This script automates all the steps required to build various CHERI-related software.
For example cheribuild.py [options] sdk-riscv64-purecap will create an SDK that can be
used to compile software as pure-capability code for a CHERI-RISC-V CPU, and cheribuild.py [options] run-riscv64-purecap
will start an instance of CheriBSD built as pure-capability code for CHERI-RISC-V in QEMU.
cheribuild.py also allows building software for Arm's adaption of CHERI, the Morello platform, however not all targets are supported yet.
cheribuild.py has been tested and should work on FreeBSD 12 and 13.
On Linux, Ubuntu 18.04/20.04, Debian 10 and OpenSUSE Tumbleweed are supported.
macOS 10.14 and newer is also supported.
When building on macOS the following packages are required:
brew install cmake ninja libarchive git glib gnu-sed automake autoconf coreutils llvm make wget pixman pkg-config xz
# Install samba for shared mounts between host and CheriBSD on QEMU
brew install samba
# If you intend to run the morello FVP model you will also need the following:
brew install homebrew/cask/docker homebrew/cask/xquartz socat dtcIf you are building CHERI on a Debian/Ubuntu-based machine, please install the following packages:
apt install autoconf automake libtool pkg-config clang bison cmake ninja-build samba flex texinfo time libglib2.0-dev libpixman-1-dev libarchive-dev libarchive-tools libbz2-dev libattr1-dev libcap-ng-devOlder versions of Ubuntu may report errors when trying to install libarchive-tools. In this case try using apt install bsdtar instead.
If you are building CHERI on a RHEL/Fedora-based machine, please install the following packages:
dnf install libtool clang-devel bison cmake ninja-build samba flex texinfo glib2-devel pixman-devel libarchive-devel bsdtar bzip2-devel libattr-devel libcap-ng-devel expat-develIn these examples the cheribuild.py program is run from within the
cheribuild/ directory as ./cheribuild.py with options following
the main command. Please note the leading ./ before the command
name. It is also possible to add the cheribuild/ directory to your
PATH or to link the binary somewhere such as in a bin/ directory of
your choosing.
If you want to start up a QEMU VM running CheriBSD on top of the CHERI-RISC-V ISA run the following command:
./cheribuild.py run-riscv64-purecap -d (-d means build all dependencies).
This command will build the CHERI compiler, QEMU, CheriBSD, create a disk image and boot that in QEMU.
If you want to start up a QEMU VM running CheriBSD on top of the Morello ISA use the following command:
./cheribuild.py run-morello-purecap -d
By default cheribuild.py will clone all projects in ~/cheri, use ~/cheri/build for build directories
and install into ~/cheri/output. However, these directories are all configurable (see below for details).
When building for the first time, cheribuild.py will request user input multiple times, but the --force/-f flag can be used to accept the default.
If you would like to see what the script would do run it with the --pretend or -p option.
For even more detail you can also pass --verbose or -v.
It is also possible to run this script on a remote host by using the remote-cheribuild.py script that is included in this repository:
remote-cheribuild.py my.remote.server [options] <targets...> will run this script on my.remote.server.
cheribuild.py [options...] targets...
Example: to build and run a pure-capability CheriBSD for RISC-V: cheribuild.py --include-dependencies run-riscv64-purecap and
for a clean verbose build of LLVM cheribuild.py -v --clean llvm
When selecting a target you can also build all the targets that it depends on by passing the --include-dependencies or -d option.
However, some targets (e.g. all, sdk-*) will always build their dependencies because running them without building the dependencies does not make sense (see the list of targets for details).
There are many targets in cheribuild, and they fall into two categories: single
targets and multiarch targets.
Single targets, such as qemu, sail and install-morello-fvp, are for
targets that only apply natively to the host machine.
Most targets, however, are multiarch targets.
These are always of the form <name>-<architecture>, where <architecture>
indicates the architecture to compile/run code for, which will be
cross-compiling/emulating for anything other than native.
For example, cheribsd-riscv64-purecap will cross-compile CheriBSD for
pure-capability CHERI-RISC-V, disk-image-morello-purecap will create a
CheriBSD disk image for pure-capability Morello and gdb-native will build a
version of CHERI-GDB that runs natively on the host machine and be used to
remote debug CHERI-RISC-V and CHERI-MIPS.
Note that the <architecture> in the target says nothing about what it can do,
only where it can do it.
For example, llvm-native and llvm-riscv64 both exist; the former is a
CHERI-LLVM that will run natively on the host and can be used to cross compile
for both CHERI-MIPS and CHERI-RISC-V, whilst the latter is a CHERI-LLVM built
as a set of RISC-V binaries that will run on CheriBSD itself.
Where there are multiple variants of the source, there are multiple cheribuild
targets with different names which, in the case of multiarch targets, means a
different <name>.
For example, llvm refers to CHERI-LLVM, whereas morello-llvm refers to
Arm's fork of CHERI-LLVM adding Morello support, and upstream-llvm refers to
upstream's LLVM.
Thus, a target of morello-llvm-riscv64 would be Arm's Morello-extended
CHERI-LLVM fork built as a RISC-V binary to run on CheriBSD.
qemubuilds and installs CTSRD-CHERI/qemullvmbuilds and installs the CTSRD-CHERI/llvm-project toolchain (includes a compiler, linker, and all required binutils).cheribsd-<architecture>builds and installs CTSRD-CHERI/cheribsd and creates a sysroot for cross-compilation.disk-image-<architecture>creates a CheriBSD disk-image.run-<architecture>launches QEMU with the CheriBSD disk image.freestanding-sdkbuilds everything required to build and run-ffreestandingbinaries: compiler, linker and qemucheribsd-sdk-<architecture>builds everything required to compile binaries for CheriBSD:freestanding-sdkandcheribsd-sysrootsdk-<architecture>is an alias forcheribsd-sdk-<architecture>all-<architecture>: runs all the targets listed so far (run-<architecture>comes last so that you can interact with QEMU)
riscv64: RISC-V without CHERI supportriscv64-purecap: pure-capability RISC-V: all pointers are CHERI capabilities.mips64: MIPS without CHERI supportmips64-purecap: pure-capability MIPS: all pointers are CHERI capabilities.aarch64: AArch64 without CHERI supportmorello-purecap: pure-capability AArch64 (Morello): all pointers are CHERI capabilities.amd64: 64-bit Intel x86.
Most projects (the ones that don't build a full OS, but just a program or library) also support -native configuration
that builds for the host. This can be useful to verify that changes made for CHERI have not broken the native builds.
The following targets are also supported, but discouraged, as they serve little benefit over and above their non-CHERI counterparts, and so should not be used unless absolutely sure.
If you still wish to use them despite that, they can be enabled with --enable-hybrid-targets.
riscv64-hybrid: RISC-V with CHERI support: pointers are integers by default but can be annotated with__capabilityto use CHERI capabilities.mips64-hybrid: MIPS with CHERI support: pointers are integers by default but can be annotated with__capabilityto use CHERI capabilities.morello-hybrid: AArch64 with CHERI (Morello) support: pointers are integers by default but can be annotated with__capabilityto use CHERI capabilities.
For the cheribsd, disk-image and run targets the hybrid vs purecap distinction applies solely to userspace (see below for more details).
freebsd-<architecture>builds and installs freebsd/freebsd.disk-image-freebsd-<architecture>creates a FreeBSD disk-image.run-freebsd-<architecture>launches QEMU with the FreeBSD disk image.cmakebuilds and installs latest CMakecheriosbuilds and installs CTSRD-CHERI/cherioscheritracebuilds and installs CTSRD-CHERI/cheritracesqlite-<architecture>builds and installs CTSRD-CHERI/sqlitenginx-<architecture>builds and installs CTSRD-CHERI/nginxpostgres-<architecture>builds and installs CTSRD-CHERI/postgres
In order to run CheriBSD you will first need to compile QEMU (cheribuild.py qemu).
You will also need to build LLVM (this includes a compiler and linker suitable for CHERI) using cheribuild.py llvm.
The compiler can generate CHERI code for MIPS (64-bit only) and RISCV (32 and 64-bit).
All binaries will by default be installed to ~/cheri/sdk/bin.
To build CheriBSD run cheribuild.py cheribsd-<architecture>, with architecture being one of
riscv64: Kernel and userspace are RISC-V without CHERI support.riscv64-purecap: Kernel is RISC-V with CHERI support (hybrid), and all userspace programs built as pure-capability CHERI binaries.mips64: Kernel and userspace are MIPS without CHERI support.mips64-purecap: Kernel is MIPS with CHERI support (hybrid), and all userspace programs built as pure-capability CHERI binaries.aarch64: Kernel and userspace are AArch64 without CHERI support.morello-purecap: Kernel is AArch64 with CHERI (Morello) support (hybrid), and all userspace programs built as pure-capability CHERI binaries.amd64: Kernel and userspace are 64-bit Intel x86.
The following targets also exist but are disabled by default and discouraged (see Supported architectures for more details):
riscv64-hybrid: Kernel is RISC-V with CHERI support (hybrid), but most programs built as plain RISC-V.mips64-hybrid: Kernel is MIPS with CHERI support (hybrid), but most programs built as plain RISC-V.morello-hybrid: Kernel is AArch64 with CHERI (Morello) support (hybrid), but most programs built as plain AArch64.
The disk image is created by the cheribuild.py disk-image-<architecture> target and can then be used as a boot disk by QEMU.
In order to customize the disk image it will add all files under (by default) ~/cheri/extra-files/
to the resulting image. When building the image cheribuild will ask you whether it should add your
SSH public keys to the /root/.ssh/authorized_keys file in the CheriBSD image. It will also
generate SSH host keys for the image so that those don't change everytime the image is rebuilt.
A suitable /etc/rc.conf and /etc/fstab will also be added to this directory and can then be customized.
The default path for the disk image is ~/cheri/output/cheribsd-<architecture>.img, i.e.
cheribsd-riscv64-purecap.img for pure-capability RISC-V or cheribsd-mips64.img for MIPS without CHERI support.
Since cheribuild.py was designed to be run by multiple users on a shared build system, it will tell QEMU
to listen on a port on localhost that depends on the user ID to avoid conflicts.
It will print a message such as Listening for SSH connections on localhost:12374, i.e. you will need
to use ssh -p 12374 root@localhost to connect to CheriBSD.
This can be changed using cheribuild.py --run/ssh-forwarding-port <portno> run-<architecture> or be made persistent
with the following configuration file (see below for more details on the config file format and path):
{
"run-riscv64-hybrid": {
"ssh-forwarding-port": 12345
},
"run-riscv64-purecap": {
"ssh-forwarding-port": 12346
}
}Connecting to CheriBSD via ssh can take a few seconds. Further connections after the first can be sped up by using the openssh ControlMaster setting:
Host cheribsd-riscv
User root
Port 12345
HostName localhost
ControlPath ~/.ssh/controlmasters/%r@%h:%p
ControlMaster auto
StrictHostKeyChecking no
Host cheribsd-riscv-purecap
User root
Port 12346
HostName localhost
ControlPath ~/.ssh/controlmasters/%r@%h:%p
ControlMaster auto
StrictHostKeyChecking no
You can also build a version of GDB that understands CHERI capabilities
either as a binary for the host (cheribuild.py gdb-native) to debug coredumps or as a gues binary to use
for live debugging in CheriBSD (cheribuild.py gdb-mips64-hybrid for MIPS and cheribuild.py gdb-riscv64-hybrid for RISC-V).
The guest binary will be installed in usr/local/bin/gdb under your CheriBSD rootfs and will be included
when you build a new disk image (cheribuild.py disk-image-<arch>).
The native GDB will be installed to your SDK binary directory (~/cheri/sdk/bin by default).
In order to cross-compile projects such as NGINX or PostgreSQL for CheriBSD you will first need a full SDK:
cheribuild.py cheribsd-sdk-mips64-purecap. Then you can then run cheribuild.py postgres-mips64-purecap or cheribuild.py nginx-mips64-purecap, etc.
By default, these projects will be installed into your CheriBSD rootfs under /opt and will therefore be
automatically included the next time you build a disk image.
See cheribuild.py --list-targets for a full list of targets.
There is currently experimental support to build libcxx as a baremetal library running on top of newlib.
This can be done by running cheribuild.py libcxx-baremetal -d.
There are a lot of options to customize the behaviour of this script: e.g. the directory for
the cloned sources can be changed from the default of $HOME/cheri using the --source-root= option.
A full list of the available options with descriptions can be found towards the end of this document.
The options can also be made persistent by storing them in a JSON config file (~/.config/cheribuild.json).
Options passed on the command line will override those read from the config file.
The key in the JSON config file is the same as the long option name without the intial --.
For example if you want cheribuild.py to behave as if you had passed
--source-root /foo/bar/cheri/src --output-root /foo/bar/cheri/output --build-root /build -j 4 --cheribsd/build-options "-DWITHOUT_ZFS FOO=bar", you can write the following JSON to
~/.config/cheribuild.json:
{
"source-root": "/foo/bar/cheri/src",
// build-root defaults to <source-root>/build
"build-root": "/build",
// output-root defaults to <source-root>/output
"output-root": "/foo/bar/cheri/output",
"make-jobs": 4,
"cheribsd": {
"build-options": ["-DWITHOUT_ZFS", "FOO=bar"]
}
}If you invoke cheribuild.py as a prefixed command (e.g. debug-cheribuild.py, stable-cheribuild.py) it will
read the file ~/.config/{prefix}-cheribuild.json instead. This makes it easy to build
debug and release builds of e.g. LLVM or build CheriBSD with various different flags.
If you have many config files (e.g. cheribsd-stable, -debug, -release, etc.) it is also
possible to #include a base config file and only write the settings that are different.
For example a ~/.config/stable-cheribuild.json could look like this:
{
"build-root": "/build-stable",
"#include": "cheribuild-common.json",
"cheribsd": {
"source-directory": "/my/other/cheribsd/worktree/with/the/stable/branch"
}
}You will need to install python3-argcomplete:
pip3 install --user argcomplete
# Or install latest version from git:
git clone https://github.com/kislyuk/argcomplete.git
cd argcomplete
python3 setup.py install --user
NOTE: On FreeBSD pip and setuptools are not installed by default, so you need to run
python3 -m ensurepip --user first.
# NOTE: the next command doesn't seem to work on FreeBSD
~/.local/bin/activate-global-python-argcomplete --user
# On FreeBSD (or if the above work for some other reason) do this:
echo 'eval "$(register-python-argcomplete cheribuild.py)"' >> ~/.bashrc
With tcsh add the following line to ~/.cshrc:
eval "`register-python-argcomplete --shell tcsh cheribuild.py`"
Note: python-argcomplete-tcsh must be in $PATH (should be in ~/.local/bin/).
I would also suggest using set autolist to display all options.
NOTE: Since there are so many per-project options that are identical between all projects they are not all shown when running --help. To see the full list of options that can be specified, run cheribuild.py --help-all. Since this will generate lots of output it probably makes more sense to run cheribuild.py --help-all | grep <target_name>.
usage: cheribuild.py [-h] [--config-file FILE] [--help-all] [--pretend] [--build] [--test] [--benchmark]
[--build-and-test] [--list-targets] [--dump-configuration] [--print-targets-only]
[--clang-path CLANG-PATH] [--clang++-path CLANG++-PATH] [--clang-cpp-path CLANG-CPP-PATH]
[--pass-k-to-make] [--with-libstatcounters | --no-with-libstatcounters]
[--skip-world | --no-skip-world | --skip-buildworld | --no-skip-buildworld]
[--skip-kernel | --no-skip-kernel | --skip-buildkernel | --no-skip-buildkernel]
[--freebsd-subdir SUBDIRS] [--buildenv] [--libcompat-buildenv] [--debug-output]
[--mips-float-abi {soft,hard}] [--aarch64-fp-and-simd-options {default,nosimd,soft,soft_simd}]
[--cross-compile-linkage {default,dynamic,static}]
[--subobject-bounds {conservative,subobject-safe,aggressive,very-aggressive,everywhere-unsafe}]
[--use-cheri-ubsan | --no-use-cheri-ubsan]
[--use-cheri-ubsan-runtime | --no-use-cheri-ubsan-runtime]
[--subobject-debug | --no-subobject-debug]
[--clang-colour-diags | --no-clang-colour-diags | --clang-color-diags | --no-clang-color-diags]
[--use-sdk-clang-for-native-xbuild | --no-use-sdk-clang-for-native-xbuild]
[--configure-only | --no-configure-only] [--skip-install | --no-skip-install]
[--skip-build | --no-skip-build] [--skip-sdk | --no-skip-sdk] [--skip-dependency-filter REGEX]
[--trap-on-unrepresentable | --no-trap-on-unrepresentable]
[--qemu-gdb-break-on-cheri-trap | --no-qemu-gdb-break-on-cheri-trap]
[--qemu-gdb-debug-userspace-program QEMU-GDB-DEBUG-USERSPACE-PROGRAM]
[--only-dependencies | --no-only-dependencies] [--docker | --no-docker]
[--docker-container DOCKER-CONTAINER] [--docker-reuse-container | --no-docker-reuse-container]
[--compilation-db] [--wait-for-debugger | --no-wait-for-debugger]
[--debugger-in-tmux-pane | --no-debugger-in-tmux-pane] [--gdb-random-port | --no-gdb-random-port]
[--run-under-gdb | --no-run-under-gdb] [--test-ssh-key TEST-SSH-KEY]
[--use-minimal-benchmark-kernel | --no-use-minimal-benchmark-kernel] [--test-extra-args ARGS]
[--interact-after-tests] [--test-environment-only] [--test-ld-preload TEST-LD-PRELOAD]
[--benchmark-fpga-extra-args ARGS] [--benchmark-clean-boot | --no-benchmark-clean-boot]
[--benchmark-extra-args ARGS] [--benchmark-ssh-host BENCHMARK-SSH-HOST]
[--benchmark-csv-suffix BENCHMARK-CSV-SUFFIX] [--benchmark-ld-preload BENCHMARK-LD-PRELOAD]
[--benchmark-with-debug-kernel | --no-benchmark-with-debug-kernel]
[--benchmark-lazy-binding | --no-benchmark-lazy-binding]
[--benchmark-iterations BENCHMARK-ITERATIONS] [--benchmark-with-qemu | --no-benchmark-with-qemu]
[--shallow-clone | --no-shallow-clone] [--beri-fpga-env-setup-script BERI-FPGA-ENV-SETUP-SCRIPT]
[--arm-none-eabi-prefix ARM-NONE-EABI-PREFIX]
[--build-morello-firmware-from-source | --no-build-morello-firmware-from-source]
[--list-kernels | --no-list-kernels] [--remote-morello-board REMOTE-MORELLO-BOARD]
[--get-config-option KEY] [--quiet | --no-quiet | -q] [--verbose | --no-verbose | -v]
[--clean | --no-clean | -c] [--force | --no-force | -f] [--logfile | --no-logfile]
[--skip-update | --no-skip-update] [--confirm-clone | --no-confirm-clone]
[--force-update | --no-force-update]
[--skip-configure | --no-skip-configure | --reconfigure | --no-reconfigure | --force-configure | --no-force-configure]
[--include-dependencies] [--include-toolchain-dependencies | --no-include-toolchain-dependencies]
[--start-with TARGET | --start-after TARGET] [--compilation-db-in-source-dir]
[--generate-cmakelists | --no-generate-cmakelists] [--make-without-nice | --no-make-without-nice]
[--make-jobs MAKE-JOBS] [--source-root SOURCE-ROOT] [--output-root OUTPUT-ROOT]
[--build-root BUILD-ROOT] [--tools-root TOOLS-ROOT] [--morello-sdk-root MORELLO-SDK-ROOT]
[--sysroot-install-root SYSROOT-INSTALL-ROOT] [--upstream-qemu/targets UPSTREAM-QEMU/TARGETS]
[--qemu/targets QEMU/TARGETS] [--qemu/statistics | --qemu/no-statistics]
[--run-rtems/ephemeral | --run-rtems/no-ephemeral]
[--cheri-syzkaller/run-sysgen | --cheri-syzkaller/no-run-sysgen]
[--run-syzkaller/syz-config RUN-SYZKALLER/SYZ-CONFIG]
[--run-syzkaller/ssh-privkey syzkaller_id_rsa] [--run-syzkaller/workdir DIR]
[--freebsd/build-tests | --freebsd/no-build-tests] [--freebsd/build-options OPTIONS]
[--freebsd/debug-info | --freebsd/no-debug-info] [--freebsd/subdir SUBDIRS]
[--cheribsd/build-tests | --cheribsd/no-build-tests] [--cheribsd/build-options OPTIONS]
[--cheribsd/debug-info | --cheribsd/no-debug-info] [--cheribsd/subdir SUBDIRS]
[--cheribsd/build-fpga-kernels | --cheribsd/no-build-fpga-kernels]
[--cheribsd/default-kernel-abi {hybrid,purecap}]
[--cheribsd/build-alternate-abi-kernels | --cheribsd/no-build-alternate-abi-kernels]
[--cheribsd/build-bench-kernels | --cheribsd/no-build-bench-kernels]
[--cheribsd/caprevoke-kernel | --cheribsd/no-caprevoke-kernel]
[--cheribsd-mfs-root-kernel/build-tests | --cheribsd-mfs-root-kernel/no-build-tests]
[--cheribsd-mfs-root-kernel/build-options OPTIONS]
[--cheribsd-mfs-root-kernel/debug-info | --cheribsd-mfs-root-kernel/no-debug-info]
[--cheribsd-mfs-root-kernel/build-fpga-kernels | --cheribsd-mfs-root-kernel/no-build-fpga-kernels]
[--cheribsd-mfs-root-kernel/default-kernel-abi {hybrid,purecap}]
[--cheribsd-mfs-root-kernel/build-alternate-abi-kernels | --cheribsd-mfs-root-kernel/no-build-alternate-abi-kernels]
[--cheribsd-mfs-root-kernel/build-bench-kernels | --cheribsd-mfs-root-kernel/no-build-bench-kernels]
[--cheribsd-mfs-root-kernel/caprevoke-kernel | --cheribsd-mfs-root-kernel/no-caprevoke-kernel]
[--freebsd-release/build-tests | --freebsd-release/no-build-tests]
[--freebsd-release/build-options OPTIONS]
[--freebsd-release/debug-info | --freebsd-release/no-debug-info] [--freebsd-release/subdir SUBDIRS]
[--cheribsd-release/build-tests | --cheribsd-release/no-build-tests]
[--cheribsd-release/build-options OPTIONS]
[--cheribsd-release/debug-info | --cheribsd-release/no-debug-info]
[--cheribsd-release/subdir SUBDIRS]
[--cheribsd-release/build-fpga-kernels | --cheribsd-release/no-build-fpga-kernels]
[--cheribsd-release/default-kernel-abi {hybrid,purecap}]
[--cheribsd-release/build-alternate-abi-kernels | --cheribsd-release/no-build-alternate-abi-kernels]
[--cheribsd-release/build-bench-kernels | --cheribsd-release/no-build-bench-kernels]
[--cheribsd-release/caprevoke-kernel | --cheribsd-release/no-caprevoke-kernel]
[--cheribsd-sysroot/remote-sdk-path PATH] [--disk-image-minimal/extra-files DIR]
[--disk-image-minimal/path IMGPATH] [--disk-image-mfs-root/extra-files DIR]
[--disk-image-mfs-root/path IMGPATH] [--disk-image/extra-files DIR] [--disk-image/path IMGPATH]
[--rootfs-tarball/extra-files DIR] [--rootfs-tarball/path IMGPATH]
[--disk-image-freebsd/extra-files DIR] [--disk-image-freebsd/path IMGPATH] [--freertos/demo DEMO]
[--freertos/prog PROG] [--freertos/bsp BSP] [--run/ssh-forwarding-port PORT]
[--run/ephemeral | --run/no-ephemeral] [--run/remote-kernel-path RUN/REMOTE-KERNEL-PATH]
[--run/alternative-kernel RUN/ALTERNATIVE-KERNEL] [--run/kernel-abi {hybrid,purecap}]
[--run-freertos/ephemeral | --run-freertos/no-ephemeral] [--run-freertos/demo DEMO]
[--run-freertos/prog PROG] [--run-freertos/bsp BSP] [--run-minimal/ssh-forwarding-port PORT]
[--run-minimal/ephemeral | --run-minimal/no-ephemeral]
[--run-minimal/remote-kernel-path RUN-MINIMAL/REMOTE-KERNEL-PATH]
[--run-minimal/alternative-kernel RUN-MINIMAL/ALTERNATIVE-KERNEL]
[--run-minimal/kernel-abi {hybrid,purecap}] [--run-mfs-root/ssh-forwarding-port PORT]
[--run-mfs-root/ephemeral | --run-mfs-root/no-ephemeral]
[--run-mfs-root/remote-kernel-path RUN-MFS-ROOT/REMOTE-KERNEL-PATH]
[--run-mfs-root/alternative-kernel RUN-MFS-ROOT/ALTERNATIVE-KERNEL]
[--run-mfs-root/kernel-abi {hybrid,purecap}] [--sslproc/build-tests | --sslproc/no-build-tests]
[--bash/set-as-root-shell | --bash/no-set-as-root-shell]
[--qtbase-dev/build-tests | --qtbase-dev/no-build-tests]
[--qtbase-dev/build-examples | --qtbase-dev/no-build-examples]
[--qtbase-dev/assertions | --qtbase-dev/no-assertions]
[--qtbase-dev/minimal | --qtbase-dev/no-minimal]
[--qtwebkit/build-jsc-only | --qtwebkit/no-build-jsc-only]
[--morello-webkit/backend {cloop,tier1asm,tier2asm}]
[--morello-webkit/tier2ptrliterals | --morello-webkit/no-tier2ptrliterals]
[--morello-webkit/jsheapoffsets | --morello-webkit/no-jsheapoffsets]
[TARGET ...]
positional arguments:
TARGET The targets to build
optional arguments:
-h, --help show this help message and exit
--help-all, --help-hidden
Show all help options, including the target-specific ones.
--pretend, -p Only print the commands instead of running them (default: 'False')
--pass-k-to-make, -k Pass the -k flag to make to continue after the first error (default: 'False')
--debug-output, -vv Extremely verbose output (default: 'False')
--clang-colour-diags, --no-clang-colour-diags, --clang-color-diags, --no-clang-color-diags
Force CHERI clang to emit coloured diagnostics (default: 'True')
--configure-only, --no-configure-only
Only run the configure step (skip build and install) (default: 'False')
--skip-install, --no-skip-install
Skip the install step (only do the build) (default: 'False')
--skip-build, --no-skip-build
Skip the build step (only do the install) (default: 'False')
--only-dependencies, --no-only-dependencies
Only build dependencies of targets, not the targets themselves (default: 'False')
--compilation-db, --cdb
Create a compile_commands.json file in the build dir (requires Bear for non-CMake projects)
(default: 'False')
--shallow-clone, --no-shallow-clone
Perform a shallow `git clone` when cloning new projects. This can save a lot of time for
largerepositories such as FreeBSD or LLVM. Use `git fetch --unshallow` to convert to a non-
shallow clone (default: 'True')
--build-morello-firmware-from-source, --no-build-morello-firmware-from-source
Build the firmware from source instead of downloading the latest release. (default: 'False')
--remote-morello-board REMOTE-MORELLO-BOARD
SSH hostname of a Morello board. When set, some projects will run their test suites on the
remote board instead of QEMU.
--quiet, --no-quiet, -q
Don't show stdout of the commands that are executed (default: 'False')
--verbose, --no-verbose, -v
Print all commmands that are executed (default: 'False')
--clean, --no-clean, -c
Remove the build directory before build (default: 'False')
--force, --no-force, -f
Don't prompt for user input but use the default action (default: 'False')
--logfile, --no-logfile
Write a logfile for the build steps (default: 'False')
--skip-update, --no-skip-update
Skip the git pull step (default: 'False')
--confirm-clone, --no-confirm-clone
Ask for confirmation before cloning repositories. (default: 'False')
--force-update, --no-force-update
Always update (with autostash) even if there are uncommitted changes (default: 'False')
--skip-configure, --no-skip-configure
Skip the configure step (default: 'False')
--reconfigure, --no-reconfigure, --force-configure, --no-force-configure
Always run the configure step, even for CMake projects with a valid cache. (default: 'False')
--compilation-db-in-source-dir
Generate a compile_commands.json and also copy it to the source directory (default: 'False')
--generate-cmakelists, --no-generate-cmakelists
Generate a CMakeLists.txt that just calls cheribuild. Useful for IDEs that only support CMake
(default: 'False')
--make-without-nice, --no-make-without-nice
Run make/ninja without nice(1) (default: 'False')
--make-jobs MAKE-JOBS, -j MAKE-JOBS
Number of jobs to use for compiling (default: '<system-dependent>')
Actions to be performed:
--build Run (usually build+install) chosen targets (default)
--test, --run-tests Run tests for the passed targets instead of building them
--benchmark Run tests for the passed targets instead of building them
--build-and-test Run chosen targets and then run any tests afterwards
--list-targets List all available targets and exit
--dump-configuration Print the current configuration as JSON. This can be saved to ~/.config/cheribuild.json to make
it persistent
--print-targets-only Don't run the build but instead only print the targets that would be executed (default: 'False')
--list-kernels, --no-list-kernels
List available kernel configs to run and exit (default: 'False')
--get-config-option KEY
Print the value of config option KEY and exit
Selecting which dependencies are built:
--skip-sdk, --no-skip-sdk
When building with --include-dependencies ignore the SDK dependencies. Saves a lot of time when
building libc++, etc. with dependencies but the sdk is already up-to-date. This is like --no-
include-toolchain-depedencies but also skips the target that builds the sysroot. (default:
'False')
--skip-dependency-filter REGEX
A regular expression to match against to target names that should be skipped when using--
include-dependency. Can be passed multiple times to add more patterns. (default: '[]')
--include-dependencies, -d
Also build the dependencies of targets passed on the command line. Targets passed on the command
line will be reordered and processed in an order that ensures dependencies are built before the
real target. (run --list-targets for more information). By default this does not build toolchain
targets such as LLVM. Pass --include-toolchain-dependencies to also build those. (default:
'False')
--include-toolchain-dependencies, --no-include-toolchain-dependencies
Include toolchain targets such as LLVM and QEMU when --include-dependencies is set. (default:
'True')
--start-with TARGET Start building at TARGET (useful when resuming an interrupted --include-depedencies build)
--start-after TARGET Start building after TARGET (useful when resuming an interrupted --include-depedencies build)
Configuration of default paths:
--config-file FILE The config file that is used to load the default settings (default:
'$HOME/.config/cheribuild.json')
--clang-path CLANG-PATH, --cc-path CLANG-PATH
The C compiler to use for host binaries (must be compatible with Clang >= 3.7)
--clang++-path CLANG++-PATH, --c++-path CLANG++-PATH
The C++ compiler to use for host binaries (must be compatible with Clang >= 3.7)
--clang-cpp-path CLANG-CPP-PATH, --cpp-path CLANG-CPP-PATH
The C preprocessor to use for host binaries (must be compatible with Clang >= 3.7)
--beri-fpga-env-setup-script BERI-FPGA-ENV-SETUP-SCRIPT
Custom script to source to setup PATH and quartus, default to using cheri-cpu/cheri/setup.sh
--arm-none-eabi-prefix ARM-NONE-EABI-PREFIX
Prefix for arm-none-eabi-gcc binaries (e.g. /usr/bin/arm-none-eabi-). Available
athttps://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-
toolchain/gnu-rm/downloads (default: '')
--source-root SOURCE-ROOT
The directory to store all sources (default: '$HOME/cheri')
--output-root OUTPUT-ROOT
The directory to store all output (default: '<SOURCE_ROOT>/output')
--build-root BUILD-ROOT
The directory for all the builds (default: '<SOURCE_ROOT>/build')
--tools-root TOOLS-ROOT
The directory to find sdk and bootstrap tools (default: '<OUTPUT_ROOT>')
--morello-sdk-root MORELLO-SDK-ROOT
The directory to find/install the Morello SDK (default: ''<TOOLS_ROOT>/morello-sdk'')
--sysroot-install-root SYSROOT-INSTALL-ROOT, --sysroot-install-dir SYSROOT-INSTALL-ROOT
Sysroot prefix (default: '<TOOLS_ROOT>')
Adjust flags used when compiling MIPS/CHERI projects:
--with-libstatcounters, --no-with-libstatcounters
Link cross compiled CHERI project with libstatcounters. (default: 'False')
--mips-float-abi {soft,hard}
The floating point ABI to use for building MIPS+CHERI programs (default: 'soft')
--aarch64-fp-and-simd-options {default,nosimd,soft,soft_simd}
The floating point/SIMD mode to use for building AArch64 programs (default: 'default')
--cross-compile-linkage {default,dynamic,static}
Whether to link cross-compile projects static or dynamic by default (default: 'default')
--subobject-bounds {conservative,subobject-safe,aggressive,very-aggressive,everywhere-unsafe}
Whether to add additional CSetBounds to subobject references/&-operator
--use-cheri-ubsan, --no-use-cheri-ubsan
Add compiler flags to detect certain undefined CHERI behaviour at runtime (default: 'False')
--use-cheri-ubsan-runtime, --no-use-cheri-ubsan-runtime
Use the UBSan runtime to provide more detailed information on undefined CHERI behaviour.If false
(the default) the compiler will generate a trap instruction instead. (default: 'False')
--subobject-debug, --no-subobject-debug
Clear software permission bit 2 when subobject bounds reduced size (Note: this should be turned
off for benchmarks!) (default: 'True')
--use-sdk-clang-for-native-xbuild, --no-use-sdk-clang-for-native-xbuild
Compile cross-compile project with CHERI clang from the SDK instead of host compiler (default:
'False')
Configuration for running tests:
--test-ssh-key TEST-SSH-KEY
The SSH key to used to connect to the QEMU instance when running tests on CheriBSD. If not
specified a key will be generated in the build-root directory on-demand.
--use-minimal-benchmark-kernel, --no-use-minimal-benchmark-kernel
Use a CHERI BENCHMARK version of the cheribsd-mfs-root-kernel (without INVARIATES) for the run-
minimal target and for tests. This can speed up longer running tests. This is the default for
PostgreSQL and libc++ tests (passing use-minimal-benchmark-kernel can force these tests to use
an INVARIANTS kernel). (default: 'False')
--test-extra-args ARGS
Additional flags to pass to the test script in --test
--interact-after-tests
Interact with the CheriBSD instance after running the tests on QEMU (only for --test) (default:
'False')
--test-environment-only
Don't actually run the tests. Instead setup a QEMU instance with the right paths set up.
(default: 'False')
--test-ld-preload TEST-LD-PRELOAD
Preload the given library before running tests
Configuration for running benchmarks:
--benchmark-fpga-extra-args ARGS
Extra options for the FPGA management script
--benchmark-clean-boot, --no-benchmark-clean-boot
Reboot the FPGA with a new bitfile and kernel before running benchmarks. If not set, assume the
FPGA is running. (default: 'False')
--benchmark-extra-args ARGS
Additional flags to pass to the program executed in --benchmark
--benchmark-ssh-host BENCHMARK-SSH-HOST
The SSH hostname/IP for the benchmark FPGA (default: 'cheri-fpga')
--benchmark-csv-suffix BENCHMARK-CSV-SUFFIX
Add a custom suffix for the statcounters CSV.
--benchmark-ld-preload BENCHMARK-LD-PRELOAD
Preload the given library before running benchmarks
--benchmark-with-debug-kernel, --no-benchmark-with-debug-kernel
Run the benchmark with a kernel that has assertions enabled. (default: 'False')
--benchmark-lazy-binding, --no-benchmark-lazy-binding
Run the benchmark without setting LD_BIND_NOW. (default: 'False')
--benchmark-iterations BENCHMARK-ITERATIONS
Override the number of iterations for the benchmark. Note: not all benchmarks support this
option
--benchmark-with-qemu, --no-benchmark-with-qemu
Run the benchmarks on QEMU instead of the FPGA (only useful to collect instruction counts or
test the benchmarks) (default: 'False')
Configuration for launching QEMU (and other simulators):
--trap-on-unrepresentable, --no-trap-on-unrepresentable
Raise a CHERI exception when capabilities become unreprestable instead of detagging. Useful for
debugging, but deviates from the spec, and therefore off by default. (default: 'False')
--qemu-gdb-break-on-cheri-trap, --no-qemu-gdb-break-on-cheri-trap
Drop into GDB attached to QEMU when a CHERI exception is triggered (QEMU only). (default:
'False')
--qemu-gdb-debug-userspace-program QEMU-GDB-DEBUG-USERSPACE-PROGRAM
Print the command to debug the following userspace program in GDB attaced to QEMU
--wait-for-debugger, --no-wait-for-debugger
Start QEMU in the 'wait for a debugger' state whenlaunching CheriBSD,FreeBSD, etc. (default:
'False')
--debugger-in-tmux-pane, --no-debugger-in-tmux-pane
Start Qemu and gdb in another tmux split (default: 'False')
--gdb-random-port, --no-gdb-random-port
Wait for gdb using a random port (default: 'True')
--run-under-gdb, --no-run-under-gdb
Run tests/benchmarks under GDB. Note: currently most targets ignore this flag. (default:
'False')
FreeBSD and CheriBSD build configuration:
--skip-world, --no-skip-world, --skip-buildworld, --no-skip-buildworld
Skip the buildworld-related steps when building FreeBSD or CheriBSD (default: 'False')
--skip-kernel, --no-skip-kernel, --skip-buildkernel, --no-skip-buildkernel
Skip the buildkernel step when building FreeBSD or CheriBSD (default: 'False')
--freebsd-subdir SUBDIRS, --subdir SUBDIRS
Only build subdirs SUBDIRS of FreeBSD/CheriBSD instead of the full tree. Useful for quickly
rebuilding individual programs/libraries. If more than one dir is passed they will be processed
in order. Note: This will break if not all dependencies have been built.
--buildenv Open a shell with the right environment for building the project. Currently only works for
FreeBSD/CheriBSD (default: 'False')
--libcompat-buildenv, --libcheri-buildenv
Open a shell with the right environment for building compat libraries. (default: 'False')
Options controlling the use of docker for building:
--docker, --no-docker
Run the build inside a docker container (default: 'False')
--docker-container DOCKER-CONTAINER
Name of the docker container to use (default: 'ctsrd/cheribuild-docker')
--docker-reuse-container, --no-docker-reuse-container
Attach to the same container again (note: docker-container option must be an id rather than a
container name (default: 'False')
Options for target 'upstream-qemu':
--upstream-qemu/targets UPSTREAM-QEMU/TARGETS
Build QEMU for the following targets (default:
'aarch64-softmmu,mips64-softmmu,riscv64-softmmu,riscv32-softmmu,x86_64-softmmu')
Options for target 'qemu':
--qemu/targets QEMU/TARGETS
Build QEMU for the following targets (default: 'aarch64-softmmu,morello-
softmmu,mips64-softmmu,mips64cheri128-softmmu,riscv64-softmmu,riscv64cheri-
softmmu,riscv32-softmmu,riscv32cheri-softmmu,x86_64-softmmu')
--qemu/statistics, --qemu/no-statistics
Collect statistics on out-of-bounds capability creation. (default: 'False')
Options for target 'run-rtems':
--run-rtems/ephemeral, --run-rtems/no-ephemeral
Run qemu in 'snapshot' mode, changes to the disk image are non-persistent (default: 'False')
Options for target 'cheri-syzkaller':
--cheri-syzkaller/run-sysgen, --cheri-syzkaller/no-run-sysgen
Rerun syz-extract and syz-sysgen to rebuild generated Go syscall descriptions. (default:
'False')
Options for target 'run-syzkaller':
--run-syzkaller/syz-config RUN-SYZKALLER/SYZ-CONFIG
Path to the syzkaller configuration file to use.
--run-syzkaller/ssh-privkey syzkaller_id_rsa
A directory with additional files that will be added to the image (default: '$SOURCE_ROOT/extra-
files/syzkaller_id_rsa')
--run-syzkaller/workdir DIR
Working directory for syzkaller output.
Options for target 'freebsd':
--freebsd/build-tests, --freebsd/no-build-tests
Build the tests (default: 'True')
--freebsd/build-options OPTIONS
Additional make options to be passed to make when building FreeBSD/CheriBSD. See `man src.conf`
for more info. (default: '[]')
--freebsd/debug-info, --freebsd/no-debug-info
pass make flags for building with debug info (default: 'True')
--freebsd/subdir SUBDIRS
Only build subdirs SUBDIRS instead of the full tree. Useful for quickly rebuilding individual
programs/libraries. If more than one dir is passed, they will be processed in order. Note: This
will break if not all dependencies have been built. (default: 'the value of the global
--freebsd-subdir options')
Options for target 'cheribsd':
--cheribsd/build-tests, --cheribsd/no-build-tests
Build the tests (default: 'True')
--cheribsd/build-options OPTIONS
Additional make options to be passed to make when building FreeBSD/CheriBSD. See `man src.conf`
for more info. (default: '[]')
--cheribsd/debug-info, --cheribsd/no-debug-info
pass make flags for building with debug info (default: 'True')
--cheribsd/subdir SUBDIRS
Only build subdirs SUBDIRS instead of the full tree. Useful for quickly rebuilding individual
programs/libraries. If more than one dir is passed, they will be processed in order. Note: This
will break if not all dependencies have been built. (default: 'the value of the global
--freebsd-subdir options')
--cheribsd/build-fpga-kernels, --cheribsd/no-build-fpga-kernels
Also build kernels for the FPGA. (default: 'False')
--cheribsd/default-kernel-abi {hybrid,purecap}
Select default kernel to build (default: 'hybrid')
--cheribsd/build-alternate-abi-kernels, --cheribsd/no-build-alternate-abi-kernels
Also build kernels with non-default ABI (purecap or hybrid) (default: 'True')
--cheribsd/build-bench-kernels, --cheribsd/no-build-bench-kernels
Also build benchmark kernels (default: 'False')
--cheribsd/caprevoke-kernel, --cheribsd/no-caprevoke-kernel
Build kernel with caprevoke support (experimental) (default: 'False')
Options for target 'cheribsd-mfs-root-kernel':
--cheribsd-mfs-root-kernel/build-tests, --cheribsd-mfs-root-kernel/no-build-tests
Build the tests (default: 'True')
--cheribsd-mfs-root-kernel/build-options OPTIONS
Additional make options to be passed to make when building FreeBSD/CheriBSD. See `man src.conf`
for more info. (default: '[]')
--cheribsd-mfs-root-kernel/debug-info, --cheribsd-mfs-root-kernel/no-debug-info
pass make flags for building with debug info (default: 'True')
--cheribsd-mfs-root-kernel/build-fpga-kernels, --cheribsd-mfs-root-kernel/no-build-fpga-kernels
Also build kernels for the FPGA. (default: 'False')
--cheribsd-mfs-root-kernel/default-kernel-abi {hybrid,purecap}
Select default kernel to build (default: 'hybrid')
--cheribsd-mfs-root-kernel/build-alternate-abi-kernels, --cheribsd-mfs-root-kernel/no-build-alternate-abi-kernels
Also build kernels with non-default ABI (purecap or hybrid) (default: 'True')
--cheribsd-mfs-root-kernel/build-bench-kernels, --cheribsd-mfs-root-kernel/no-build-bench-kernels
Also build benchmark kernels (default: 'False')
--cheribsd-mfs-root-kernel/caprevoke-kernel, --cheribsd-mfs-root-kernel/no-caprevoke-kernel
Build kernel with caprevoke support (experimental) (default: 'False')
Options for target 'freebsd-release':
--freebsd-release/build-tests, --freebsd-release/no-build-tests
Build the tests (default: 'True')
--freebsd-release/build-options OPTIONS
Additional make options to be passed to make when building FreeBSD/CheriBSD. See `man src.conf`
for more info. (default: '[]')
--freebsd-release/debug-info, --freebsd-release/no-debug-info
pass make flags for building with debug info (default: 'True')
--freebsd-release/subdir SUBDIRS
Only build subdirs SUBDIRS instead of the full tree. Useful for quickly rebuilding individual
programs/libraries. If more than one dir is passed, they will be processed in order. Note: This
will break if not all dependencies have been built. (default: 'the value of the global
--freebsd-subdir options')
Options for target 'cheribsd-release':
--cheribsd-release/build-tests, --cheribsd-release/no-build-tests
Build the tests (default: 'True')
--cheribsd-release/build-options OPTIONS
Additional make options to be passed to make when building FreeBSD/CheriBSD. See `man src.conf`
for more info. (default: '[]')
--cheribsd-release/debug-info, --cheribsd-release/no-debug-info
pass make flags for building with debug info (default: 'True')
--cheribsd-release/subdir SUBDIRS
Only build subdirs SUBDIRS instead of the full tree. Useful for quickly rebuilding individual
programs/libraries. If more than one dir is passed, they will be processed in order. Note: This
will break if not all dependencies have been built. (default: 'the value of the global
--freebsd-subdir options')
--cheribsd-release/build-fpga-kernels, --cheribsd-release/no-build-fpga-kernels
Also build kernels for the FPGA. (default: 'False')
--cheribsd-release/default-kernel-abi {hybrid,purecap}
Select default kernel to build (default: 'hybrid')
--cheribsd-release/build-alternate-abi-kernels, --cheribsd-release/no-build-alternate-abi-kernels
Also build kernels with non-default ABI (purecap or hybrid) (default: 'True')
--cheribsd-release/build-bench-kernels, --cheribsd-release/no-build-bench-kernels
Also build benchmark kernels (default: 'False')
--cheribsd-release/caprevoke-kernel, --cheribsd-release/no-caprevoke-kernel
Build kernel with caprevoke support (experimental) (default: 'False')
Options for target 'cheribsd-sysroot':
--cheribsd-sysroot/remote-sdk-path PATH
The path to the CHERI SDK on the remote FreeBSD machine (e.g. vica:~foo/cheri/output/sdk)
Options for target 'disk-image-minimal':
--disk-image-minimal/extra-files DIR
A directory with additional files that will be added to the image (default: '$SOURCE_ROOT/extra-
files-minimal')
--disk-image-minimal/path IMGPATH
The output path for the disk image (default: '$OUTPUT_ROOT/cheribsd-minimal-<TARGET>-disk.img
depending on architecture')
Options for target 'disk-image-mfs-root':
--disk-image-mfs-root/extra-files DIR
A directory with additional files that will be added to the image (default: '$SOURCE_ROOT/extra-
files-minimal')
--disk-image-mfs-root/path IMGPATH
The output path for the disk image (default: '$OUTPUT_ROOT/cheribsd-mfs-root-<TARGET>-disk.img
depending on architecture')
Options for target 'disk-image':
--disk-image/extra-files DIR
A directory with additional files that will be added to the image (default: '$SOURCE_ROOT/extra-
files')
--disk-image/path IMGPATH
The output path for the disk image (default: '$OUTPUT_ROOT/cheribsd-<TARGET>-disk.img depending
on architecture')
Options for target 'rootfs-tarball':
--rootfs-tarball/extra-files DIR
A directory with additional files that will be added to the image (default: '$SOURCE_ROOT/extra-
files')
--rootfs-tarball/path IMGPATH
The output path for the disk image (default: '$OUTPUT_ROOT/cheribsd-<TARGET>.tar.xz depending on
architecture')
Options for target 'disk-image-freebsd':
--disk-image-freebsd/extra-files DIR
A directory with additional files that will be added to the image (default: '$SOURCE_ROOT/extra-
files')
--disk-image-freebsd/path IMGPATH
The output path for the disk image (default: '$OUTPUT_ROOT/freebsd-<TARGET>-disk.img depending
on architecture')
Options for target 'freertos':
--freertos/demo DEMO The FreeRTOS Demo build. (default: 'RISC-V-Generic')
--freertos/prog PROG The FreeRTOS program to build. (default: 'main_blinky')
--freertos/bsp BSP The FreeRTOS BSP to build. This is only valid for the paramterized RISC-V-Generic. The BSP
option chooses platform, RISC-V arch and RISC-V abi in the $platform-$arch-$abi format. See
RISC-V-Generic/README for more details (default: 'target-dependent default')
Options for target 'run':
--run/ssh-forwarding-port PORT
The port on localhost to forward to the QEMU ssh port. You can then use `ssh root@localhost -p
$PORT` to connect to the VM (default: '<UID-dependent>')
--run/ephemeral, --run/no-ephemeral
Run qemu in 'snapshot' mode, changes to the disk image are non-persistent (default: 'False')
--run/remote-kernel-path RUN/REMOTE-KERNEL-PATH
When set rsync will be used to update the kernel image from a remote host before launching QEMU.
Useful when building and running on separate machines.
--run/alternative-kernel RUN/ALTERNATIVE-KERNEL
Select the kernel to run by specifying the kernel build configuration name.The list of available
kernel configurations is given by --list-kernels
--run/kernel-abi {hybrid,purecap}
Select extra kernel variant with the given ABI to run.
Options for target 'run-freertos':
--run-freertos/ephemeral, --run-freertos/no-ephemeral
Run qemu in 'snapshot' mode, changes to the disk image are non-persistent (default: 'False')
--run-freertos/demo DEMO
The FreeRTOS Demo to run. (default: 'RISC-V-Generic')
--run-freertos/prog PROG
The FreeRTOS program to run. (default: 'main_blinky')
--run-freertos/bsp BSP
The FreeRTOS BSP to run. This is only valid for the paramterized RISC-V-Generic. The BSP option
chooses platform, RISC-V arch and RISC-V abi in the $platform-$arch-$abi format. See RISC-V-
Generic/README for more details (default: 'target-dependent default')
Options for target 'run-minimal':
--run-minimal/ssh-forwarding-port PORT
The port on localhost to forward to the QEMU ssh port. You can then use `ssh root@localhost -p
$PORT` to connect to the VM (default: '<UID-dependent>')
--run-minimal/ephemeral, --run-minimal/no-ephemeral
Run qemu in 'snapshot' mode, changes to the disk image are non-persistent (default: 'False')
--run-minimal/remote-kernel-path RUN-MINIMAL/REMOTE-KERNEL-PATH
When set rsync will be used to update the kernel image from a remote host before launching QEMU.
Useful when building and running on separate machines.
--run-minimal/alternative-kernel RUN-MINIMAL/ALTERNATIVE-KERNEL
Select the kernel to run by specifying the kernel build configuration name.The list of available
kernel configurations is given by --list-kernels
--run-minimal/kernel-abi {hybrid,purecap}
Select extra kernel variant with the given ABI to run.
Options for target 'run-mfs-root':
--run-mfs-root/ssh-forwarding-port PORT
The port on localhost to forward to the QEMU ssh port. You can then use `ssh root@localhost -p
$PORT` to connect to the VM (default: '<UID-dependent>')
--run-mfs-root/ephemeral, --run-mfs-root/no-ephemeral
Run qemu in 'snapshot' mode, changes to the disk image are non-persistent (default: 'False')
--run-mfs-root/remote-kernel-path RUN-MFS-ROOT/REMOTE-KERNEL-PATH
When set rsync will be used to update the kernel image from a remote host before launching QEMU.
Useful when building and running on separate machines.
--run-mfs-root/alternative-kernel RUN-MFS-ROOT/ALTERNATIVE-KERNEL
Select the kernel to run by specifying the kernel build configuration name.The list of available
kernel configurations is given by --list-kernels
--run-mfs-root/kernel-abi {hybrid,purecap}
Select extra kernel variant with the given ABI to run.
Options for target 'sslproc':
--sslproc/build-tests, --sslproc/no-build-tests
Build the tests (default: 'False')
Options for target 'bash':
--bash/set-as-root-shell, --bash/no-set-as-root-shell
Set root's shell to bash (in the target rootfs) (default: 'False')
Options for target 'qtbase-dev':
--qtbase-dev/build-tests, --qtbase-dev/no-build-tests
build the Qt unit tests (default: 'True')
--qtbase-dev/build-examples, --qtbase-dev/no-build-examples
build the Qt examples (default: 'False')
--qtbase-dev/assertions, --qtbase-dev/no-assertions
Include assertions (default: 'True')
--qtbase-dev/minimal, --qtbase-dev/no-minimal
Don't build QtWidgets or QtGui, etc (default: 'True')
Options for target 'qtwebkit':
--qtwebkit/build-jsc-only, --qtwebkit/no-build-jsc-only
only build the JavaScript interpreter executable (default: 'False')
Options for target 'morello-webkit':
--morello-webkit/backend {cloop,tier1asm,tier2asm}
The JavaScript backend to use for building WebKit (default: 'cloop')
--morello-webkit/tier2ptrliterals, --morello-webkit/no-tier2ptrliterals
When true pointers are represented as atomic literals and loaded as data and when false pointers
are represented as numeric values which can be splitted and are encoded into instructions. This
option only affects the non-purecap tier2 backend. (default: 'True')
--morello-webkit/jsheapoffsets, --morello-webkit/no-jsheapoffsets
Use offsets into the JS heap for object references instead of capabilities. This option only
affects the purecap backends. (default: 'False')