Skip to content

ESP8266 based access control firmware to run on HSBNE's Sonoff TH10 based Doors and Interlocks.

License

Notifications You must be signed in to change notification settings

HSBNE/AccessControl

 
 

Repository files navigation

AccessControl

ESP8266 based access control firmware to run on HSBNE's Sonoff TH10 based Doors and Interlocks.

Hardware Types

There's two main box builds, door and interlock. (Pictures coming)

Door contains a Sonoff TH10, a 240v to 12v cage power supply and uses a GX16 4 pin connector for serial to an external RFID reader and a GX12 to the door bolt/strike.

Interlock contains a Sonoff TH10, a 240v 20A 2Pole NO contactor, a 3.3v RFID reader and a single 20mm threaded case WS2812b led on a custom PCB that is wired into a TRRS connector on the sonoff.

More details on the hardware to come, including pictures.

Arduino Studio Setup

  1. Download and install Arduino Studio

  2. In arduino studio, open library manager (CTRL+SHIFT+I).
    Search for and install the following libraries:

  3. Follow the ESP8266 'installing with boards manager' guide linked here:
    https://github.com/esp8266/Arduino#installing-with-boards-manager

  4. Set the board type to "Generic ESP8266 Module":
    Tools>Board: "xxxxx">ESP8266 Boards>Generic ESP8266 Module

  5. Open one of the .ino files from this repository and press the 'Verify Button'. Ensure the sketch compiles successfully.

About

ESP8266 based access control firmware to run on HSBNE's Sonoff TH10 based Doors and Interlocks.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 100.0%