Skip to content
/ clinfo Public
forked from Oblomov/clinfo

Print all known information about all available OpenCL platforms and devices in the system

License

Notifications You must be signed in to change notification settings

ProGTX/clinfo

 
 

Repository files navigation

What is this?

clinfo is a simple command-line application that enumerates all possible (known) properties of the OpenCL platform and devices available on the system.

Inspired by AMD's program of the same name, it is coded in pure C and it tries to output all possible information, including those provided by platform-specific extensions, trying not to crash on unsupported properties (e.g. 1.2 properties on 1.1 platforms).

Usage

clinfo [options...]

Common used options are -l to show a synthetic summary of the available devices (without properties), and -a, to try and show properties even if clinfo would otherwise think they aren't supported by the platform or device.

Refer to the man page for further information.

Use cases

  • verify that your OpenCL environment is set up correctly; if clinfo cannot find any platform or devices (or fails to load the OpenCL dispatcher library), chances are high no other OpenCL application will run;
  • verify that your OpenCL development environment is set up correctly: if clinfo fails to build, chances are high no other OpenCL application will build;
  • explore/report the actual properties of the available device(s).

Segmentation faults

Some faulty OpenCL platforms may cause clinfo to crash. There isn't much clinfo itself can do about it, but you can try and isolate the platform responsible for this. On POSIX systems, you can generally find the platform responsible for the fault with the following one-liner:

find /etc/OpenCL/vendors/ -name '*.icd' | while read OPENCL_VENDOR_PATH ; do clinfo -l > /dev/null ; echo "$? ${OPENCL_VENDOR_PATH}" ; done

Missing information

If you know of device properties that are exposed in OpenCL (either as core properties or as extensions), but are not shown by clinfo, please open an issue providing as much information as you can. Patches and pull requests accepted too.

Building

Build status on Travis

Building requires an OpenCL SDK (or at least OpenCL headers and development files), and the standard build environment for the platform. Simply running make at the project root should work, though the project can also be configured using CMake.

Android support

Local build via Termux

One way to build the application on Android, pioneered by truboxl and described here, requires the installation of Termux, that can be installed via Google Play as well as via F-Droid.

Inside Termux, you will first need to install some common tools:

pkg install git make clang -y

You will also need to clone the clinfo repository, and fetch the OpenCL headers (we'll use the official KhronosGroup/OpenCL-Headers repository for that):

git clone https://github.com/Oblomov/clinfo
git clone https://github.com/KhronosGroup/OpenCL-Headers

(I prefer doing this from a src directory I have created for development, but as long as clinfo and OpenCL-Headers are sibling directories, the headers will be found. If not, you will have to override CPPFLAGS with e.g. export CPPFLAGS=-I/path/to/where/headers/are before running make. Of course /path/to/where/headers/are should be replaced with the actual path to which the OpenCL-Headers repository was cloned.)

You can then cd clinfo and build the application. You can try simply running make since Android should be autodetected now, buf it this fails you can also force the detectio with

make OS=Android

If linking fails due to a missing libOpenCL.so, then your Android machine probably doesn't support OpenCL. Otherwise, you should have a working clinfo you can run. You will most probably need to set LD_LIBRARY_PATH to let the program know where the OpenCL library is at runtime: you will need at least ${ANDROID_ROOT}/vendor/lib64, but on some machine the OpenCL library actually maps to a different library (e.g., on one of my systems, it maps to the GLES library, which is in a different subdirectory).

Due to this requirement, on Android the actual binary is now called clinfo.real, and the produced clinfo is just a shell script that will run the actual binary after setting LD_LIBRARY_PATH. If this is not sufficient on your installation, please open an issue and we'll try to improve the shell script to cover your use case as well.

MacOS support

clinfo should build without issues out of the box on most macOS installations (starting from OS X v10.6). In contrast to most other operating systems, the macOS system OpenCL library only supports Apple's own OpenCL platform.

To use other platforms such as PoCL, it is necessary to install an alternative OpenCL library that works as an ICD loader, such as Homebrew's ocl-icd.

To build clinfo using the Homebrew OpenCL library instead of the macOS system library, you can use

make OS=Homebrew

Windows support

The application can usually be built in Windows too (support for which required way more time than I should have spent, really, but I digress), by running make in a Developer Command Prompt for Visual Studio, provided an OpenCL SDK (such as the Intel or AMD one) is installed.

An easier option is to use CMake - especially VS2017 can just open the CMakeLists.txt and configure everything automatically.

Precompiled Windows executable are available as artefacts of the AppVeyor CI.

Build statusWindows binaries
Build status on AppVeyor 32-bit 64-bit

About

Print all known information about all available OpenCL platforms and devices in the system

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 91.6%
  • Roff 5.7%
  • Makefile 1.7%
  • Other 1.0%