A Websocket client for Unifi Controller and an example RPi based display program.
The websocket client is unifi_client.py
NEW Updated for Unifi OS device (like the UDM Pro). Unifi OS device is detected automatically. NOTE For Unifi OS devices (like UDMP), where you have to specify a port, the UDMP port is 433 (not the default 8443). You must enter this or the default 8443 will be used, and this will not work!
You can run it from the command line as an example, but mostly you would import it as a module.
unify_client.py is designed for python 3.4 and above, tested under python 3.5, but includes support for python 2.
It uses asyncio-http so you need to install aiohttp for python 3.x. You also need asyncio support.
unifi_client_3.py is the python 3 websocket client class, so it needs to be in the same directory as unifi_client.py
The Python 2 websocket uses requests and websocket-client, so you need to have both installed if you are using python 2.
unifi_client.py can also optionally publish data to an mqtt topic, for which you need paho-mqtt installed.
here is the help text:
nick@proliant:~/Scripts/Unifi-websocket-interface$ ./unifi_client.py -h
usage: unifi_client.py [-h] [-po UNIFI_PORT] [-s] [-b BROKER] [-p PORT]
[-u USER] [-uos UNIFI_OS] [-pw PASSWD] [-pt PUB_TOPIC]
[-l LOG] [-D] [-V]
IP username password
Unifi MQTT-WS Client and Data
positional arguments:
IP IP Address of Unifi Controller. (default: None)
username Unifi username. (default=None)
password unifi password. (default=None)
optional arguments:
-h, --help show this help message and exit
-po UNIFI_PORT, --unifi_port UNIFI_PORT
unifi port (default=8443)
-s, --ssl_verify Verify Certificates (Default: False)
-b BROKER, --broker BROKER
mqtt broker to publish sensor data to. (default=None)
-p PORT, --port PORT mqtt broker port (default=1883)
-u USER, --user USER mqtt broker username. (default=None)
-pw PASSWD, --passwd PASSWD
mqtt broker password. (default=None)
-pt PUB_TOPIC, --pub_topic PUB_TOPIC
topic to publish unifi data to. (default=/unifi_data/)
-l LOG, --log LOG log file. (default=None)
-D, --debug debug mode
-V, --version show program's version number and exit
You have to supply an ip (or FQDN), username and password (your Unifi login credentials), and optionally the port number (default is 8443).
Example command lines:
./unifi_client.py 192.168.x.x username password./unifi_client.py 192.168.x.x username password -Dwith debugging output so that you can see the data./unifi_client.py 192.168.x.x username password -po 8444different default unifi port./unifi_client.py 192.168.x.x username password -b 192.168.x.ypublish data to your mqtt broker at 192.168.x.y (no mqtt user or password)
NOTE The websocket client also has an api method, so you can sent api requests to the controller and get a json (ie dictionary) response when using the websocket client as well.
For example, if you define a client like this:
client = UnifiClient(username, password, IP, unifi_port, ssl_verify=False)
Then you can access the api interface by using:
data = client.api('api/system')
Where api/system is the api call to get lots of info about the UDM.
data will contain the dictionary response, or None if there was an error.
You access the websocket data by calling:
data = client.devices()
Where data is the new event data (as a list of dictionaries), received from the controller. By default this is a blocking call (use client.devices(blocking=False) if you don't want to block).
Returns a list of device updates. If blocking, waits for a new update, then returns it as a list. If not blocking, returns any updates in the queue, or a list with an empty dict if there are none
Here is an example of publishing to an mqtt broker:
import paho.mqtt.client as paho
from unifi_client import UnifiClient
import json
import logging
log = logging.getLogger('Main')
port = 1833
broker = "broker ip"
user = None #MQTT user
password = None #MQTT password
mqttc = paho.Client() #Setup MQTT
if user is not None and password is not None:
mqttc.username_pw_set(username=user,password=password)
mqttc.connect(broker, port, 120)
mqttc.loop_start()
client = UnifiClient(unifi_username, unifi_password, IP, unifi_port, ssl_verify=False) #supply Unifi controller username,password,ip,port here
while True:
data = client.devices()
log.info('got new data')
mqttc.publish(arg.pub_topic, json.dumps(data))
log.debug(json.dumps(data, indent=2))
mqttc.loop_stop()
See the bottom of unifi_client.py for the full working example.
unifi.py is an example Python 3 program using unifi_client.py to update a network status display on an RPi3 (800x600 size). It uses some obscure graphics libraries, so it's not easy to get working, but it's more of an example of how to get and use the data than anything else.
I did increase the size of the display to 1024x800 later.
To install the required graphics library for unifi.py proceed as follows:
- Download the keyring file https://github.com/ev3dev/grx/files/2824733/keyring.tar.gz
sudo cp ev3dev-archive-keyring.gpg /etc/apt/trusted.gpg.d/- follow the instructions here https://github.com/ev3dev/grx/wiki/Developing-on-Raspberry-Pi ignoring the non-existent keyring link.
NOTE You do not need console-runner, and I never got it to work anyway.
NOTE Pay attention to the bitmap fonts comment, it is required.
Here is the help text for unifi.py:
pi@raspberrypi:~/unifi $ ./unifi.py -h
usage: unifi.py [-h] [-p PORT] [-s] [-f FONT_SIZE] [-t] [-c CUSTOM] [-uos]
[-l LOG] [-D] [-li] [-S SIMULATE] [-V]
IP username password
Unifi Status Screen
positional arguments:
IP IP Address of Unifi Controller. (default: None)
username Unifi username. (default=None)
password unifi password. (default=None)
optional arguments:
-h, --help show this help message and exit
-p PORT, --port PORT unifi port (default=8443)
-s, --ssl_verify Verify Certificates (Default: False)
-f FONT_SIZE, --font_size FONT_SIZE
font size - controlls device size (default=10)
-t, --extra_text Display Extra text in APs to fill screen (Default
false)
-c CUSTOM, --custom CUSTOM
use custom layout (default=None)
-l LOG, --log LOG log file. (default=None)
-D, --debug debug mode
-li, --list list built in devices (for use in simulation)
-S SIMULATE, --simulate SIMULATE
simulate device - pass device type as argument, eg
US48P750 (default=None)
-V, --version show program's version number and exit
custom.ini allows you to specify the position and size of each item on the display. An example custom.ini file is included.
This is what it looks like (New UDMP):
NOTE Yellow text indicates that there is a fw upgrade available (white is normal).
With old USG:
Detail Screen:
Here is an example of .bashrc modifications - add to the end of the .bashrc file to run unifi.py automatically
if [ -n "$SSH_CLIENT" ] || [ -n "$SSH_TTY" ]; then
SESSION_TYPE=remote/ssh
# many other tests omitted
else
case $(ps -o comm= -p $PPID) in
sshd|*/sshd) SESSION_TYPE=remote/ssh;;
esac
fi
#export GRX_DRIVER="gw 800 gh 480 dp 300"
export GRX_DRIVER="gw 1024 gh 600 dp 300"
if [ "$SESSION_TYPE" != "remote/ssh" ]; then
cd ~/unifi
while :
do
./unifi.py 192.168.100.119 <login> <password> -c custom.ini -l unifi.log
sleep 5
done
fi
This will automatically start the monitor on boot if the pi is set to auto login to console. the export GRX_DRIVER= entry specifies the size of the screen you are using in pixels. if you exit the monitor (say by clicking on the menu), it will automatically start back up again.
If you log in via SSH, the monitor is not started.
The models.json file contains values for every uniFi device, and overrides those built into unifi.py. You can edit it manually (to tweak values I may have got wrong), or you can update it semi-automatically using a utility included here get_models.py
If you want to re-create the models.json file from scratch, just delete it, and it will be recreated from scratch when you run unifi.py (all your changes will be lost).
The models.json file must be in the same directory as the unifi.py program, and you cannot change the name. if the file does not exist, or is renamed, it will be recreated when unifi.py is run, but will only have basic information in it. Some devices, especially new devices may not display properly in this case.
The default models.json file supplied has all the UniFi controller data already added to it (this is a recommended option in get_models.py). If you recreate from scratch (as described above), this data will be lost. It can be re-added by running get_models.py as described below.
I strongly suggest making a backup of the models.json file before doing anything to it.
This is a utility program to populate the models.json file with unifi devices information. The models.json file will be re-created from scratch if it doesn't exist (if you use the -up models.json option). See above.
You need to install the following modules:
- requests
- hjson
- bs4
ie
pip3 install requests
pip3 install hjson
pip3 install bs4
Here is the help text for get_models.py:
pi@raspberrypi:~/unifi $ ./get_models.py -h
usage: get_models.py [-h] [-f FILES] [-u URL] [-U USER] [-P PASSWORD]
[-up UPDATE] [-o OUT] [-p PATTERN] [-a] [-l LOG] [-D]
[-V]
extract model info from Unifi
optional arguments:
-h, --help show this help message and exit
-f FILES, --files FILES
unifi files base location (default: /usr/lib/unifi)
-u URL, --url URL unifi url base location eg https://192.168.1.1:8443
(default: None)
-U USER, --user USER unifi controller username (default: None)
-P PASSWORD, --password PASSWORD
unifi controller password (default: None)
-up UPDATE, --update UPDATE
models file to update eg models.json (default: None)
-o OUT, --out OUT output file name (default: models_tmp.json)
-p PATTERN, --pattern PATTERN
pattern to search for (default; U7HD)
-a, --all get all matches (not just first) default: False)
-l LOG, --log LOG log file. (default: None)
-D, --debug debug mode
-V, --version show program's version number and exit
The default action is to try to retrieve model information from the controller files on your computer. I don't recommend this, the best way to use it, is to run it as follows:
./get_models.py -u https://192.168.x.x:8443 -up models.json
Where 192.168.x.x:8443 is the ip address and port of your UniFi controller. No login or password required, unless you have a UniFi OS device, in which case username and password are required.
This will retrieve the javascript from your controller, extract the model information from it, ask you some easy questions, and finally update the models.json file.
It takes a while to retrieve the javascript, as it's huge. If you want to run it multiple times without downloading the javascript all the time, add the -D option, it will be more verbose, but it will store the javascript locally in a temporary directory and doesn't delete it. The next time you run with the -D option, the local files are loaded, so it's fast. Run without the -D if you want to download again (new controller release or something).
When new devices are found in the download, you need to answer the questions, the defaults are usually correct - BUT read them carefully - they may not be! if you make a mistake, just hit ^C and run again.
One crucial question is:
Do you want to add the full Unifi data to the database (recommended)?
This adds the full data from the controller download to the models.json database. When you do this, it overrides all the default entries you just gave, and allowsunifi.py to read the port layout correctly from the controller configuration (so the ports on the devices are drawn with the correct spacing). This is a good thing! I strongly recommend you do this.
The supplied models.json file has all devices and unifi data in it (including beta devices) as of February 2020 (Controller Version 5.12.63).
Finally save the updated file Do you want to overwrite the models.json file?, there is no default answer, you have to enter y to update the file. The previous models.json file will be saved as a backup file called models.json.org you can restore in case anything goes wrong.
When you have updated the models.json file, start (or restart) unifi.py, and it will load the new database. Any new devices should now be displayed properly...
This utility is a WIP, so it might be a bit buggy. Works on my systems.
controller.py is a module that gives access to the unifi API, and can be used for simple REST access to unifi data. it's cobbled together from various sources on the web (thanks to the contributors), I just added to it, it's not my work as such.
NOTE The websocket client also has an api method, see the websocket section for details
When the client first connects, it pulls the confguration data for all your devices, so the first data hit is large, after that only updates are received from the controller. The data is in the same format as it is received, ie a list of dictionaries (received as json text). The current state is stored in the client in UnifiClient.unifi_data, which is only updated when you call UnifiClient.devices(). There are methods for accessing this data, all of which call the devices() method internally, so use the methods, rather than accessing unifi_data directly. Only sync and events methods are exposed, other types of updates (speed test and so on) are displayed in debug mode, but otherwise ignored. It would be easy to add handling for these updates though if you need them for something. Feel free to fork your own version.
All is tested on Unifi 5.12.63, with UDMP FW 1.6.5-RC3. I have various AP's (UAP-AC-XX) some Unifi Switches and a UDM Pro (was a USG 3 port - now retired).
Currently running on an RPi3, Python 3.5.3, but also works in my development environment (Ubuntu 18.04.1, Python 3.6.7).
Hope you find it useful. There is no warranty...