC_DATA_WRITE_REQ + SQC_TC_DATA_ATOMIC_REQ) * 64)) / $denom))
             unit: (Bytes + $normUnit)
-            tips:
+            tips: *sL1D-L2_Bandwidth_tip
           Read Req:
             avg: AVG((SQC_TC_DATA_READ_REQ / $denom))
             min: MIN((SQC_TC_DATA_READ_REQ / $denom))
             max: MAX((SQC_TC_DATA_READ_REQ / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *sL1D-L2_Read_Requests_tip
           Write Req:
             avg: AVG((SQC_TC_DATA_WRITE_REQ / $denom))
             min: MIN((SQC_TC_DATA_WRITE_REQ / $denom))
             max: MAX((SQC_TC_DATA_WRITE_REQ / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *sL1D-L2_Write_Requests_tip
           Atomic Req:
             avg: AVG((SQC_TC_DATA_ATOMIC_REQ / $denom))
             min: MIN((SQC_TC_DATA_ATOMIC_REQ / $denom))
             max: MAX((SQC_TC_DATA_ATOMIC_REQ / $denom))
             unit: (Req  + $normUnit)
-            tips: 
+            tips: *sL1D-L2_Atomic_Requests_tip
           Stall Cycles:
             avg: AVG((SQC_TC_STALL / $denom))
             min: MIN((SQC_TC_STALL / $denom))
             max: MAX((SQC_TC_STALL / $denom))
             unit: (Cycles  + $normUnit)
-            tips: 
+            tips: *sL1D-L2_Stall_Cycles_tip