Add Extra ProUI features

[classicrocker883]

Description

This adds the following features to ProUI:

1. Show Mesh creation / Cancel auto bed leveling, ABL/UBL

• • While having the option to cancel and break mid operation probing, it specifically allows the probe to show the bed map being created for UBL and ABL, G29

2. Ability to change MULTIPLE_PROBING/TOTAL_PROBING through the UI (how many probes when tramming/bed leveling/creating mesh

• • You can variate how many "probes" when probing, such as for bed tramming and creating leveling mesh

3. Variable Mesh_Inset. Able to change the mesh's inset: 4 sides of Cartesian bed [X/Y] | [Min/Max]

• • You can variate the area of the mesh. Change the inset from each edge.

4. Ability to change Probe Z feedrate (subsequent slow probes) now added

5. Change the grid array - 3x3, 5x5, 9x9... (removed for future feature)

• • the only limitation I foresee for ProUI is because of the specific MeshViewer, it can only view up to 9x9, but I have another PR which allows switching between the two, once that is merged only then we can be able to allow this to go up to 10x10 even 15x15 if need. (goes with changing grid array)

6. Rearrange menu items

• • Add levelMenu + swap w/advancedSettingsMenu
• • Keep printer settings in Advanced Settings menu and move access to Control menu
• • Designate the now Level menu for Bed Leveling and mesh stuff
• • Preheat menu altered
• • Add MSG_MESH_SETTINGS "Mesh Settings"

Other Changes

Changes to Gcode Thumbnail preview.
Move struct hmiData from dwin.h to dwin_defines.h
Remove redundant headers
Changed Probe::run_z_probe to accommodate variable MULTIPLE_PROBING - for ProUI

Note

if there is one more thing I'd like to add is being able to change the Z feedrate.
MSG_Z_FEED_RATE goes unused -- not anymore
Having the grid type be 10x10 or more is something we can work on next

one more thing is a couple other changes, like the toggleCheckboxLine() now uses ^= true

• moved to other PR

Requirements

Benefits

Less clumped.
Better readability.
This goes for UI navigation.

Configurations

Related Issues

for void do_z_clearance(),
you have UNUSED(with_probe), yet it does get used...
so I change it to
IF_DISABLED(HAS_BED_PROBE, UNUSED(with_probe));
I just wanted to point this out, because it just didn't make sense, and hope this change is correct.

trying to get the bugs out of MULTIPLE_PROBING. its difficult to say which line of code to use. any advice would be helpful.

• Multiple probing should be fine, there may be hiccups with HS (High Speed) Mode enabled, but that may depend on bed probe type (3D touch vs BL touch)

---

Code Below is not relevant to this PR anymore since being able to change grid array/grid mesh points was removed.

I get this weird warning only through github actions

Marlin/src/feature/bedlevel/ubl/ubl.cpp: In static member function 'static void unified_bed_leveling::set_all_mesh_points_to_value(const_float_t)':
Marlin/src/feature/bedlevel/ubl/ubl.cpp:107:20: warning: iteration 9 invokes undefined behavior [-Waggressive-loop-optimizations]
  107 |     z_values[x][y] = value;
      |     ~~~~~~~~~~~~~~~^~~~~~~
In file included from Marlin/src/feature/bedlevel/ubl/../../../inc/MarlinConfigPre.h:49,
                 from Marlin/src/feature/bedlevel/ubl/../../../inc/MarlinConfig.h:28,
                 from Marlin/src/feature/bedlevel/ubl/ubl.cpp:23:
Marlin/src/feature/bedlevel/ubl/../../../inc/Conditionals_LCD.h:1568:96: note: within this loop
 1568 |   #define GRID_LOOP(A,B) for (uint8_t A = 0; A < GRID_MAX_POINTS_X; ++A) for (uint8_t B = 0; B < GRID_MAX_POINTS_Y; ++B)
Marlin/src/feature/bedlevel/ubl/ubl.cpp:106:3: note: in expansion of macro 'GRID_LOOP'
  106 |   GRID_LOOP(x, y) {

and also for static void unified_bed_leveling::report_current_mesh()

[thisiskeithb]

It would be nice if these kinds of features were implemented at a higher level so everyone could use them instead of a subset of LCDs/UIs.

[classicrocker883]

It would be nice if these kinds of features were implemented at a higher level so everyone could use them instead of a subset of LCDs/UIs.

I'm not so familiar with how that would be; could you point to me which file/line of those, maybe I could figure something out. I'd like to add some more to this.