To develop a 3D printable, Raspberry Pi based tablet. All parts (components) must be easy to obtain and readily available. It must have a battery, and it must be the primary source of power (meaning, it will charge up with a cable plugged in, but must have enough power to run without it.) It must be able to opperate perfect fine without a keyboard (meaning, everything in the user interface should work without an issue even if you dont have a keyboard and mouse plugged in.)
- SBC : Raspberry Pi version 4B+
- Display : 7 inch LCD Display (with touch)
- Power Supply : PiJuice UPS (with 5000 mAmp battery)
- Camera : Official Raspberry Pi 1080p Camera (front-facing)
- Sound & Speakers: Waveshare Audio HAT - powers 2 speakers, and 2 microphones, and provides an audio jack for headphones.
- Accelerometer: MPU-6050 Gyro/Accelerometer - to orientate the screen. (with python)
- Cooling: Fan connected to a Mosfet fan-speed controller (speed is controlled in python)
- USB: Breakout USB
- Buttons:
- Power Button
- Volume Up/Down rocker
- LEDs
- Charge
- Power and activity LED light is redirected (using nylon) to the case.
- Backplate: Bamboo wood back, with laser etched decal
- https://www.instructables.com/id/Raspberry-Pi-4B-3D-Printed-Tablet/
- https://www.hackster.io/news/innovate-asterisk-unveils-a-3d-printed-raspberry-pi-4-powered-tablet-be6d5298e047
- https://www.crackedconsole.com/2020/02/24/innovate-asterisk-unveils-a-3d-printed-raspberrypi-4-powered-tablet/
