Add Arduino GFX Library driver.

configs/ard-ardgfx-canvas-mono-notouch.h

@@ -0,0 +1,197 @@
+#ifndef _GUISLICE_CONFIG_ARD_H_
+#define _GUISLICE_CONFIG_ARD_H_
+
+// =============================================================================
+// GUIslice library (example user configuration) for:
+//   - CPU:     Arduino UNO / MEGA / etc
+//   - Display: Arduino Canvas Mono
+//   - Touch:   None
+//   - Wiring:  Custom breakout
+//              - Pinout:
+//
+//   - Example display:
+//     -
+//
+// DIRECTIONS:
+// - To use this example configuration, include in "GUIslice_config.h"
+//
+// WIRING:
+// - As this config file is designed for a breakout board, customization
+//   of the Pinout in SECTION 2 will be required to match your display.
+//
+// =============================================================================
+// - Calvin Hass
+// - https://github.com/ImpulseAdventure/GUIslice
+// =============================================================================
+//
+// The MIT License
+//
+// Copyright 2016-2020 Calvin Hass
+//
+// Permission is hereby granted, free of charge, to any person obtaining a copy
+// of this software and associated documentation files (the "Software"), to deal
+// in the Software without restriction, including without limitation the rights
+// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+// copies of the Software, and to permit persons to whom the Software is
+// furnished to do so, subject to the following conditions:
+//
+// The above copyright notice and this permission notice shall be included in
+// all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+// THE SOFTWARE.
+//
+// =============================================================================
+// \file GUIslice_config_ard.h
+
+// =============================================================================
+// User Configuration
+// - This file can be modified by the user to match the
+//   intended target configuration
+// =============================================================================
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+
+// =============================================================================
+// USER DEFINED CONFIGURATION
+// =============================================================================
+
+// -----------------------------------------------------------------------------
+// SECTION 1: Device Mode Selection
+// - The following defines the display and touch drivers
+//   and should not require modifications for this example config
+// -----------------------------------------------------------------------------
+#define DRV_DISP_ARDGFX           // Adafruit-GFX library
+#define DRV_DISP_ARDGFX_CANVAS_MONO // Adafruit ILI9341
+#define DRV_TOUCH_NONE            // No touch enabled
+
+
+// -----------------------------------------------------------------------------
+// SECTION 2: Pinout
+// -----------------------------------------------------------------------------
+
+// For shields, the following pinouts are typically hardcoded
+#define ARDGFX_PIN_CS       -1    // Display chip select
+#define ARDGFX_PIN_DC       -1    // Display SPI data/command
+#define ARDGFX_PIN_RST      -1    // Display Reset
+
+// Display interface type
+#define ARDGFX_SPI_HW       0      // Display uses SPI interface: 1=hardware 0=software
+#define ARDGFX_SPI_SPEED    0
+
+// Display interface software SPI
+// - Hardware SPI: the following definitions are unused
+// - Software SPI: the following pins need to be defined
+#define ARDGFX_PIN_MOSI     -1
+#define ARDGFX_PIN_MISO     -1
+#define ARDGFX_PIN_CLK      -1
+
+// SD Card
+#define ARDGFX_PIN_SDCS     -1     // SD card chip select (if GSLC_SD_EN=1)
+
+
+
+// -----------------------------------------------------------------------------
+// SECTION 3: Orientation
+// -----------------------------------------------------------------------------
+
+// Set Default rotation of the display
+// - Values 0,1,2,3. Rotation is clockwise
+#define GSLC_ROTATE     1
+
+// -----------------------------------------------------------------------------
+// SECTION 5: Diagnostics
+// -----------------------------------------------------------------------------
+
+// Error reporting
+// - Set DEBUG_ERR to >0 to enable error reporting via the Serial connection
+// - Enabling DEBUG_ERR increases FLASH memory consumption which may be
+//   limited on the baseline Arduino (ATmega328P) devices.
+//   - DEBUG_ERR 0 = Disable all error messaging
+//   - DEBUG_ERR 1 = Enable critical error messaging (eg. init)
+//   - DEBUG_ERR 2 = Enable verbose error messaging (eg. bad parameters, etc.)
+// - For baseline Arduino UNO, recommended to disable this after one has
+//   confirmed basic operation of the library is successful.
+#define DEBUG_ERR               1   // 1,2 to enable, 0 to disable
+
+// Debug initialization message
+// - By default, GUIslice outputs a message in DEBUG_ERR mode
+//   to indicate the initialization status, even during success.
+// - To disable the messages during successful initialization,
+//   uncomment the following line.
+//#define INIT_MSG_DISABLE
+
+// -----------------------------------------------------------------------------
+// SECTION 6: Optional Features
+// -----------------------------------------------------------------------------
+
+// Enable of optional features
+// - For memory constrained devices such as Arduino, it is best to
+//   set the following features to 0 (to disable) unless they are
+//   required.
+#define GSLC_FEATURE_COMPOUND       0   // Compound elements (eg. XSelNum)
+#define GSLC_FEATURE_XTEXTBOX_EMBED 0   // XTextbox control with embedded color
+#define GSLC_FEATURE_INPUT          0   // Keyboard / GPIO input control
+
+// Enable support for SD card
+// - Set to 1 to enable, 0 to disable
+// - Note that the inclusion of the SD library consumes considerable
+//   RAM and flash memory which could be problematic for Arduino models
+//   with limited resources.
+#define GSLC_SD_EN    0
+
+
+// =============================================================================
+// SECTION 10: INTERNAL CONFIGURATION
+// - The following settings should not require modification by users
+// =============================================================================
+
+// -----------------------------------------------------------------------------
+// Misc
+// -----------------------------------------------------------------------------
+
+// Define buffer size for loading images from SD
+// - A larger buffer will be faster but at the cost of RAM
+#define GSLC_SD_BUFFPIXEL   50
+
+// Enable support for graphics clipping (DrvSetClipRect)
+// - Note that this will impact performance of drawing graphics primitives
+#define GSLC_CLIP_EN 0
+
+// Enable for bitmap transparency and definition of color to use
+#define GSLC_BMP_TRANS_EN     1               // 1 = enabled, 0 = disabled
+#define GSLC_BMP_TRANS_RGB    0xFF,0x00,0xFF  // RGB color (default: MAGENTA)
+
+#define GSLC_USE_FLOAT        0   // 1=Use floating pt library, 0=Fixed-point lookup tables
+
+#define GSLC_DEV_TOUCH ""
+#define GSLC_USE_PROGMEM      1
+
+#define GSLC_LOCAL_STR        0   // 1=Use local strings (in element array), 0=External
+#define GSLC_LOCAL_STR_LEN    30  // Max string length of text elements
+
+// -----------------------------------------------------------------------------
+// Debug diagnostic modes
+// -----------------------------------------------------------------------------
+// - Uncomment any of the following to enable specific debug modes
+//#define DBG_LOG           // Enable debugging log output
+//#define DBG_TOUCH         // Enable debugging of touch-presses
+//#define DBG_FRAME_RATE    // Enable diagnostic frame rate reporting
+//#define DBG_DRAW_IMM      // Enable immediate rendering of drawing primitives
+//#define DBG_DRIVER        // Enable graphics driver debug reporting
+
+
+// =============================================================================
+
+#ifdef __cplusplus
+}
+#endif // __cplusplus
+#endif // _GUISLICE_CONFIG_ARD_H_