Skip to content

Arduino code for reading temperatures, talking to a GPS, and logging to an SD card and via XBee

Notifications You must be signed in to change notification settings

MobileSensorPlatform/arduino-code

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

31 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Arduino code for reading temperatures, talking to a GPS, and logging to an SD card and via XBee

Software prerequisites

Install Adafruit-SD, Adafruit-GPS, and Adafruit-MAX31855 libraries.

Tested with Arduino IDE 1.6.5. For Due support, go to Tools > Board > Boards Manager and install 32-bit Cortex M3 package.

Pin usage

  • USB communication with host on 0, 1 (keep open for debugging)
  • Powerboost shield: uses only 5V and GND pins.
  • Thermocouple boards (MAX31855, qty. 3)
    • CLK, MISO: on 6-pin SPI header next to Arduino logo; check pinout
    • CS: 10, 4, 52 for CS0, CS1, and CS2 respectively
  • GPS/SD logging shield
    • For GPS, switch on shield set to SoftSerial, then jumpered 7 -> 18 (TX1), 8 -> 19 (RX1)
    • For SD card, software SPI on 13-11, 9, using Adafruit SD library, initialized with SD.begin(9, 11, 12, 13)
    • Modify shield: cut trace right next to pin 10 on underside of shield. Jump pin 9 to hole labeled CS.
  • XBee shield
    • Switch set to DLINE
    • Blobs for pins 2, 3 desoldered
    • DOUT under XBee wired to: 17 (RX2)
    • DIN under XBee wired to: 16 (TX2)

Schematic

About

Arduino code for reading temperatures, talking to a GPS, and logging to an SD card and via XBee

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Other 100.0%