Skip to content
This repository has been archived by the owner on Nov 9, 2023. It is now read-only.

Tested hardware boards

Andrea Salvatori - IU6FZL edited this page Feb 3, 2022 · 6 revisions

The list of hardware boards tested by us or the community.

Decawave DWM1000 pins diagram

a

Arduino Pro Mini 3,3V 8MHz.

Arduino DW1000
2 IRQ (if used)
10 CS
11 MOSI
12 MISO
13 CLK

NODEMCU 1.0 (ESP8266)

NodeMCU 1.0 DW1000
D5 (GPIO14) CLK
D6 (GPIO12) MISO
D7 (GPIO13) MOSI
D8 (GPIO15) CS

NODEMCU 1.0

FemtoBeacon ESP32 LPS (ESP32-PICO-D4 chip, HSPI peripheral)

FemtoBeacon DW1000
14 CLK
12 MISO
13 MOSI
18 CS (DECAWAVE)

STM32F103 'Blue Pill'

This is the guide to use Blue Pill with Arduino environment --> BluPill - Arduino

F103 DWM1000
PA4 17 - CS
PA7 18 - MOSI
PA6 19 - MISO
AP5 20 - CLK
PB5 22 - IRQ
PA0 3 - RST

Could be useful to take a look at the TREK1000 schematic diagram

STM32G431

Shield from @kromash --> https://github.com/kromash/stm32-dwm1000-shield

Teensy 4.0 & 4.1

TEENSY DWM1000 Note
10 CS
11 MOSI
12 MISO
13 CLK
2 IRQ
9 RST 10Kohm pull-down

used breakout for dwm1000.