GitHub - Phunkafizer/RF-Soap: Software framework for the RF soap module

Branches Tags

Name		Name	Last commit message	Last commit date
Latest commit History 3 Commits
README		README
button.cpp		button.cpp
button.h		button.h
global.cpp		global.cpp
hw.h		hw.h
main.cpp		main.cpp
makefile		makefile
rfm12.cpp		rfm12.cpp
rfm12.h		rfm12.h
task.cpp		task.cpp
task.h		task.h
timer.cpp		timer.cpp
timer.h		timer.h

Repository files navigation

Software framework for demonstrating RF SOAP modul

Features
--------
- power handling (off, on, battery check)
- button handling
- rfm12 handling
- power saving
- UART (9600 baud, 8N1)

Hints
-----
- Leave clock fuses in factory setting (1 MHz internal clock (8 MHz, clockdiv activated)

Operation
---------
- Hold main button > 1 s (or connect USB to FT232, this will also power up the module)
- if battery voltage is sufficient modul will start (middle led flashing)
- with side buttons a value can be set between 1 and 3, indicated by the LEDs
- with main button the value will be sent over radio
- when value is received, the appropriate LED will flash and value is sent over serial interface
- Hold mainbutton > 1 s to switch of