[AI-4764] DDS: Ivanti Connect Secure Integration v1.0.0

.github/workflows/config/labeler.yml

@@ -267,6 +267,8 @@ integration/incident_io:
 - incident_io/**/*
 integration/istio:
 - istio/**/*
+integration/ivanti_connect_secure:
+- ivanti_connect_secure/**/*
 integration/jboss_wildfly:
 - jboss_wildfly/**/*
 integration/jmeter:

ivanti_connect_secure/CHANGELOG.md

@@ -0,0 +1,4 @@
+# CHANGELOG - ivanti_connect_secure
+
+<!-- towncrier release notes start -->
+

ivanti_connect_secure/README.md

@@ -0,0 +1,144 @@
+## Overview
+
+[Ivanti Connect Secure][3] gives employees, partners and customers secure and controlled access to corporate data and applications. The applications include file servers, web servers, native messaging, and hosted servers outside your trusted network.
+
+This integration parses the following types of logs:
+
+- **Web Requests** : Logs provide information about client requests to web-based resources, including successful, failed, blocked, denied, and unauthenticated requests.
+- **Authentication** : Logs provide information about login-related events, SSL negotiation failures, and remote address change events.
+- **Connection** : Logs provide information about connections, including details on bytes transferred, duration, hostname, and IP addresses.
+- **VPN Tunneling** : Logs provide information about ACL-related activity, as well as VPN session related events.
+- **Statistics** : Logs provide information into system usage, including concurrent users, and other performance metrics.
+- **Administrator Activities** : Logs provide information on actions performed by administrators, such as logins, configuration changes, and system management tasks.
+
+Visualize detailed insights into these logs through the out-of-the-box dashboards. Additionally, ready-to-use Cloud SIEM detection rules are available to help you monitor and respond to potential security threats effectively.
+
+## Setup
+
+### Installation
+
+To install the Ivanti Connect Secure integration, run the following Agent installation command and the steps below. For more information, see the [Integration Management][4] documentation.
+
+**Note**: This step is not necessary for Agent version >= 7.59.0.
+
+Linux command
+
+```shell
+sudo -u dd-agent -- datadog-agent integration install datadog-ivanti_connect_secure==1.0.0
+```
+
+### Configuration
+
+#### Log collection
+
+1. Collecting logs is disabled by default in the Datadog Agent. Enable it in the `datadog.yaml`:
+
+   ```yaml
+   logs_enabled: true
+   ```
+
+2. Add this configuration block to your `ivanti_connect_secure.d/conf.yaml` file to start collecting your logs.
+
+   See the sample [ivanti_connect_secure.d/conf.yaml][6] for available configuration options.
+
+   ```yaml
+   logs:
+     - type: <tcp/udp>
+       port: <PORT>
+       source: ivanti-connect-secure
+       service: ivanti-connect-secure
+   ```
+
+   **Note**:
+
+   - `PORT`: Port should be similar to the port provided in **Configure syslog message forwarding from Ivanti Connect Secure** section.
+   - It is recommended not to change the service and source values, as these parameters are integral to the pipeline's operation.
+
+3. [Restart the Agent][2].
+
+#### Configure syslog message forwarding from Ivanti Connect Secure
+
+1. Login in to the Ivanti Connect Secure Admin Portal.
+2. Navigate to **System** > **Log/Monitoring** > **Events**.
+3. Click the **Settings** tab.
+4. Under **Select Events to Log**, ensure all event types are selected.
+5. Click **Save Changes** to apply the configuration.
+6. Configure the syslog server details in the **Syslog Servers** section:
+   - **Server name/IP**: Enter the fully qualified domain name or IP address of the syslog server in the format `<IP/domain>:<port>`.
+   - **Type**: Select either **TCP** or **UDP** from the dropdown
+   - **Filter**: Choose **JSON: JSON** from the dropdown
+     <br>After entering the required details, click **Add**.
+7. Repeat steps 3 to 6 for the **User Access** and **Admin Access** tabs.
+
+### Validation
+
+[Run the Agent's status subcommand][5] and look for `ivanti_connect_secure` under the Checks section.
+
+## Data Collected
+
+### Log
+
+| Format | Event Types                                                                                   |
+| ------ | --------------------------------------------------------------------------------------------- |
+| JSON   | Web Requests, Authentication, Connection, VPN Tunneling, Statistics, Administrator Activities |
+
+### Metrics
+
+The Ivanti Connect Secure integration does not include any metrics.
+
+### Events
+
+The Ivanti Connect Secure integration does not include any events.
+
+### Service Checks
+
+The Ivanti Connect Secure integration does not include any service checks.
+
+## Troubleshooting
+
+**Permission denied while port binding:**
+
+If you see a **Permission denied** error while port binding in the Agent logs:
+
+1. Binding to a port number under 1024 requires elevated permissions. Grant access to the port using the `setcap` command:
+
+   ```shell
+   sudo setcap CAP_NET_BIND_SERVICE=+ep /opt/datadog-agent/bin/agent/agent
+   ```
+
+2. Verify the setup is correct by running the `getcap` command:
+
+   ```shell
+   sudo getcap /opt/datadog-agent/bin/agent/agent
+   ```
+
+   With the expected output:
+
+   ```shell
+   /opt/datadog-agent/bin/agent/agent = cap_net_bind_service+ep
+   ```
+
+   **Note**: Re-run this `setcap` command every time you upgrade the Agent.
+
+3. [Restart the Agent][2].
+
+**Data is not being collected:**
+
+Ensure traffic is bypassed from the configured port if the firewall is enabled.
+
+**Port already in use:**
+
+If you see the **Port <PORT_NUMBER> Already in Use** error, see the following instructions. The following example is for port 514:
+
+- On systems using Syslog, if the Agent listens for events on port 514, the following error can appear in the Agent logs: `Can't start UDP forwarder on port 514: listen udp :514: bind: address already in use`. This error occurs because by default, Syslog listens on port 514. To resolve this error, take **one** of the following steps:
+  - Disable Syslog.
+  - Configure the Agent to listen on a different, available port.
+
+For further assistance, contact [Datadog support][1].
+
+[1]: https://docs.datadoghq.com/help/
+[2]: https://docs.datadoghq.com/agent/guide/agent-commands/#start-stop-and-restart-the-agent
+[3]: https://www.ivanti.com/products/connect-secure-vpn
+[4]: https://docs.datadoghq.com/agent/guide/integration-management/?tab=linux#install
+[5]: https://docs.datadoghq.com/agent/guide/agent-commands/#agent-status-and-information
+[6]: https://github.com/DataDog/integrations-core/blob/master/ivanti_connect_secure/datadog_checks/ivanti_connect_secure/data/conf.yaml.example

ivanti_connect_secure/assets/configuration/spec.yaml

@@ -0,0 +1,10 @@
+name: Ivanti Connect Secure
+files:
+- name: ivanti_connect_secure.yaml
+  options:
+  - template: logs
+    example:
+    - type: tcp/udp
+      port: <PORT>
+      source: ivanti-connect-secure
+      service: ivanti-connect-secure