owrtconfig.sh and owrtflash-ng.sh

owrtconfig

owrtconfig should be re-written; however owrtflash-ng.sh is new, as the name says.

owrtflash-ng.sh

What does it do?

owrtflash-ng.sh can be used to flash OpenWrt en mass on multiple devices nearly at once, which are connected to a client at the same switch.

The minimum config about a 'node', which have to be stated is a model and a ethernet macaddr, if it come fresh out of the box. Dissent options can specified as well, like: router_ip, firmware, user and password and so on to have various ways of flashing a device.

Features

• flash via http-, telnet[1]- or ssh-protocol over a factory-, openwrt-, or custom[2]-firmware
• network is configured with iproute2 (welcome to the future!!)
• Disable network-manger (if you are using it on your ethernet card) with a commandline argument. You do not want to have network-manager running on eth0, while using that tool!
• modular function design which is hopefully reuseable by other tools, or are at least easily enhanceable.
• node config is written in shell script, so they are just variables to set.

[1] Cause of a bug, I had to cheat a little bit, and just set the password via telnet to enable ssh, and then just flash via ssh.

[2] By custom I mean of course a OpenWrt derivat.

Example usage

# Unpack your device,
# Setup your node config file... and
# and plugin for the first time, or go ahead to the next command...
time ./owrtflash-ng.sh --nodes 0142 --from factory --to openwrt --sudo

# Now flash your own firmware over the virgin OpenWrt
time ./owrtflash-ng.sh --nodes 0142 --from openwrt --to custom --sudo

# If you want to /reset/ the device
time ./owrtflash-ng.sh --nodes 0142 --from custom --to factory --sudo

Dependencies

Please refer to _check_requirements. It is are not that much. Anyway, Bastian pointed out, if it should run under OpenWrt (or POSIX shell) as well, seq can not be used in the current form. So tests under OpenWrt have to be done

The script is developed and tested on Debian Testing (07/2015) and runned in /bin/sh aka /bin/dash.

Limits

While testing I noticed certain bugs in certain situations, ...

• There is nearly no way to ensure the flash progress worked! _flash_*_via_http like _flash_*_via_ssh give you no way to monitor the process! sshs output is moved aside to not fuckup the screen output of the tool, and sysupgrade have to be executed with a nohup functunality, to detach from the tty and the remote shell. It is planned to have some function like a ping test at the end of the flash function, which checks and monitors pings to the node. If they are up, and then go down after ~30 seconds, and came back up after ~ 30-60 secounds later, it seams like that flashing was successful and the device had rebooted. "Immerhin was..."
• After setting a password via telnet, dropbear takes it's time to restart. So _set_password_via_telnet which is a expect script, just restarts dropbear by itself. However we still have to wait...
• As a result of an unfound bug in my expect script _flash_*_via_telnet just uses _flash_*_via_ssh in the end, to simplify my life.
• Sometimes OpenWrt sucks, or my devices are overall a pit full of shit! They have problems after a power cycle, or... hehe this is funny: Once, after flashing OpenWrt over OpenWrt and rebooting, there where no files available under '/'. Yeah funny things like this, which the script can not determine, and will cause it to fail. This is robbing your nervs while testing. Most of the time there are no minor problems, but sometimes you just can't know why even...

Anyway, enough hate speech for now... now to something totaly different ...

Example directory structures

For owrtflash-ng.sh to work properly, you need a bunch of config files. The following is an example, which can be found in the git repository as well. If you want to contribute additional config files for yet unsupported devices, please get in touch with me and send me your code.

Default settings

A general overview:

./defaults/
├── factory
│   ├── tl
│   ├── tl-wr841
│   ├── tl-wr841n-v8
│   └── tl-wr841n-v9
├── generic
├── models
│   ├── tl-wr841
│   ├── tl-wr841n-v8 -> tl-wr841
│   ├── tl-wr841n-v9 -> tl-wr841
│   ├── tl-wr842nd
│   └── tl-wr842nd-v1 -> tl-wr842nd
└── openwrt

As you can see, there are default settings for...

• generic, where you will find boring stuff like the '${user_agent}' for curl,
• models, which specifys for now only the ${chipset},
• factory, which contains various configuration for the factory firmware state, like the '${router_ip}' and '${client_ip}', '${user}' and '${password}',
• openwrt, also gives you a '${user}' and '${password}', as well as a '${router_ip}' and '${client_ip}'.

These 4 config sections are loaded dynamicly and so they will overwrite some shell variables. Later you will see, that this also the way to overload functions like _flash_over_factory_via_http.

factory settings

Factory default config files contain i.e.

• router_ip
• client_ip
• user
• password
• protocol

If a model has some kind of defauls across different revisions or alike, config files shoud be reused by sourcing them from one to another.

# cat defaults/factory/tl-wr841n-v8
#!/bin/sh

. "${__basedir}"/defaults/factory/tl-wr841


# cat defaults/factory/tl-wr841
#!/bin/sh

. "${__basedir}"/defaults/factory/tl


# cat defaults/factory/tl
#!/bin/sh
# TP-Link generic factory defaults

router_ip="192.168.0.1"
client_ip="192.168.0.100"

protocol="http"
user="admin"
password="admin"

Firmware repository

Then there is a archiv or repository for firmware image files.

./firmware-images/
├── custom
├── factory
│   ├── README
│   ├── tl-wr841n-v8
│   │   ├── download_factory.sh
│   │   ├── TL-WR841ND_V8_140724
│   │   │   ├── How to upgrade TP-LINK Wireless N Router&AP(192.168.0.1 version).pdf
│   │   │   ├── wr841nv8_en_3_15_9_up_boot(140724).bin
│   │   │   └── wr841nv8_en_3_15_9_up_boot(140724).bin.stripped
│   │   └── TL-WR841ND_V8_140724.zip
│   ├── tl-wr841n-v8.bin -> ./tl-wr841n-v8/TL-WR841ND_V8_140724/wr841nv8_en_3_15_9_up_boot(140724).bin
│   ├── tl-wr841n-v8.bin.stripped -> ./tl-wr841n-v8/TL-WR841ND_V8_140724/wr841nv8_en_3_15_9_up_boot(140724).bin.stripped
│   ├── tl-wr842nd-v1
│   │   ├── download_factory.sh
│   │   ├── TL-WR842ND_V1_130322.zip
│   │   └── wr842ndv1_en_3_12_25_up_boot(130322)
│   │       ├── wr842ndv1_en_3_12_25_up_boot(130322).bin
│   │       └── wr842ndv1_en_3_12_25_up_boot(130322).bin.stripped
│   ├── tl-wr842nd-v1.bin -> ./tl-wr842nd-v1/wr842ndv1_en_3_12_25_up_boot(130322)/wr842ndv1_en_3_12_25_up_boot(130322).bin
│   └── tl-wr842nd-v1.bin.stripped -> ./tl-wr842nd-v1/wr842ndv1_en_3_12_25_up_boot(130322)/wr842ndv1_en_3_12_25_up_boot(130322).bin.stripped
└── openwrt
    ├── openwrt-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin
    ├── openwrt-ar71xx-generic-tl-wr841n-v8-squashfs-sysupgrade.bin
    ├── tl-wr841n-v8-factory.bin -> openwrt-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin
    └── tl-wr841n-v8-sysupgrade.bin -> openwrt-ar71xx-generic-tl-wr841n-v8-squashfs-sysupgrade.bin

The idea is to have just factory, openwrt, and custom as a directory structure. factory shoud be sorted by model, openwrt by release (have to be done), and under custom you put your own builds.

Flash over factory helper scripts

Model files which define a _flash_over_factory_via_http function.

./flash-over-factory
├── tl-wr841n-v8.sh
└── tl-wr842n-v1.sh

Various helper scripts

Do do, like they say...

./helper_functions/
├── flash_over_openwrt_via_telnet.exp
├── nohup.sh
└── set_passwd_via_telnet.exp

Node configuration

Here you go, and state your model and macaddr.

./nodes
├── 001
├── 002
├── 003
├── 0041
└── 0142

$ cat nodes/0142
#!/bin/sh
# 0142

model="tl-wr841n-v8"
macaddr="a0:f3:c1:05:8a:c2"

#firmware="wr841nv8_en_3_15_9_up_boot(140724).bin"

#protocol="ssh"

#router_ip="192.168.1.1"
#client_ip="192.168.1.100"
#user="root"
#admin="admin"

With these information you should hopefully be enabled to use that tool.

time ./owrtflash-ng.sh --nodes 0142 --from openwrt --to custom --sudo
2015-07-31 00:11:56 [info]  Checking for `sudo`
[sudo] password for ed:
2015-07-31 00:12:00 [info]  Checking requirements passed.
2015-07-31 00:12:00 [info]  Checking for `sudo`
2015-07-31 00:12:00 [log]   Loop over nodes '0142'.
2015-07-31 00:12:00 [log]   Next device in list: '0142'.
2015-07-31 00:12:00 [info]  *** 0142: Load node config file.
2015-07-31 00:12:00 [info]  *** 0142: Load generic defaults.
2015-07-31 00:12:00 [info]  *** 0142: Load hardware defaults for 'tl-wr841n-v8'.
2015-07-31 00:12:00 [info]  *** 0142: Load OpenWrt defaults.
2015-07-31 00:12:00 [info]  Resetting network
2015-07-31 00:12:00 [info]  *** 0142: Setting client IP to 192.168.1.100.
2015-07-31 00:12:00 [info]  *** 0142: Setting arp table entry for 192.168.1.1 to a0:f3:c1:05:8a:c2.
2015-07-31 00:12:00 [info]  *** 0142: Testing network connection to 192.168.1.1 via arping.
2015-07-31 00:12:01 [info]  *** 0142: Network status: OK
2015-07-31 00:12:01 [info]  *** 0142: Load generic defaults.
2015-07-31 00:12:01 [info]  *** 0142: Load hardware defaults for 'tl-wr841n-v8'.
2015-07-31 00:12:01 [info]  *** 0142: Load OpenWrt defaults.
2015-07-31 00:12:01 [log]   *** 0142: Setting password via `telnet`.
2015-07-31 00:12:27 [info]  *** 0142: Checking `ssh` remote shell login (Try 1/5).
2015-07-31 00:12:31 [log]   *** 0142: Checking `ssh` passed.
2015-07-31 00:12:31 [log]   *** 0142: Trying to flash with '/home/ed/src/owrtconfig/firmware-images/openwrt/tl-wr841n-v8-sysupgrade.bin'...
2015-07-31 00:12:36 [info]  *** 0142: Checking `ssh` remote shell login (Try 1/5).
2015-07-31 00:12:38 [log]   *** 0142: Checking `ssh` passed.
2015-07-31 00:12:38 [info]  *** 0142: Installing `nohup.sh` to "0142"...
2015-07-31 00:12:41 [info]  *** 0142: Copying "/home/ed/src/owrtconfig/firmware-images/openwrt/tl-wr841n-v8-sysupgrade.bin" to "0142"...
2015-07-31 00:12:48 [log]   *** 0142: Starting `sysupgrade`...
2015-07-31 00:12:48 [info]  Resetting network
2015-07-31 00:12:48 [log]   Loop over nodes finished.
2015-07-31 00:12:48 [info]  Exit

real    0m51.598s