raveniung

Keyboard designed with ergogen, heavenly inspired by the reviung34

Setup

• Install ergogen: npm install -g ergogen
• Get footprints from ceoloide: git clone https://github.com/ceoloide/ergogen-footprints ergogen/footprints/ceoloide

Build

cd ergogen
ergogen .

Notes

Laser cutting (CR-Falcon Laser 10W)

Flux Oak Wood 3mm

• Outline and switch holes: Cut 2 times with 5mm/s 90% power
• M2 holes: Cut 2 times with 5mm/s 100% power

Measurements

With PCB as top-plate and 3mm acryl top middle plate

• Standoffs must be 6mm
• Screw from bottom M2x6mm (6.8mm total)
• Screw from top M2x4mm (4.8mm total)

With acryl as top-plate and 2mm? acryl top middle plate

• Standoffs must be 6mm
• Screw from bottom and bottom M2x6mm (6.8mm total)