update

docs/NAS-setup.md

@@ -45,9 +45,10 @@ sudo blkid /dev/sda1
 ```
 sudo nano /etc/fstab
 ```
-  ```
-  UUID= /mnt/usb/raid1 ext4 defaults,auto,users,rw,nofail 0 0
-  ```
+
+```
+UUID= /mnt/usb/raid1 ext4 defaults,auto,users,rw,nofail 0 0
+```
 
 # First mount
 ```
@@ -75,14 +76,15 @@ sudo apt install -y samba samba-common
 ```
 sudo nano /etc/samba/smb.conf
 ```
-  ```
-  [raid1]
-  path = /mnt/raid1/
-  writeable = yes
-  create mask = 0775
-  directory mask = 0775
-  public=no
-  ```
+
+```
+[raid1]
+path = /mnt/raid1/
+writeable = yes
+create mask = 0775
+directory mask = 0775
+public=no
+```
 
 # Add pi password
 ```
@@ -101,9 +103,27 @@ Enable quirks mode (seems to help) over using UAS mode:
 ```
 sudo nano /boot/cmdline.txt
 ```
-  ```
-  usb-storage.quirks=aaaa:bbbb:u
-  ```
 
-Where `aaaa` is the `idVendor` for your device and `bbbb` is the `idProduct`,
-added to the start of the file.
+```
+usb-storage.quirks=aaaa:bbbb:u
+```
+
+Where `aaaa` is the `idVendor` for your device and `bbbb` is the `idProduct`, added to the start of the file. These are found in `dmesg` when the drive is plugged in with the USB > SSD cable:
+
+```
+[    2.488234] usb 2-2.3: new SuperSpeed USB device number 3 using xhci_hcd
+[    2.513780] usb 2-2.3: New USB device found, idVendor=174c, idProduct=1153, bcdDevice= 1.00
+[    2.513839] usb 2-2.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
+[    2.513868] usb 2-2.3: Product: Ugreen Storage Device
+[    2.513891] usb 2-2.3: Manufacturer: Ugreen
+[    2.513912] usb 2-2.3: SerialNumber: 26A1EE833C9C
+```
+
+Quirks mode can be confirmed with `dmesg | grep usb-storage`:
+
+```
+[    2.517433] usb 2-2.3: UAS is ignored for this device, using usb-storage instead
+[    2.517588] usb 2-2.3: UAS is ignored for this device, using usb-storage instead
+[    2.517619] usb-storage 2-2.3:1.0: USB Mass Storage device detected
+[    2.518212] usb-storage 2-2.3:1.0: Quirks match for vid 174c pid 1153: 800000
+```