diff --git a/resources/Translations/xToolsCore_en.ts b/resources/Translations/xToolsCore_en.ts index 825ff6f9..c5867900 100644 --- a/resources/Translations/xToolsCore_en.ts +++ b/resources/Translations/xToolsCore_en.ts @@ -1,3239 +1,3204 @@ - - - - - AbstractModelUi - - - Form - - - - - Add - - - - - Clear - - - - - Delete - - - - - Disable all items - - - - - Import - - - - - Export - - - - - AsciiAssistant - - - Filter - - - - - Preserve case - - - - - Bin - - - - - Oct - - - - - Dec - - - - - Hex - - - - - Description - - - - - NUL (NULL) - - - - - SOH (Start Of Headling) - - - - - STX (Start Of Text) - - - - - ETX (End Of Text) - - - - - EOT (End Of Transmission) - - - - - ENQ (Enquiry) - - - - - ACK (Acknowledge) - - - - - BEL (Bell) - - - - - BS (Backspace) - - - - - HT (Horizontal Tab) - - - - - LF/NL(Line Feed/New Line) - - - - - VT (Vertical Tab) - - - - - FF/NP (Form Feed/New Page) - - - - - CR (Carriage Return) - - - - - SO (Shift Out) - - - - - SI (Shift In) - - - - - DLE (Data Link Escape) - - - - - DC1/XON(Device Control 1/Transmission On) - - - - - DC2 (Device Control 2) - - - - - DC3/XOFF(Device Control 3/Transmission Off) - - - - - DC4 (Device Control 4) - - - - - NAK (Negative Acknowledge) - - - - - SYN (Synchronous Idle) - - - - - ETB (End of Transmission Block) - - - - - CAN (Cancel) - - - - - EM (End of Medium) - - - - - SUB (Substitute) - - - - - ESC (Escape) - - - - - FS (File Separator) - - - - - GS (Group Separator) - - - - - RS (Record Separator) - - - - - US (Unit Separator) - - - - - (Space) - - - - - DEL (Delete) - - - - - AssistantFactory - - - CRC Assistant - - - - - mDNS Assistant - - - - - Ping Assistant - - - - - ASCII Assistant - - - - - Base64 Assistant - - - - - Number Assistant - - - - - String Assistant - - - - - Broadcast Assistant - - - - - File Check Assistant - - - - - File Merge Assistant - - - - - QR Code Assistant - - - - - CAN Bus Assistant - - - - - Modbus Assistant - - - - - Base64Assistant - - - Base64 Assistant - - - - - Plaintext - - - - - Ciphertext - - - - - Image - - - - - Decrypt - - - - - Encrypt - - - - - Data error - - - - - Data can not convert image. - - - - - BleCentralUi - - - Form - - - - - Characteristic - - - - - (Unsupported characteristic) - - - - - BLE Devices - - - - - Scan - - - - - Notify - - - - - Read - - - - - Service scanning - - - - - Write mode - - - - - Service - - - - - Device scanning - - - - - BroadcastAssistant - - - Output control - - - - - Output format - - - - - Clear - - - - - Broadcast parameters - - - - - Broadcast address - - - - - 55443 - - - - - Data format - - - - - Broadcast prefix - - - - - Broadcast interval - - - - - Broadcast suffix - - - - - Broadcast port - - - - - Broadcast data - - - - - - Broadcast - - - - - Information output - - - - - Broadcast Assistant - - - - - Terminate - - - - - CanBusAssistant - - - CANBus Studio - - - - - CAN Frame - - - - - Extended format - - - - - Flexible data rate - - - - - Frame ID - - - - - Frame type - - - - - Frame options - - - - - Bitrate switch - - - - - Device Control - - - - - Disconnect - - - - - Connect - - - - - Plugin - - - - - Name - - - - - Data View - - - - - Specify Configuration - - - - - Error filter - - - - - Custom configurations - - - - - CAN FD - - - - - Loopback - - - - - Data bitrate - - - - - Bitrate - - - - - Receive own - - - - - CAN Frame Payload - - - - - Send - - - - - can0 - - - - - DataFrame - - - - - ErrorFrame - - - - - RemoteRequestFrame - - - - - Hex - - - - - Interface Name is Empty - - - - - Interface name is empty, please input the name then try again! - - - - - Create device failed! - - - - - Error Occurred - - - - - Connection Error - - - - - Connection error: %1 - - - - - Device is Not Ready - - - - - Device is not ready, please connect the device then try angin! - - - - - Error Occure - - - - - unspecified - - - - - false - - - - - true - - - - - ChartsTestUi - - - Format - - - - - Channels - - - - - ChartsUiSettings - - - Clear - - - - - Export - - - - - Import - - - - - Data type - - - - - Legend - - - - - Cache points - - - - - CommunicationSettings - - - Save tx data - - - - - Browser - - - - - Save Date - - - - - - Save to file - - - - - Save millisecond - - - - - Save rx data - - - - - Save Time - - - - - Save format - - - - - Max bytes - - - - - Text File(*.txt) - - - - - CrcAssistant - - - CRC Assistant - - - - - Paloy value - - - - - Initial value - - - - - - Copy - - - - - More information about crc calculation, visit http://www.ip33.com/crc.html(double clicked to visit) - - - - - Input reversal - - - - - Output reversal - - - - - Clear - - - - - Calculate - - - - - Parameters - - - - - XOR value - - - - - Height its is on the left and the low bits is on the right - - - - - HEX - - - - - ASCII - - - - - Result(HEX) - - - - - Parameter model - - - - - Width - - - - - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> -<html><head><meta name="qrichtext" content="1" /><meta charset="utf-8" /><style type="text/css"> -p, li { white-space: pre-wrap; } -hr { height: 1px; border-width: 0; } -li.unchecked::marker { content: "\2610"; } -li.checked::marker { content: "\2612"; } -</style></head><body style=" font-family:'Microsoft YaHei UI'; font-size:9pt; font-weight:400; font-style:normal;"> -<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'SimSun';"><br /></p></body></html> - - - - - Paloy - - - - - Input data - - - - - Result(BIN) - - - - - FileCheckAssistant - - - Form - - - - - Upper result - - - - - Checked file - - - - - Checked progress - - - - - Checked algorithm - - - - - Checked result - - - - - - Calculate - - - - - Open - - - - - File Check Assistant - - - - - Remaining time - - - - - StopCalculating - - - - - FileMergeAssistant - - - Form - - - - - File list - - - - - Import - - - - - Up - - - - - Down - - - - - Remove - - - - - Clear - - - - - Merge - - - - - Import Files - - - - - - Bin file(*.bin);;All file(*) - - - - - Open File Failed - - - - - Open file(%1) failed: - - - - - - Merge Files - - - - - No file to merge, please import files first. - - - - - Save Files - - - - - Merge files successfully. - - - - - HashCalculator - - - Calculating finished - - - - - IOPage - - - Output control - - - - - - Text format - - - - - - - Settings - - - - - - Open - - - - - Cycle interval - - - - - Input control - - - - - Send - - - - - Communication control - - - - - Rx - - - - - Tx - - - - - Date - - - - - Flag - - - - - Time - - - - - Ms - - - - - Clear - - - - - IO - - - - - Output - - - - - Input - - - - - 📄 - - - - - Presets - - - - - Emitter - - - - - Responder - - - - - Transfers - - - - - Disable - - - - - Serial Port - - - - - UDP Client - - - - - UDP Server - - - - - TCP Client - - - - - TCP Server - - - - - WebSocket Client - - - - - WebSocket Server - - - - - Close - - - - - Error Occurred - - - - - Warning - - - - - [%1][%2][%3][%4] - - - - - InputSettings - - - Show data preview - - - - - Append prefix - - - - - Append suffix - - - - - Escape character - - - - - CRC end index - - - - - CRC start index - - - - - CRC arithmetic - - - - - Append CRC - - - - - Big endian - - - - - MainWindow - - - New Window - - - - - Save Parameters - - - - - - Import Parameters - - - - - - Export Parameters - - - - - &Tools - - - - - New - - - - - Use System Proxy - - - - - Exit to System Tray - - - - - &View - - - - - Bug from Store - - - - - Third Party Open Source - - - - - Get Sources from Github - - - - - Get Sources from Gitee - - - - - - Release History - - - - - Join in QQ Group - - - - - Links - - - - - QR Code - - - - - User QQ Group - - - - - Qt QQ Group - - - - - - Json Files (*.json) - - - - - MdnsAssistant - - - Service type - - - - - - Start - - - - - Error occurred - - - - - Service type can not be empty, please input then try again. - - - - - Type - - - - - Hostname - - - - - Port - - - - - Attributes - - - - - Stop - - - - - ModbusAssistant - - - Device Operations - - - - - Device list - - - - - Close - - - - - Open - - - - - Console - - - - - Client Registers - - - - - Custom Protocol Data Unit - - - - - Send - - - - - Server Register - - - - - Network Settings - - - - - - Address - - - - - Port - - - - - Start address - - - - - Target address - - - - - Timeout - - - - - Address number - - - - - Read - - - - - Write - - - - - Repeat times - - - - - Client Parameters - - - - - Input Control(address and value) - - - - - Input format - - - - - Function code - - - - - Serial Port Settings - - - - - Data bits - - - - - Port name - - - - - Baud rate - - - - - Stop bits - - - - - Parity - - - - - Server Parameters - - - - - Server address - - - - - Listen only mode - - - - - Device busy - - - - - RtuClient - - - - - RtuServer - - - - - TcpClient - - - - - TcpServer - - - - - NoParity - - - - - EvenParity - - - - - OddParity - - - - - SpaceParity - - - - - MarkParity - - - - - 0x01-ReadCoils - - - - - 0x02-ReadDiscreteInputs - - - - - 0x03-ReadHoldingRegisters - - - - - 0x04-ReadInputRegisters - - - - - 0x05-WriteSingleCoil - - - - - 0x06-WriteSingleRegister - - - - - 0x0f-WriteMultipleCoils - - - - - 0x10-WriteMultipleRegisters - - - - - Coils - - - - - DiscreteInputs - - - - - InputRegisters - - - - - HoldingRegisters - - - - - - Error occured - - - - - Can not open device: %1.Please check the parameters and try again! - - - - - Can not open device - - - - - Value - - - - - Description - - - - - Device is not Ready - - - - - The modbus device is not ready, please check settings and try again later! - - - - - ModbusFactory - - - RTU Client - - - - - RTU Server - - - - - TCP Client - - - - - TCP Server - - - - - NumberAssistant - - - Raw data - - - - - Cooked data(Hex) - - - - - Cooked data type - - - - - Cooked data(Dec) - - - - - Such as: 1, -1, 1.1, -1.1 - - - - - Cooked data(Bin) - - - - - From left to right is high to low - - - - - OutputSettings - - - Enable highlighter - - - - - Filter text - - - - - Hello,Word - - - - - Show statistician - - - - - Enable filter - - - - - PingAssistant - - - Total: --, Active: --, Finished: --, Remain: -- - - - - - Target Address - - - - - Online Status - - - - - Comparing - - - - - Host Name - - - - - Start scan - - - - - Pause scan - - - - - Stop scan - - - - - Start address - - - - - End address - - - - - Timeout(S) - - - - - Show all - - - - - Show online - - - - - - - IP Error - - - - - IP settings error, the start ip and end ip must be set, please check and try again. - - - - - IP settings error, the start ip and end ip must be in the same network segment, please check and try again. - - - - - IP settings error, the start ip must be less than the end ip, please check and try again. - - - - - Total：%1，Active：%2，Finished：%3，Remain：%4 - - - - - Scanning - - - - - Online - - - - - Offline - - - - - Scanning Finished - - - - - Scanning finished, you can screen out the result by the toolbar. - - - - - QObject - - - Critical Error - - - - - The application has been crashed, clear settings file(all settings data of the application will be clear!) and reboot the application? - - - - - (Store) - - - - - Neet to Reboot - - - - - The operation need to reboot to effectived, reboot the applicaion now? - - - - - Unknown - - - - - Serial Port - - - - - BLE Central - - - - - BLE Peripheral - - - - - UDP Client - - - - - UDP Server - - - - - TCP Client - - - - - TCP Server - - - - - WebSocket Client - - - - - WebSocket Server - - - - - Charts Test - - - - - Binary - - - - - Octal - - - - - Decimal - - - - - Hexadecimal - - - - - ASCII - - - - - UTF-8 - - - - - - None - - - - - QRCodeAssistant - - - Export - - - - - Generate - - - - - Warning - - - - - Please input the data to generate QR code. - - - - - Save QR Code Image - - - - - PNG Images (*.png);;JPG Images (*.jpg) - - - - - SerialPortUi - - - Parity - - - - - Port name - - - - - Baud rate - - - - - Stop bits - - - - - Data bits - - - - - Flow control - - - - - SocketUi - - - Client IP - - - - - Client port - - - - - Server IP - - - - - Server port - - - - - Write to - - - - - Disconnect all clients - - - - - Enable multicast - - - - - Just multicast - - - - - Channel - - - - - Multicast IP - - - - - Authentication - - - - - Multicast Port - - - - - User name - - - - - Password - - - - - StatisticianUi - - - Form - - - - - StringAssistant - - - Raw data - - - - - Input format - - - - - Cooked data - - - - - Output format - - - - - Create - - - - - SystemTrayIcon - - - xTools - - - - - Open main window - - - - - Exit program - - - - - TextItemEditor - - - Data Editor - - - - - Cancel - - - - - OK - - - - - Preprocessing - - - - - Prefix - - - - - Suffix - - - - - Escape character - - - - - CRC - - - - - Algorithm - - - - - Start index - - - - - End index - - - - - Append - - - - - Big endian - - - - - Payload - - - - - Format - - - - - xTools::AbstractModelUi - - - Clear - - - - - Are you sure to clear all items? - - - - - No Item be Selected - - - - - Please select a item first! - - - - - - Import data - - - - - - JSON (*.json);;All (*) - - - - - xTools::AbstractTransferModel - - - Transfer %1 - - - - - xTools::Application - - - Initialize application... - - - - - System - - - - - Round up for .5 and above - - - - - Always round up - - - - - Always round down - - - - - Round up for .75 and above - - - - - Don't round - - - - - Reboot application to effective - - - - - Need to reboot, reboot to effective now? - - - - - xTools::BleCentral - - - Characteristic does not support write - - - - - Characteristic does not support write without response - - - - - xTools::BleCentralUi - - - Stop - - - - - Scan - - - - - Error Occurred - - - - - Disnotify - - - - - Notify - - - - - With Response - - - - - Without Response - - - - - (No name) - - - - - xTools::ChartsTest - - - ChartsTest - - - - - xTools::ChartsUi - - - Import Data from Excel - - - - - Export Data to Excel - - - - - xTools::ChartsUiSettings - - - - Binary - - - - - - Text - - - - - - Channel - - - - - Visible - - - - - Type - - - - - Color - - - - - Name - - - - - Line - - - - - Spline - - - - - Scatter - - - - - xTools::EmitterModel - - - - Enable - - - - - Disable - - - - - Demo - - - - - Description - - - - - Interval - - - - - Data - - - - - xTools::MainWindow - - - &File - - - - - Exit Application - - - - - &Options - - - - - &Languages - - - - - &Help - - - - - About Qt - - - - - Screenshot - - - - - Application Style - - - - - Settings - - - - - Clear Settings - - - - - Open Settings Directory - - - - - HDPI Policy - - - - - Color Scheme - - - - - System - - - - - Dark - - - - - Light - - - - - (A Part of xTools Project) - - - - - - Commit - - - - - Build Date - - - - - All rights reserved. - - - - - - About - - - - - QR Code - - - - - User QQ Group - - - - - Qt QQ Group - - - - - xTools::Preset - - - Demo - - - - - Description - - - - - Data - - - - - xTools::PresetModel - - - Demo - - - - - Description - - - - - Data - - - - - xTools::ResponderModel - - - - Enable - - - - - Disable - - - - - Demo - - - - - Description - - - - - Option - - - - - Delay - - - - - Reference Data - - - - - Response Data - - - - - xTools::SerialPort - - - Failed to open serial port: %1 - - - - - xTools::SerialPortTransferModel - - - 1 - - - - - 1.5 - - - - - 2 - - - - - Odd - - - - - Even - - - - - Mark - - - - - Space - - - - - - None - - - - - Hardware - - - - - Software - - - - - Transfer Option - - - - - Port Name - - - - - Baud Rate - - - - - Data Bits - - - - - Stop Bits - - - - - Parity - - - - - Flow Control - - - - - Description - - - - - xTools::SocketTransferModel - - - Enable - - - - - Disable - - - - - Transfer Option - - - - - Client Address - - - - - Client Port - - - - - Server Address - - - - - Server Port - - - - - Data Channel - - - - - Authentication - - - - - Username - - - - - Password - - - - - Description - - - - - xTools::SocketUi - - - All clients - - - - - xTools::StatisticianUi - - - %1 frames, %2 bytes, %3B/s - - - - - xTools::StyleSheetManager - - - Dark Amber - - - - - Dark Blue - - - - - Dark Cyan - - - - - Dark Light Green - - - - - Dark Pink - - - - - Dark Purple - - - - - Dark Red - - - - - Dark Teal - - - - - Dark Yellow - - - - - Light Amber - - - - - Light Blue - - - - - Light Cyan - - - - - Light Cyan(500) - - - - - Light Light Green - - - - - Light Pink - - - - - Light Purple - - - - - Light Red - - - - - Light Teal - - - - - Light Yellow - - - - - Enable Stylesheet - - - - - Application Stylesheet - - - - - Warning - - - - - Please enable stylesheet first! - - - - - xTools::xIO - - - - - Text - - - - - - - Binary - - - - - Echo - - - - - Always - - - - - Input Equal Reference - - - - - Input Contain Reference - - - - - Input Does not Contain Reference - - - - - - None - - - - - Even - - - - - Odd - - - - - Space - - - - - Mark - - - - - RTS/CTS - - - - - X-ON/X-OFF - - - - - Hardware - - - - - Software - - - - - Disabled - - - - - Bidirectional - - - - - Unidirectional - - - - + + + + + AbstractModelUi + + + Form + + + + + Add + + + + + Clear + + + + + Delete + + + + + Disable all items + + + + + Import + + + + + Export + + + + + AsciiAssistant + + + Filter + + + + + Preserve case + + + + + Bin + + + + + Oct + + + + + Dec + + + + + Hex + + + + + Description + + + + + NUL (NULL) + + + + + SOH (Start Of Headling) + + + + + STX (Start Of Text) + + + + + ETX (End Of Text) + + + + + EOT (End Of Transmission) + + + + + ENQ (Enquiry) + + + + + ACK (Acknowledge) + + + + + BEL (Bell) + + + + + BS (Backspace) + + + + + HT (Horizontal Tab) + + + + + LF/NL(Line Feed/New Line) + + + + + VT (Vertical Tab) + + + + + FF/NP (Form Feed/New Page) + + + + + CR (Carriage Return) + + + + + SO (Shift Out) + + + + + SI (Shift In) + + + + + DLE (Data Link Escape) + + + + + DC1/XON(Device Control 1/Transmission On) + + + + + DC2 (Device Control 2) + + + + + DC3/XOFF(Device Control 3/Transmission Off) + + + + + DC4 (Device Control 4) + + + + + NAK (Negative Acknowledge) + + + + + SYN (Synchronous Idle) + + + + + ETB (End of Transmission Block) + + + + + CAN (Cancel) + + + + + EM (End of Medium) + + + + + SUB (Substitute) + + + + + ESC (Escape) + + + + + FS (File Separator) + + + + + GS (Group Separator) + + + + + RS (Record Separator) + + + + + US (Unit Separator) + + + + + (Space) + + + + + DEL (Delete) + + + + + AssistantFactory + + + CRC Assistant + + + + + mDNS Assistant + + + + + Ping Assistant + + + + + ASCII Assistant + + + + + Base64 Assistant + + + + + Number Assistant + + + + + String Assistant + + + + + Broadcast Assistant + + + + + File Check Assistant + + + + + File Merge Assistant + + + + + QR Code Assistant + + + + + CAN Bus Assistant + + + + + Modbus Assistant + + + + + Base64Assistant + + + Base64 Assistant + + + + + Plaintext + + + + + Ciphertext + + + + + Image + + + + + Decrypt + + + + + Encrypt + + + + + Data error + + + + + Data can not convert image. + + + + + BleCentralUi + + + Form + + + + + Characteristic + + + + + (Unsupported characteristic) + + + + + BLE Devices + + + + + Scan + + + + + Notify + + + + + Read + + + + + Service scanning + + + + + Write mode + + + + + Service + + + + + Device scanning + + + + + BroadcastAssistant + + + Output control + + + + + Output format + + + + + Clear + + + + + Broadcast parameters + + + + + Broadcast address + + + + + 55443 + + + + + Data format + + + + + Broadcast prefix + + + + + Broadcast interval + + + + + Broadcast suffix + + + + + Broadcast port + + + + + Broadcast data + + + + + + Broadcast + + + + + Information output + + + + + Broadcast Assistant + + + + + Terminate + + + + + CanBusAssistant + + + CANBus Studio + + + + + CAN Frame + + + + + Extended format + + + + + Flexible data rate + + + + + Frame ID + + + + + Frame type + + + + + Frame options + + + + + Bitrate switch + + + + + Device Control + + + + + Disconnect + + + + + Connect + + + + + Plugin + + + + + Name + + + + + Data View + + + + + Specify Configuration + + + + + Error filter + + + + + Custom configurations + + + + + CAN FD + + + + + Loopback + + + + + Data bitrate + + + + + Bitrate + + + + + Receive own + + + + + CAN Frame Payload + + + + + Send + + + + + can0 + + + + + DataFrame + + + + + ErrorFrame + + + + + RemoteRequestFrame + + + + + Hex + + + + + Interface Name is Empty + + + + + Interface name is empty, please input the name then try again! + + + + + Error Occurred + + + + + Connection Error + + + + + Connection error: %1 + + + + + Device is Not Ready + + + + + Device is not ready, please connect the device then try angin! + + + + + Error Occure + + + + + unspecified + + + + + false + + + + + true + + + + + ChartsTestUi + + + Format + + + + + Channels + + + + + ChartsUiSettings + + + Clear + + + + + Export + + + + + Import + + + + + Data type + + + + + Legend + + + + + Cache points + + + + + CommunicationSettings + + + Save tx data + + + + + Browser + + + + + Save Date + + + + + + Save to file + + + + + Save millisecond + + + + + Save rx data + + + + + Save Time + + + + + Save format + + + + + Max bytes + + + + + Text File(*.txt) + + + + + CrcAssistant + + + CRC Assistant + + + + + Paloy value + + + + + Initial value + + + + + + Copy + + + + + More information about crc calculation, visit http://www.ip33.com/crc.html(double clicked to visit) + + + + + Input reversal + + + + + Output reversal + + + + + Clear + + + + + Calculate + + + + + Parameters + + + + + XOR value + + + + + Height its is on the left and the low bits is on the right + + + + + HEX + + + + + ASCII + + + + + Result(HEX) + + + + + Parameter model + + + + + Width + + + + + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><meta charset="utf-8" /><style type="text/css"> +p, li { white-space: pre-wrap; } +hr { height: 1px; border-width: 0; } +li.unchecked::marker { content: "\2610"; } +li.checked::marker { content: "\2612"; } +</style></head><body style=" font-family:'Microsoft YaHei UI'; font-size:9pt; font-weight:400; font-style:normal;"> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'SimSun';"><br /></p></body></html> + + + + + Paloy + + + + + Input data + + + + + Result(BIN) + + + + + FileCheckAssistant + + + Form + + + + + Upper result + + + + + Checked file + + + + + Checked progress + + + + + Checked algorithm + + + + + Checked result + + + + + + Calculate + + + + + Open + + + + + File Check Assistant + + + + + Remaining time + + + + + StopCalculating + + + + + FileMergeAssistant + + + Form + + + + + File list + + + + + Import + + + + + Up + + + + + Down + + + + + Remove + + + + + Clear + + + + + Merge + + + + + Import Files + + + + + + Bin file(*.bin);;All file(*) + + + + + Open File Failed + + + + + Open file(%1) failed: + + + + + + Merge Files + + + + + No file to merge, please import files first. + + + + + Save Files + + + + + Merge files successfully. + + + + + HashCalculator + + + Calculating finished + + + + + IOPage + + + Output control + + + + + + Text format + + + + + + + Settings + + + + + + Open + + + + + Cycle interval + + + + + Input control + + + + + Send + + + + + Communication control + + + + + Rx + + + + + Tx + + + + + Date + + + + + Flag + + + + + Time + + + + + Ms + + + + + Clear + + + + + IO + + + + + Output + + + + + Input + + + + + 📄 + + + + + Presets + + + + + Emitter + + + + + Responder + + + + + Transfers + + + + + Disable + + + + + Serial Port + + + + + UDP Client + + + + + UDP Server + + + + + TCP Client + + + + + TCP Server + + + + + WebSocket Client + + + + + WebSocket Server + + + + + Close + + + + + Error Occurred + + + + + Warning + + + + + [%1][%2][%3][%4] + + + + + InputSettings + + + Show data preview + + + + + Append prefix + + + + + Append suffix + + + + + Escape character + + + + + CRC end index + + + + + CRC start index + + + + + CRC arithmetic + + + + + Append CRC + + + + + Big endian + + + + + MainWindow + + + New Window + + + + + Save Parameters + + + + + + Import Parameters + + + + + + Export Parameters + + + + + &Tools + + + + + New + + + + + Use System Proxy + + + + + Exit to System Tray + + + + + &View + + + + + Bug from Store + + + + + Third Party Open Source + + + + + Get Sources from Github + + + + + Get Sources from Gitee + + + + + + Release History + + + + + Join in QQ Group + + + + + Links + + + + + QR Code + + + + + User QQ Group + + + + + Qt QQ Group + + + + + + Json Files (*.json) + + + + + MdnsAssistant + + + Service type + + + + + + Start + + + + + Error occurred + + + + + Service type can not be empty, please input then try again. + + + + + Type + + + + + Hostname + + + + + Port + + + + + Attributes + + + + + Stop + + + + + ModbusAssistant + + + Device Operations + + + + + Device list + + + + + Close + + + + + Open + + + + + Console + + + + + Client Registers + + + + + Custom Protocol Data Unit + + + + + Send + + + + + Server Register + + + + + Network Settings + + + + + + Address + + + + + Port + + + + + Start address + + + + + Target address + + + + + Timeout + + + + + Address number + + + + + Read + + + + + Write + + + + + Repeat times + + + + + Client Parameters + + + + + Input Control(address and value) + + + + + Input format + + + + + Function code + + + + + Serial Port Settings + + + + + Data bits + + + + + Port name + + + + + Baud rate + + + + + Stop bits + + + + + Parity + + + + + Server Parameters + + + + + Server address + + + + + Listen only mode + + + + + Device busy + + + + + RtuClient + + + + + RtuServer + + + + + TcpClient + + + + + TcpServer + + + + + NoParity + + + + + EvenParity + + + + + OddParity + + + + + SpaceParity + + + + + MarkParity + + + + + 0x01-ReadCoils + + + + + 0x02-ReadDiscreteInputs + + + + + 0x03-ReadHoldingRegisters + + + + + 0x04-ReadInputRegisters + + + + + 0x05-WriteSingleCoil + + + + + 0x06-WriteSingleRegister + + + + + 0x0f-WriteMultipleCoils + + + + + 0x10-WriteMultipleRegisters + + + + + Coils + + + + + DiscreteInputs + + + + + InputRegisters + + + + + HoldingRegisters + + + + + + Error occured + + + + + Can not open device: %1.Please check the parameters and try again! + + + + + Can not open device + + + + + Value + + + + + Description + + + + + Device is not Ready + + + + + The modbus device is not ready, please check settings and try again later! + + + + + ModbusFactory + + + RTU Client + + + + + RTU Server + + + + + TCP Client + + + + + TCP Server + + + + + NumberAssistant + + + Raw data + + + + + Cooked data(Hex) + + + + + Cooked data type + + + + + Cooked data(Dec) + + + + + Such as: 1, -1, 1.1, -1.1 + + + + + Cooked data(Bin) + + + + + From left to right is high to low + + + + + OutputSettings + + + Enable highlighter + + + + + Filter text + + + + + Hello,Word + + + + + Show statistician + + + + + Enable filter + + + + + PingAssistant + + + Total: --, Active: --, Finished: --, Remain: -- + + + + + Target Address + + + + + Online Status + + + + + Comparing + + + + + Host Name + + + + + Start scan + + + + + Pause scan + + + + + Stop scan + + + + + Start address + + + + + End address + + + + + Timeout(S) + + + + + Show all + + + + + Show online + + + + + + + IP Error + + + + + IP settings error, the start ip and end ip must be set, please check and try again. + + + + + IP settings error, the start ip and end ip must be in the same network segment, please check and try again. + + + + + IP settings error, the start ip must be less than the end ip, please check and try again. + + + + + Total：%1，Active：%2，Finished：%3，Remain：%4 + + + + + Scanning + + + + + Online + + + + + Offline + + + + + Scanning Finished + + + + + Scanning finished, you can screen out the result by the toolbar. + + + + + QObject + + + Unknown + + + + + Serial Port + + + + + BLE Central + + + + + BLE Peripheral + + + + + UDP Client + + + + + UDP Server + + + + + TCP Client + + + + + TCP Server + + + + + WebSocket Client + + + + + WebSocket Server + + + + + Charts Test + + + + + Binary + + + + + Octal + + + + + Decimal + + + + + Hexadecimal + + + + + ASCII + + + + + UTF-8 + + + + + + None + + + + + QRCodeAssistant + + + Export + + + + + Generate + + + + + Warning + + + + + Please input the data to generate QR code. + + + + + Save QR Code Image + + + + + PNG Images (*.png);;JPG Images (*.jpg) + + + + + SerialPortUi + + + Parity + + + + + Port name + + + + + Baud rate + + + + + Stop bits + + + + + Data bits + + + + + Flow control + + + + + SocketUi + + + Client IP + + + + + Client port + + + + + Server IP + + + + + Server port + + + + + Write to + + + + + Disconnect all clients + + + + + Enable multicast + + + + + Just multicast + + + + + Channel + + + + + Multicast IP + + + + + Authentication + + + + + Multicast Port + + + + + User name + + + + + Password + + + + + StatisticianUi + + + Form + + + + + StringAssistant + + + Raw data + + + + + Input format + + + + + Cooked data + + + + + Output format + + + + + Create + + + + + SystemTrayIcon + + + xTools + + + + + Open main window + + + + + Exit program + + + + + TextItemEditor + + + Data Editor + + + + + Cancel + + + + + OK + + + + + Preprocessing + + + + + Prefix + + + + + Suffix + + + + + Escape character + + + + + CRC + + + + + Algorithm + + + + + Start index + + + + + End index + + + + + Append + + + + + Big endian + + + + + Payload + + + + + Format + + + + + xTools::AbstractModelUi + + + Clear + + + + + Are you sure to clear all items? + + + + + No Item be Selected + + + + + Please select a item first! + + + + + + Import data + + + + + + JSON (*.json);;All (*) + + + + + xTools::AbstractTransferModel + + + Transfer %1 + + + + + xTools::BleCentral + + + Characteristic does not support write + + + + + Characteristic does not support write without response + + + + + xTools::BleCentralUi + + + Stop + + + + + Scan + + + + + Error Occurred + + + + + Disnotify + + + + + Notify + + + + + With Response + + + + + Without Response + + + + + (No name) + + + + + xTools::ChartsTest + + + ChartsTest + + + + + xTools::ChartsUi + + + Import Data from Excel + + + + + Export Data to Excel + + + + + xTools::ChartsUiSettings + + + + Binary + + + + + + Text + + + + + + Channel + + + + + Visible + + + + + Type + + + + + Color + + + + + Name + + + + + Line + + + + + Spline + + + + + Scatter + + + + + xTools::EmitterModel + + + + Enable + + + + + Disable + + + + + Demo + + + + + Description + + + + + Interval + + + + + Data + + + + + xTools::MainWindow + + + &File + + + + + Exit Application + + + + + &Options + + + + + &Languages + + + + + &Help + + + + + About Qt + + + + + Screenshot + + + + + Application Style + + + + + Settings + + + + + Clear Settings + + + + + Open Settings Directory + + + + + HDPI Policy + + + + + Color Scheme + + + + + System + + + + + Dark + + + + + Light + + + + + (A Part of xTools Project) + + + + + + Commit + + + + + Build Date + + + + + All rights reserved. + + + + + + About + + + + + QR Code + + + + + User QQ Group + + + + + Qt QQ Group + + + + + xTools::Preset + + + Demo + + + + + Description + + + + + Data + + + + + xTools::PresetModel + + + Demo + + + + + Description + + + + + Data + + + + + xTools::ResponderModel + + + + Enable + + + + + Disable + + + + + Demo + + + + + Description + + + + + Option + + + + + Delay + + + + + Reference Data + + + + + Response Data + + + + + xTools::SerialPort + + + Failed to open serial port: %1 + + + + + xTools::SerialPortTransferModel + + + 1 + + + + + 1.5 + + + + + 2 + + + + + Odd + + + + + Even + + + + + Mark + + + + + Space + + + + + + None + + + + + Hardware + + + + + Software + + + + + Transfer Option + + + + + Port Name + + + + + Baud Rate + + + + + Data Bits + + + + + Stop Bits + + + + + Parity + + + + + Flow Control + + + + + Description + + + + + xTools::SocketTransferModel + + + Enable + + + + + Disable + + + + + Transfer Option + + + + + Client Address + + + + + Client Port + + + + + Server Address + + + + + Server Port + + + + + Data Channel + + + + + Authentication + + + + + Username + + + + + Password + + + + + Description + + + + + xTools::SocketUi + + + All clients + + + + + xTools::StatisticianUi + + + %1 frames, %2 bytes, %3B/s + + + + + xTools::StyleSheetManager + + + Dark Amber + + + + + Dark Blue + + + + + Dark Cyan + + + + + Dark Light Green + + + + + Dark Pink + + + + + Dark Purple + + + + + Dark Red + + + + + Dark Teal + + + + + Dark Yellow + + + + + Light Amber + + + + + Light Blue + + + + + Light Cyan + + + + + Light Cyan(500) + + + + + Light Light Green + + + + + Light Pink + + + + + Light Purple + + + + + Light Red + + + + + Light Teal + + + + + Light Yellow + + + + + Enable Stylesheet + + + + + Application Stylesheet + + + + + Warning + + + + + Please enable stylesheet first! + + + + + xTools::xIO + + + + + Text + + + + + + + Binary + + + + + Echo + + + + + Always + + + + + Input Equal Reference + + + + + Input Contain Reference + + + + + Input Does not Contain Reference + + + + + + None + + + + + Even + + + + + Odd + + + + + Space + + + + + Mark + + + + + RTS/CTS + + + + + X-ON/X-OFF + + + + + Hardware + + + + + Software + + + + + Disabled + + + + + Bidirectional + + + + + Unidirectional + + + + + xTools::xTools + + + System + + + + + Round up for .5 and above + + + + + Always round up + + + + + Always round down + + + + + Round up for .75 and above + + + + + Don't round + + + + + Need to Reboot + + + + + The operation need to reboot to effected, reboot the application now? + + + + diff --git a/resources/Translations/xToolsCore_zh_CN.qm b/resources/Translations/xToolsCore_zh_CN.qm index 23d923ae..1dae5a6d 100644 Binary files a/resources/Translations/xToolsCore_zh_CN.qm and b/resources/Translations/xToolsCore_zh_CN.qm differ diff --git a/resources/Translations/xToolsCore_zh_CN.ts b/resources/Translations/xToolsCore_zh_CN.ts index b6bc23f2..5f67e197 100644 --- a/resources/Translations/xToolsCore_zh_CN.ts +++ b/resources/Translations/xToolsCore_zh_CN.ts @@ -1,3330 +1,3335 @@ - - - - - AbstractModelUi - - - Form - - - - - Add - 添加 - - - - Clear - 清空 - - - - Delete - 删除 - - - - Disable all items - 禁止所有 - - - - Import - 导入 - - - - Export - 导出 - - - - AsciiAssistant - - - Filter - 过滤 - - - - Preserve case - 区分大小写 - - - - Bin - 二进制 - - - - Oct - 八进制 - - - - Dec - 十进制 - - - - Hex - 16进制 - - - - Description - 描述 - - - - NUL (NULL) - NUL (空字符) - - - - SOH (Start Of Headling) - SOH (标题开始) - - - - STX (Start Of Text) - STX (文本开始) - - - - ETX (End Of Text) - ETX (文本结束) - - - - EOT (End Of Transmission) - EOT (传输结束) - - - - ENQ (Enquiry) - ENQ (请求) - - - - ACK (Acknowledge) - ACK (确认回应) - - - - BEL (Bell) - BEL (响铃) - - - - BS (Backspace) - BS (退格) - - - - HT (Horizontal Tab) - HT (水平定位符号) - - - - LF/NL(Line Feed/New Line) - LF (换行键) - - - - VT (Vertical Tab) - VT (垂直定位符号) - - - - FF/NP (Form Feed/New Page) - FF/NP (换页键) - - - - CR (Carriage Return) - CR (归位键) - - - - SO (Shift Out) - SO (取消变换) - - - - SI (Shift In) - SI (启用变换) - - - - DLE (Data Link Escape) - DLE (跳出数据通讯) - - - - DC1/XON(Device Control 1/Transmission On) - DC1/XON (设备控制一/XON启用软件速度控制) - - - - DC2 (Device Control 2) - DC2 (设备控制二) - - - - DC3/XOFF(Device Control 3/Transmission Off) - DC3/XOFF (设备控制三/XOFF停用软件速度控制) - - - - DC4 (Device Control 4) - DC4 (设备控制四) - - - - NAK (Negative Acknowledge) - NAK (确认失败回应) - - - - SYN (Synchronous Idle) - SYN (同步用暂停) - - - - ETB (End of Transmission Block) - ETB (区块传输结束) - - - - CAN (Cancel) - CAN (取消) - - - - EM (End of Medium) - EM (连接介质中断) - - - - SUB (Substitute) - SUB (替换) - - - - ESC (Escape) - ESC (替换) - - - - FS (File Separator) - FS (文件分隔符) - - - - GS (Group Separator) - GS (组群分隔符) - - - - RS (Record Separator) - RS (记录分隔符) - - - - US (Unit Separator) - US (单元分隔符) - - - - (Space) - (空格) - - - - DEL (Delete) - DEL (删除) - - - - AssistantFactory - - - CRC Assistant - CRC助手 - - - - mDNS Assistant - mDNS助手 - - - - Ping Assistant - Ping助手 - - - - ASCII Assistant - ASCII助手 - - - - Base64 Assistant - Base64助手 - - - - Number Assistant - 数值助手 - - - - String Assistant - 字符串助手 - - - - Broadcast Assistant - 广播助手 - - - - File Check Assistant - 文件校验助手 - - - - File Merge Assistant - 文件合并助手 - - - - QR Code Assistant - 二维码助手 - - - - CAN Bus Assistant - CAN BUS助手 - - - - Modbus Assistant - Modbus助手 - - - - Base64Assistant - - - Base64 Assistant - Base64 助手 - - - - Plaintext - 明文 - - - - Ciphertext - 密文 - - - - Image - 解码为图片 - - - - Decrypt - 解密 - - - - Encrypt - 加密 - - - - Data error - 数据错误 - - - - Data can not convert image. - 数据无法转换为图片。 - - - - BleCentralUi - - - Form - - - - - Characteristic - 特征值 - - - - (Unsupported characteristic) - （非法的特征值） - - - - BLE Devices - BLE设备 - - - - Scan - 扫描 - - - - Notify - 通知 - - - - Read - 读取 - - - - Service scanning - 服务发现中 - - - - Write mode - 写模式 - - - - Service - 服务 - - - - Device scanning - 设备扫描中 - - - - BroadcastAssistant - - - Output control - 输出控制 - - - - Output format - 输出格式 - - - - Clear - 清空 - - - - Broadcast parameters - 广播参数 - - - - Broadcast address - 广播地址 - - - - 55443 - 55443 - - - - Data format - 数据格式 - - - - Broadcast prefix - 数据前缀 - - - - Broadcast interval - 广播间隔 - - - - Broadcast suffix - 数据后缀 - - - - Broadcast port - 广播端口 - - - - Broadcast data - 广播数据 - - - - - Broadcast - 广播 - - - - Information output - 信息输出 - - - - Broadcast Assistant - 广播助手 - - - - Terminate - 终止 - - - - CanBusAssistant - - - CANBus Studio - CAN BUS 助手 - - - - CAN Frame - CAN 帧 - - - - Extended format - 扩展格式 - - - - Flexible data rate - 固定数据速率 - - - - Frame ID - 帧ID - - - - Frame type - 帧类型 - - - - Frame options - 帧选项 - - - - Bitrate switch - 可选波特率 - - - - Device Control - 设备控制 - - - - Disconnect - 断开连接 - - - - Connect - 连接设备 - - - - Plugin - 插件选择 - - - - Name - 设备名称 - - - - Data View - 数据预览 - - - - Specify Configuration - 指定配置 - - - - Error filter - 错误过滤 - - - - Custom configurations - 自定义配置 - - - - CAN FD - CAN FD - - - - Loopback - 回环 - - - - Data bitrate - 数据位率 - - - - Bitrate - 波特率 - - - - Receive own - 自接收 - - - - CAN Frame Payload - 负载 - - - - Send - 发送 - - - - can0 - can0 - - - - DataFrame - 数据帧 - - - - ErrorFrame - 错误帧 - - - - RemoteRequestFrame - 远程请求帧 - - - - Hex - 16进制 - - - - Interface Name is Empty - 接口名称为空 - - - - Interface name is empty, please input the name then try again! - 接收名称为空，请输入后重试！ - - - - Create device failed! - 创建设备失败！ - - - - Error Occurred - 出现错误 - - - - Connection Error - 链接错误 - - - - Connection error: %1 - 链接错误：%1 - - - - Device is Not Ready - 设备未就绪 - - - - Device is not ready, please connect the device then try angin! - 设备未就绪，请链接设备后重试！ - - - - Error Occure - 出现错误 - - - - unspecified - 未指定 - - - - false - fasle - - - - true - true - - - - ChartsTestUi - - - Format - 数据格式 - - - - Channels - 通道数量 - - - - ChartsUiSettings - - - Clear - 清空 - - - - Export - 导出 - - - - Import - 导入 - - - - Data type - 数据类型 - - - - Legend - 显示图例 - - - - Cache points - 缓存点数 - - - - CommunicationSettings - - - Save tx data - 保存发送 - - - - Browser - 浏览文件 - - - - Save Date - 保存日期 - - - - - Save to file - 写入文件 - - - - Save millisecond - 保存毫秒 - - - - Save rx data - 保存接收 - - - - Save Time - 保存时间 - - - - Save format - 保存格式 - - - - Max bytes - 最大字节 - - - - Text File(*.txt) - 文本文件(*.txt) - - - - CrcAssistant - - - CRC Assistant - CRC助手 - - - - Paloy value - 多项式取值 - - - - Initial value - 初始值 - - - - - Copy - 复制 - - - - More information about crc calculation, visit http://www.ip33.com/crc.html(double clicked to visit) - 更多信息请访问：http://www.ip33.com/crc.html（双击访问） - - - - Input reversal - 输入翻转 - - - - Output reversal - 输出翻转 - - - - Clear - 清空 - - - - Calculate - 计算 - - - - Parameters - 参数设置 - - - - XOR value - 异或值 - - - - Height its is on the left and the low bits is on the right - 高位在左低位在右 - - - - HEX - 16进制 - - - - ASCII - ASCII - - - - Result(HEX) - 结果（16进制） - - - - Parameter model - 参数模型 - - - - Width - 位宽 - - - - <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> -<html><head><meta name="qrichtext" content="1" /><meta charset="utf-8" /><style type="text/css"> -p, li { white-space: pre-wrap; } -hr { height: 1px; border-width: 0; } -li.unchecked::marker { content: "\2610"; } -li.checked::marker { content: "\2612"; } -</style></head><body style=" font-family:'Microsoft YaHei UI'; font-size:9pt; font-weight:400; font-style:normal;"> -<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'SimSun';"><br /></p></body></html> - - - - - Paloy - 负载 - - - - Input data - 输入数据 - - - - Result(BIN) - 结果（二进制） - - - - FileCheckAssistant - - - Form - - - - - Upper result - 大写显示 - - - - Checked file - 校验文件 - - - - Checked progress - 校验进度 - - - - Checked algorithm - 校验算法 - - - - Checked result - 校验结果 - - - - - Calculate - 开始校验 - - - - Open - 选择文件 - - - - File Check Assistant - 文件校验助手 - - - - Remaining time - 剩余时间 - - - - StopCalculating - 停止校验 - - - - FileMergeAssistant - - - Form - - - - - File list - 文件列表 - - - - Import - 导入 - - - - Up - 上移 - - - - Down - 下移 - - - - Remove - 删除 - - - - Clear - 清空 - - - - Merge - 合并 - - - - Import Files - 导入文件 - - - - - Bin file(*.bin);;All file(*) - 二进制文件(*.bin);;所有文件(*) - - - - Open File Failed - 打开失败 - - - - Open file(%1) failed: - 打开文件（%1）失败： - - - - - Merge Files - 合并文件 - - - - No file to merge, please import files first. - 没有需要合并的文件，请导入文件后操作。 - - - - Save Files - 保存文件 - - - - Merge files successfully. - 合并文件成功。 - - - - HashCalculator - - - Calculating finished - 计算完成 - - - - IOPage - - - Output control - 输出控制 - - - - - Text format - 文本格式 - - - - - - Settings - 更多设置 - - - - - Open - 打开设备 - - - - Cycle interval - 循环发送 - - - - Input control - 输入控制 - - - - Send - 发送 - - - - Communication control - 通信控制 - - - - Rx - 接收 - - - - Tx - 发送 - - - - Date - 日期 - - - - Flag - 标志 - - - - Time - 时间 - - - - Ms - 毫秒 - - - - Clear - 清空输出 - - - - IO - 输入输出 - - - - Output - 输出 - - - - Input - 输入 - - - - 📄 - - - - - Presets - 数据预设 - - - - Emitter - 定时发送 - - - - Responder - 自动应答 - - - - Transfers - 数据转发 - - - - Disable - 禁止 - - - - Serial Port - 串口 - - - - UDP Client - UDP客户端 - - - - UDP Server - UDP服务器 - - - - TCP Client - TCP客户端 - - - - TCP Server - TCP服务器 - - - - WebSocket Client - WebSocket客户端 - - - - WebSocket Server - WebSocket服务器 - - - - Close - 关闭设备 - - - - Error Occurred - 出现错误 - - - - Warning - 警告 - - - - [%1][%2][%3][%4] - - - - - InputSettings - - - Show data preview - 显示预览数据 - - - - Append prefix - 数据前缀 - - - - Append suffix - 数据后缀 - - - - Escape character - 转义字符 - - - - CRC end index - CRC结束字节 - - - - CRC start index - CRC起始字节 - - - - CRC arithmetic - CRC算法模型 - - - - Append CRC - 追加CRC数据 - - - - Big endian - 大端字节序 - - - - MainWindow - - - New Window - 新建窗口 - - - - Save Parameters - 保存参数 - - - - - Import Parameters - 导入参数 - - - - - Export Parameters - 导出参数 - - - - &Tools - 工具(&T) - - - - New - 新建工具 - - - - Use System Proxy - 使用系统网络代理 - - - Main Window - 主窗口 - - - - Exit to System Tray - 退出至系统托盘 - - - - &View - 视图(&V) - - - - Bug from Store - 从商店购买 - - - - Third Party Open Source - 第三方开源 - - - - Get Sources from Github - 从GitHub获取源码 - - - - Get Sources from Gitee - 从Gitee获取源码 - - - About xTools - 关于xTools - - - Buy Ultimate Edition - 购买旗舰版 - - - - - Release History - 发布历史 - - - - Join in QQ Group - 加入群聊 - - - - Links - 链接 - - - Qt Official Download - Qt官方下载 - - - Qt Official Blog - Qt官方博客 - - - Qt Official Release - Qt官方发布 - - - Download xTools from Github - 从Github下载 - - - Download xTools from Gitee - 从Gitee下载 - - - Office Web Site - “官方网站” - - - - QR Code - 二维码 - - - - User QQ Group - 用户交流QQ群 - - - - Qt QQ Group - Qt技术交流QQ群 - - - - - Json Files (*.json) - Json文件(*.json) - - - - MdnsAssistant - - - Service type - 服务类型 - - - - - Start - 开始 - - - - Error occurred - 出现错误 - - - - Service type can not be empty, please input then try again. - 服务类型不能为空，请输入后重试。 - - - - Type - 类型 - - - - Hostname - 主机 - - - - Port - 端口 - - - - Attributes - 属性 - - - - Stop - 停止 - - - - ModbusAssistant - - - Device Operations - 设备操作 - - - - Device list - 设备列表 - - - - Close - 关闭 - - - - Open - 打开设备 - - - - Console - 终端 - - - - Client Registers - 客户端寄存器 - - - - Custom Protocol Data Unit - 自定义协议数据单元 - - - - Send - 发送 - - - - Server Register - 服务器寄存器 - - - - Network Settings - 网络配置 - - - - - Address - 地址 - - - - Port - 端口 - - - Client parameters - 客户端参数 - - - - Start address - 起始地址 - - - - Target address - 目标地址 - - - - Timeout - 超时时间 - - - - Address number - 地址数量 - - - - Read - 读取 - - - - Write - 写入 - - - - Repeat times - 重试次数 - - - - Client Parameters - 客户端参数 - - - - Input Control(address and value) - 输入格式(地址和取值) - - - - Input format - 输入格式 - - - - Function code - 功能码 - - - - Serial Port Settings - 串口设置 - - - - Data bits - 数据位 - - - - Port name - 端口名 - - - - Baud rate - 波特率 - - - - Stop bits - 停止位 - - - - Parity - 奇偶位 - - - - Server Parameters - 服务器参数 - - - - Server address - 服务器地址 - - - - Listen only mode - 仅监听模式 - - - - Device busy - 设备繁忙 - - - - RtuClient - RTU主机 - - - - RtuServer - RTU从机 - - - - TcpClient - TCP客户端 - - - - TcpServer - TCP服务器 - - - - NoParity - 无校验 - - - - EvenParity - 偶校验 - - - - OddParity - 奇校验 - - - - SpaceParity - 空格校验 - - - - MarkParity - 标记校验 - - - - 0x01-ReadCoils - 0x01-读线圈 - - - - 0x02-ReadDiscreteInputs - 0x02-读离散输入 - - - - 0x03-ReadHoldingRegisters - 0x03-读保持寄存器 - - - - 0x04-ReadInputRegisters - 0x40-读输入寄存器 - - - - 0x05-WriteSingleCoil - 0x50-写单个线圈 - - - - 0x06-WriteSingleRegister - 0x06-写单个寄存器 - - - - 0x0f-WriteMultipleCoils - 0x0f-写多个线圈 - - - - 0x10-WriteMultipleRegisters - 0x10-写多个寄存器 - - - - Coils - 线圈 - - - - DiscreteInputs - 离散输入 - - - - InputRegisters - 输入寄存器 - - - - HoldingRegisters - 保持寄存器 - - - - - Error occured - 出现错误 - - - - Can not open device: %1.Please check the parameters and try again! - 无法打开设备：%1。请检查参数后重试！ - - - - Can not open device - 无法打开设备 - - - - Value - 值 - - - - Description - 描述 - - - - Device is not Ready - 设备未就绪 - - - - The modbus device is not ready, please check settings and try again later! - 设备未就绪，请检查链接后重试！ - - - - ModbusFactory - - - RTU Client - RTU主机 - - - - RTU Server - RTU从机 - - - - TCP Client - TCP客户端 - - - - TCP Server - TCP服务器 - - - - NumberAssistant - - - Raw data - 输入数据（16进制） - - - - Cooked data(Hex) - 输出数据（16进制） - - - - Cooked data type - 输出数据类型 - - - - Cooked data(Dec) - 输出数据（10进制） - - - - Such as: 1, -1, 1.1, -1.1 - 例如：1, -1, 1.1, -1.1 - - - - Cooked data(Bin) - 输出数据（二进制） - - - - From left to right is high to low - 从左到右未高字节到底字节 - - - - OutputSettings - - - Enable highlighter - 高亮显示 - - - - Filter text - 过滤文件 - - - - Hello,Word - Hello, Word - - - - Show statistician - 显示统计信息 - - - - Enable filter - 过滤使能 - - - - PingAssistant - - - Total: --, Active: --, Finished: --, Remain: -- - 全部: --, 活动: --, 完成: --, 剩余: -- - - - - Target Address - 目标地址 - - - - Online Status - 在线状态 - - - - Comparing - 比较 - - - - Host Name - 主机名称 - - - - Start scan - 开始扫描 - - - - Pause scan - 暂停扫描 - - - - Stop scan - 停止扫描 - - - - Start address - 起始地址 - - - - End address - 结束地址 - - - - Timeout(S) - 超时时间（秒） - - - - Show all - 显示全部 - - - - Show online - 显示在线 - - - - - - IP Error - IP错误 - - - - IP settings error, the start ip and end ip must be set, please check and try again. - IP设置错误，起始IP地址和结束IP地址不能为空，请检查后重试。 - - - - IP settings error, the start ip and end ip must be in the same network segment, please check and try again. - IP设置错误，起始IP地址和结束IP地址必须在同一个网段，请检查后重试。 - - - - IP settings error, the start ip must be less than the end ip, please check and try again. - IP设置错误，起始IP地址必须小于结束IP地址，请检查后重试。 - - - - Total：%1，Active：%2，Finished：%3，Remain：%4 - 全部：%1，活动：%2，完成：%3，剩余：%4 - - - - Scanning - 扫描中 - - - - Online - 在线 - - - - Offline - 离线 - - - - Scanning Finished - 扫描完成 - - - - Scanning finished, you can screen out the result by the toolbar. - 扫描完成，请查验结果。 - - - - QObject - - - Critical Error - 严重错误 - - - - The application has been crashed, clear settings file(all settings data of the application will be clear!) and reboot the application? - 软件已崩溃，是否清空缓存后重启软件？ - - - - (Store) - （商店） - - - - Neet to Reboot - 需要重启 - - - - The operation need to reboot to effectived, reboot the applicaion now? - 该操作需要重启软件生效，是否立即重启？ - - - - Unknown - - - - Need to Reboot - 需要重启 - - - The operation need to reboot to effective, reboot the application now? - 该操作需要重启软件生效，是否立即重启？ - - - - Serial Port - 串口助手 - - - - BLE Central - 蓝牙助手 - - - - BLE Peripheral - BLE外围设备 - - - - UDP Client - UDP客户端 - - - - UDP Server - UDP服务器 - - - - TCP Client - TCP客户端 - - - - TCP Server - TCP服务器 - - - - WebSocket Client - WebSocket客户端 - - - - WebSocket Server - WebSocket服务器 - - - - Charts Test - 图表测试 - - - - Binary - 二进制 - - - - Octal - 八进制 - - - - Decimal - 10进制 - - - - Hexadecimal - 16进制 - - - - ASCII - ASCII - - - - UTF-8 - - - - - - None - 无 - - - - QRCodeAssistant - - - Export - 导出 - - - - Generate - 生成 - - - - Warning - 警告 - - - - Please input the data to generate QR code. - 请输入数据以生成二维码。 - - - - Save QR Code Image - 保存二维码图片 - - - - PNG Images (*.png);;JPG Images (*.jpg) - PNG (*.png);;JPG (*.jpg) - - - - SerialPortUi - - - Parity - 奇偶位 - - - - Port name - 端口名 - - - - Baud rate - 波特率 - - - - Stop bits - 停止位 - - - - Data bits - 数据位 - - - - Flow control - 流控位 - - - - SocketUi - - - Client IP - 客户端地址 - - - - Client port - 客户端端口 - - - - Server IP - 服务器地址 - - - - Server port - 服务器端口 - - - - Write to - 发送目标 - - - - Disconnect all clients - 断开所有客户端链接 - - - - Enable multicast - 使能组播 - - - - Just multicast - 仅组播 - - - - Channel - 数据通道 - - - - Multicast IP - 组播地址 - - - - Authentication - 启用用户验证 - - - - Multicast Port - 组播端口 - - - - User name - 用户名称 - - - - Password - 用户密码 - - - - StatisticianUi - - - Form - - - - - StringAssistant - - - Raw data - 输入数据 - - - - Input format - 输入格式 - - - - Cooked data - 输出数据 - - - - Output format - 输出数据 - - - - Create - 生成 - - - - SystemTrayIcon - - - xTools - xTools - - - - Open main window - 打开主窗口 - - - - Exit program - 退出程序 - - - - TextItemEditor - - - Data Editor - 数据编辑器 - - - - Cancel - 取消 - - - - OK - 确定 - - - - Preprocessing - 数据预处理 - - - - Prefix - 前缀 - - - - Suffix - 后缀 - - - - Escape character - 转义字符 - - - - CRC - CRC - - - - Algorithm - 算法模型 - - - - Start index - 起始字节 - - - - End index - 结束字节 - - - - Append - 追加CRC - - - - Big endian - 大端字节序 - - - - Payload - 数据负载 - - - - Format - 数据格式 - - - - xTools::AbstractModelUi - - - Clear - 清空数据 - - - - Are you sure to clear all items? - 确定删除全部数据吗？ - - - - No Item be Selected - 没有被选中的数据 - - - - Please select a item first! - 请先选择需要删除的数据！ - - - - - Import data - 导入数据 - - - - - JSON (*.json);;All (*) - json(*.json);;所有文件（*） - - - - xTools::AbstractTransferModel - - - Transfer %1 - 转发器 %1 - - - - xTools::Application - - - Initialize application... - 初始化程序.... - - - - System - 禁用 - - - - Round up for .5 and above - 缩放至x.5倍 - - - - Always round up - 总是放大 - - - - Always round down - 总是缩小 - - - - Round up for .75 and above - 缩放至x.75倍 - - - - Don't round - 不缩放 - - - - Reboot application to effective - 重启软件生效 - - - - Need to reboot, reboot to effective now? - 需要重启生效，立即重启？ - - - - xTools::BleCentral - - - Characteristic does not support write - 特征值不支持写操作 - - - - Characteristic does not support write without response - 特征值不支持写操作: 无应答写选项 - - - - xTools::BleCentralUi - - - Stop - 停止扫描 - - - - Scan - 开始扫描 - - - - Error Occurred - 出现错误 - - - - Disnotify - 取消通知 - - - - Notify - 通知 - - - - With Response - 有应答 - - - - Without Response - 无应答 - - - - (No name) - （未命名） - - - - xTools::ChartsTest - - - ChartsTest - 图表测试 - - - - xTools::ChartsUi - - - Import Data from Excel - 从Excel表格导入 - - - - Export Data to Excel - 导出至Excel表格 - - - - xTools::ChartsUiSettings - - - - Binary - 二进制 - - - - - Text - 文本 - - - - - Channel - 通道 - - - - Visible - 可见 - - - - Type - 类型 - - - - Color - 颜色 - - - - Name - 名称 - - - - Line - 折线 - - - - Spline - 曲线 - - - - Scatter - 散点图 - - - - xTools::EmitterModel - - - - Enable - 使能 - - - - Disable - 禁止 - - - - Demo - 测试 - - - - Description - 描述 - - - - Interval - 间隔 - - - - Data - 数据 - - - - xTools::MainWindow - - - &File - 文件(&F) - - - &Exit - 退出(&E) - - - - Exit Application - 退出应用 - - - - &Options - 选项(&O) - - - - &Languages - 语言(&L) - - - - &Help - 帮助(&H) - - - &About - 关于 - - - - About Qt - 关于Qt - - - - Screenshot - 截图并复制 - - - - Application Style - 应用风格 - - - - Settings - 配置信息 - - - - Clear Settings - 清空配置 - - - - Open Settings Directory - 打开配置目录 - - - - HDPI Policy - 适配策略 - - - - Color Scheme - 主题颜色 - - - - System - 系统 - - - - Dark - 暗黑 - - - - Light - 明亮 - - - - (A Part of xTools Project) - (xTools 系列软件) - - - - - Commit - 最后提交 - - - - Build Date - 构建日期 - - - - All rights reserved. - 保留所有版权。 - - - - - About - 关于 - - - Reboot application to effective - 重启软件生效 - - - Need to reboot, reboot to effective now? - 需要重启生效，立即重启？ - - - - QR Code - 二维码 - - - - User QQ Group - 用户交流QQ群 - - - - Qt QQ Group - Qt技术交流QQ群 - - - - xTools::Preset - - - Demo - 示例 - - - - Description - 描述 - - - - Data - 数据 - - - - xTools::PresetModel - - - Demo - 示例 - - - - Description - 描述 - - - - Data - 数据 - - - - xTools::ResponderModel - - - - Enable - 使能 - - - - Disable - 禁止 - - - - Demo - 示例 - - - - Description - 描述 - - - - Option - 应答选项 - - - - Delay - 延时 - - - - Reference Data - 参考数据 - - - - Response Data - 应答数据 - - - - xTools::SerialPort - - - Failed to open serial port: %1 - 打开串口失败：%1 - - - - xTools::SerialPortTransferModel - - - 1 - 1 - - - - 1.5 - 1.5 - - - - 2 - 2 - - - - Odd - 奇校验 - - - - Even - 偶校验 - - - - Mark - 标记校验 - - - - Space - 空格校验 - - - - - None - 无 - - - - Hardware - 硬件 - - - - Software - 软件 - - - - Transfer Option - 转发选项 - - - - Port Name - 端口名 - - - - Baud Rate - 波特率 - - - - Data Bits - 数据位 - - - - Stop Bits - 停止位 - - - - Parity - 奇偶位 - - - - Flow Control - 流控位 - - - - Description - 描述 - - - - xTools::SocketTransferModel - - - Enable - 使能 - - - - Disable - 禁止 - - - - Transfer Option - 转发选项 - - - - Client Address - 客户端地址 - - - - Client Port - 客户端端口 - - - - Server Address - 服务器地址 - - - - Server Port - 服务器端口 - - - - Data Channel - 数据通道 - - - - Authentication - 校验 - - - - Username - 用户名 - - - - Password - 密码 - - - - Description - 描述 - - - - xTools::SocketUi - - - All clients - 所有客户端 - - - - xTools::StatisticianUi - - - %1 frames, %2 bytes, %3B/s - %1 帧, %2 字节, %3B/s - - - - xTools::StyleSheetManager - - - Dark Amber - 深色-黄褐色 - - - - Dark Blue - 深色-蓝色 - - - - Dark Cyan - 深色-青色 - - - - Dark Light Green - 深色-浅绿色 - - - - Dark Pink - 深色-粉红色 - - - - Dark Purple - 深色-紫色 - - - - Dark Red - 深色-红色 - - - - Dark Teal - 深色-蓝绿色 - - - - Dark Yellow - 深色-黄色 - - - - Light Amber - 浅色-黄褐色 - - - - Light Blue - 浅色-蓝色 - - - - Light Cyan - 浅色-青色 - - - - Light Cyan(500) - 浅色-青色（500） - - - - Light Light Green - 浅色-浅绿色 - - - - Light Pink - 浅色-粉红色 - - - - Light Purple - 浅色-紫色 - - - - Light Red - 浅色-红色 - - - - Light Teal - 浅色-蓝绿色 - - - - Light Yellow - 浅色-黄色 - - - - Enable Stylesheet - 允许自定义样式 - - - - Application Stylesheet - 应用样式 - - - - Warning - 警告 - - - - Please enable stylesheet first! - 请使能自定义样式后重试！ - - - - xTools::xIO - - - - - Text - 文本 - - - - - - Binary - 二进制 - - - - Echo - 回显 - - - - Always - 总是 - - - - Input Equal Reference - 输入等于参考 - - - - Input Contain Reference - 输入包含参考 - - - - Input Does not Contain Reference - 输入不包含参考 - - - - - None - 无 - - - - Even - 偶校验 - - - - Odd - 奇校验 - - - - Space - 空格 - - - - Mark - 标记校验 - - - - RTS/CTS - - - - - X-ON/X-OFF - - - - - Hardware - 硬件 - - - - Software - 软件 - - - - Disabled - 禁止 - - - - Bidirectional - 双向 - - - - Unidirectional - 单项 - - - - xTools::xTools - - System - 系统 - - - Round up for .5 and above - 缩放至x.5倍 - - - Always round up - 总是放大 - - - Always round down - 总是缩小 - - - Round up for .75 and above - 缩放至x.75倍 - - - Don't round - 不缩放 - - - + + + + + AbstractModelUi + + + Form + + + + + Add + 添加 + + + + Clear + 清空 + + + + Delete + 删除 + + + + Disable all items + 禁止所有 + + + + Import + 导入 + + + + Export + 导出 + + + + AsciiAssistant + + + Filter + 过滤 + + + + Preserve case + 区分大小写 + + + + Bin + 二进制 + + + + Oct + 八进制 + + + + Dec + 十进制 + + + + Hex + 16进制 + + + + Description + 描述 + + + + NUL (NULL) + NUL (空字符) + + + + SOH (Start Of Headling) + SOH (标题开始) + + + + STX (Start Of Text) + STX (文本开始) + + + + ETX (End Of Text) + ETX (文本结束) + + + + EOT (End Of Transmission) + EOT (传输结束) + + + + ENQ (Enquiry) + ENQ (请求) + + + + ACK (Acknowledge) + ACK (确认回应) + + + + BEL (Bell) + BEL (响铃) + + + + BS (Backspace) + BS (退格) + + + + HT (Horizontal Tab) + HT (水平定位符号) + + + + LF/NL(Line Feed/New Line) + LF (换行键) + + + + VT (Vertical Tab) + VT (垂直定位符号) + + + + FF/NP (Form Feed/New Page) + FF/NP (换页键) + + + + CR (Carriage Return) + CR (归位键) + + + + SO (Shift Out) + SO (取消变换) + + + + SI (Shift In) + SI (启用变换) + + + + DLE (Data Link Escape) + DLE (跳出数据通讯) + + + + DC1/XON(Device Control 1/Transmission On) + DC1/XON (设备控制一/XON启用软件速度控制) + + + + DC2 (Device Control 2) + DC2 (设备控制二) + + + + DC3/XOFF(Device Control 3/Transmission Off) + DC3/XOFF (设备控制三/XOFF停用软件速度控制) + + + + DC4 (Device Control 4) + DC4 (设备控制四) + + + + NAK (Negative Acknowledge) + NAK (确认失败回应) + + + + SYN (Synchronous Idle) + SYN (同步用暂停) + + + + ETB (End of Transmission Block) + ETB (区块传输结束) + + + + CAN (Cancel) + CAN (取消) + + + + EM (End of Medium) + EM (连接介质中断) + + + + SUB (Substitute) + SUB (替换) + + + + ESC (Escape) + ESC (替换) + + + + FS (File Separator) + FS (文件分隔符) + + + + GS (Group Separator) + GS (组群分隔符) + + + + RS (Record Separator) + RS (记录分隔符) + + + + US (Unit Separator) + US (单元分隔符) + + + + (Space) + (空格) + + + + DEL (Delete) + DEL (删除) + + + + AssistantFactory + + + CRC Assistant + CRC助手 + + + + mDNS Assistant + mDNS助手 + + + + Ping Assistant + Ping助手 + + + + ASCII Assistant + ASCII助手 + + + + Base64 Assistant + Base64助手 + + + + Number Assistant + 数值助手 + + + + String Assistant + 字符串助手 + + + + Broadcast Assistant + 广播助手 + + + + File Check Assistant + 文件校验助手 + + + + File Merge Assistant + 文件合并助手 + + + + QR Code Assistant + 二维码助手 + + + + CAN Bus Assistant + CAN BUS助手 + + + + Modbus Assistant + Modbus助手 + + + + Base64Assistant + + + Base64 Assistant + Base64 助手 + + + + Plaintext + 明文 + + + + Ciphertext + 密文 + + + + Image + 解码为图片 + + + + Decrypt + 解密 + + + + Encrypt + 加密 + + + + Data error + 数据错误 + + + + Data can not convert image. + 数据无法转换为图片。 + + + + BleCentralUi + + + Form + + + + + Characteristic + 特征值 + + + + (Unsupported characteristic) + （非法的特征值） + + + + BLE Devices + BLE设备 + + + + Scan + 扫描 + + + + Notify + 通知 + + + + Read + 读取 + + + + Service scanning + 服务发现中 + + + + Write mode + 写模式 + + + + Service + 服务 + + + + Device scanning + 设备扫描中 + + + + BroadcastAssistant + + + Output control + 输出控制 + + + + Output format + 输出格式 + + + + Clear + 清空 + + + + Broadcast parameters + 广播参数 + + + + Broadcast address + 广播地址 + + + + 55443 + 55443 + + + + Data format + 数据格式 + + + + Broadcast prefix + 数据前缀 + + + + Broadcast interval + 广播间隔 + + + + Broadcast suffix + 数据后缀 + + + + Broadcast port + 广播端口 + + + + Broadcast data + 广播数据 + + + + + Broadcast + 广播 + + + + Information output + 信息输出 + + + + Broadcast Assistant + 广播助手 + + + + Terminate + 终止 + + + + CanBusAssistant + + + CANBus Studio + CAN BUS 助手 + + + + CAN Frame + CAN 帧 + + + + Extended format + 扩展格式 + + + + Flexible data rate + 固定数据速率 + + + + Frame ID + 帧ID + + + + Frame type + 帧类型 + + + + Frame options + 帧选项 + + + + Bitrate switch + 可选波特率 + + + + Device Control + 设备控制 + + + + Disconnect + 断开连接 + + + + Connect + 连接设备 + + + + Plugin + 插件选择 + + + + Name + 设备名称 + + + + Data View + 数据预览 + + + + Specify Configuration + 指定配置 + + + + Error filter + 错误过滤 + + + + Custom configurations + 自定义配置 + + + + CAN FD + CAN FD + + + + Loopback + 回环 + + + + Data bitrate + 数据位率 + + + + Bitrate + 波特率 + + + + Receive own + 自接收 + + + + CAN Frame Payload + 负载 + + + + Send + 发送 + + + + can0 + can0 + + + + DataFrame + 数据帧 + + + + ErrorFrame + 错误帧 + + + + RemoteRequestFrame + 远程请求帧 + + + + Hex + 16进制 + + + + Interface Name is Empty + 接口名称为空 + + + + Interface name is empty, please input the name then try again! + 接收名称为空，请输入后重试！ + + + Create device failed! + 创建设备失败！ + + + + Error Occurred + 出现错误 + + + + Connection Error + 链接错误 + + + + Connection error: %1 + 链接错误：%1 + + + + Device is Not Ready + 设备未就绪 + + + + Device is not ready, please connect the device then try angin! + 设备未就绪，请链接设备后重试！ + + + + Error Occure + 出现错误 + + + + unspecified + 未指定 + + + + false + fasle + + + + true + true + + + + ChartsTestUi + + + Format + 数据格式 + + + + Channels + 通道数量 + + + + ChartsUiSettings + + + Clear + 清空 + + + + Export + 导出 + + + + Import + 导入 + + + + Data type + 数据类型 + + + + Legend + 显示图例 + + + + Cache points + 缓存点数 + + + + CommunicationSettings + + + Save tx data + 保存发送 + + + + Browser + 浏览文件 + + + + Save Date + 保存日期 + + + + + Save to file + 写入文件 + + + + Save millisecond + 保存毫秒 + + + + Save rx data + 保存接收 + + + + Save Time + 保存时间 + + + + Save format + 保存格式 + + + + Max bytes + 最大字节 + + + + Text File(*.txt) + 文本文件(*.txt) + + + + CrcAssistant + + + CRC Assistant + CRC助手 + + + + Paloy value + 多项式取值 + + + + Initial value + 初始值 + + + + + Copy + 复制 + + + + More information about crc calculation, visit http://www.ip33.com/crc.html(double clicked to visit) + 更多信息请访问：http://www.ip33.com/crc.html（双击访问） + + + + Input reversal + 输入翻转 + + + + Output reversal + 输出翻转 + + + + Clear + 清空 + + + + Calculate + 计算 + + + + Parameters + 参数设置 + + + + XOR value + 异或值 + + + + Height its is on the left and the low bits is on the right + 高位在左低位在右 + + + + HEX + 16进制 + + + + ASCII + ASCII + + + + Result(HEX) + 结果（16进制） + + + + Parameter model + 参数模型 + + + + Width + 位宽 + + + + <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> +<html><head><meta name="qrichtext" content="1" /><meta charset="utf-8" /><style type="text/css"> +p, li { white-space: pre-wrap; } +hr { height: 1px; border-width: 0; } +li.unchecked::marker { content: "\2610"; } +li.checked::marker { content: "\2612"; } +</style></head><body style=" font-family:'Microsoft YaHei UI'; font-size:9pt; font-weight:400; font-style:normal;"> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'SimSun';"><br /></p></body></html> + + + + + Paloy + 负载 + + + + Input data + 输入数据 + + + + Result(BIN) + 结果（二进制） + + + + FileCheckAssistant + + + Form + + + + + Upper result + 大写显示 + + + + Checked file + 校验文件 + + + + Checked progress + 校验进度 + + + + Checked algorithm + 校验算法 + + + + Checked result + 校验结果 + + + + + Calculate + 开始校验 + + + + Open + 选择文件 + + + + File Check Assistant + 文件校验助手 + + + + Remaining time + 剩余时间 + + + + StopCalculating + 停止校验 + + + + FileMergeAssistant + + + Form + + + + + File list + 文件列表 + + + + Import + 导入 + + + + Up + 上移 + + + + Down + 下移 + + + + Remove + 删除 + + + + Clear + 清空 + + + + Merge + 合并 + + + + Import Files + 导入文件 + + + + + Bin file(*.bin);;All file(*) + 二进制文件(*.bin);;所有文件(*) + + + + Open File Failed + 打开失败 + + + + Open file(%1) failed: + 打开文件（%1）失败： + + + + + Merge Files + 合并文件 + + + + No file to merge, please import files first. + 没有需要合并的文件，请导入文件后操作。 + + + + Save Files + 保存文件 + + + + Merge files successfully. + 合并文件成功。 + + + + HashCalculator + + + Calculating finished + 计算完成 + + + + IOPage + + + Output control + 输出控制 + + + + + Text format + 文本格式 + + + + + + Settings + 更多设置 + + + + + Open + 打开设备 + + + + Cycle interval + 循环发送 + + + + Input control + 输入控制 + + + + Send + 发送 + + + + Communication control + 通信控制 + + + + Rx + 接收 + + + + Tx + 发送 + + + + Date + 日期 + + + + Flag + 标志 + + + + Time + 时间 + + + + Ms + 毫秒 + + + + Clear + 清空输出 + + + + IO + 输入输出 + + + + Output + 输出 + + + + Input + 输入 + + + + 📄 + + + + + Presets + 数据预设 + + + + Emitter + 定时发送 + + + + Responder + 自动应答 + + + + Transfers + 数据转发 + + + + Disable + 禁止 + + + + Serial Port + 串口 + + + + UDP Client + UDP客户端 + + + + UDP Server + UDP服务器 + + + + TCP Client + TCP客户端 + + + + TCP Server + TCP服务器 + + + + WebSocket Client + WebSocket客户端 + + + + WebSocket Server + WebSocket服务器 + + + + Close + 关闭设备 + + + + Error Occurred + 出现错误 + + + + Warning + 警告 + + + + [%1][%2][%3][%4] + + + + + InputSettings + + + Show data preview + 显示预览数据 + + + + Append prefix + 数据前缀 + + + + Append suffix + 数据后缀 + + + + Escape character + 转义字符 + + + + CRC end index + CRC结束字节 + + + + CRC start index + CRC起始字节 + + + + CRC arithmetic + CRC算法模型 + + + + Append CRC + 追加CRC数据 + + + + Big endian + 大端字节序 + + + + MainWindow + + + New Window + 新建窗口 + + + + Save Parameters + 保存参数 + + + + + Import Parameters + 导入参数 + + + + + Export Parameters + 导出参数 + + + + &Tools + 工具(&T) + + + + New + 新建工具 + + + + Use System Proxy + 使用系统网络代理 + + + Main Window + 主窗口 + + + + Exit to System Tray + 退出至系统托盘 + + + + &View + 视图(&V) + + + + Bug from Store + 从商店购买 + + + + Third Party Open Source + 第三方开源 + + + + Get Sources from Github + 从GitHub获取源码 + + + + Get Sources from Gitee + 从Gitee获取源码 + + + About xTools + 关于xTools + + + Buy Ultimate Edition + 购买旗舰版 + + + + + Release History + 发布历史 + + + + Join in QQ Group + 加入群聊 + + + + Links + 链接 + + + Qt Official Download + Qt官方下载 + + + Qt Official Blog + Qt官方博客 + + + Qt Official Release + Qt官方发布 + + + Download xTools from Github + 从Github下载 + + + Download xTools from Gitee + 从Gitee下载 + + + Office Web Site + “官方网站” + + + + QR Code + 二维码 + + + + User QQ Group + 用户交流QQ群 + + + + Qt QQ Group + Qt技术交流QQ群 + + + + + Json Files (*.json) + Json文件(*.json) + + + + MdnsAssistant + + + Service type + 服务类型 + + + + + Start + 开始 + + + + Error occurred + 出现错误 + + + + Service type can not be empty, please input then try again. + 服务类型不能为空，请输入后重试。 + + + + Type + 类型 + + + + Hostname + 主机 + + + + Port + 端口 + + + + Attributes + 属性 + + + + Stop + 停止 + + + + ModbusAssistant + + + Device Operations + 设备操作 + + + + Device list + 设备列表 + + + + Close + 关闭 + + + + Open + 打开设备 + + + + Console + 终端 + + + + Client Registers + 客户端寄存器 + + + + Custom Protocol Data Unit + 自定义协议数据单元 + + + + Send + 发送 + + + + Server Register + 服务器寄存器 + + + + Network Settings + 网络配置 + + + + + Address + 地址 + + + + Port + 端口 + + + Client parameters + 客户端参数 + + + + Start address + 起始地址 + + + + Target address + 目标地址 + + + + Timeout + 超时时间 + + + + Address number + 地址数量 + + + + Read + 读取 + + + + Write + 写入 + + + + Repeat times + 重试次数 + + + + Client Parameters + 客户端参数 + + + + Input Control(address and value) + 输入格式(地址和取值) + + + + Input format + 输入格式 + + + + Function code + 功能码 + + + + Serial Port Settings + 串口设置 + + + + Data bits + 数据位 + + + + Port name + 端口名 + + + + Baud rate + 波特率 + + + + Stop bits + 停止位 + + + + Parity + 奇偶位 + + + + Server Parameters + 服务器参数 + + + + Server address + 服务器地址 + + + + Listen only mode + 仅监听模式 + + + + Device busy + 设备繁忙 + + + + RtuClient + RTU主机 + + + + RtuServer + RTU从机 + + + + TcpClient + TCP客户端 + + + + TcpServer + TCP服务器 + + + + NoParity + 无校验 + + + + EvenParity + 偶校验 + + + + OddParity + 奇校验 + + + + SpaceParity + 空格校验 + + + + MarkParity + 标记校验 + + + + 0x01-ReadCoils + 0x01-读线圈 + + + + 0x02-ReadDiscreteInputs + 0x02-读离散输入 + + + + 0x03-ReadHoldingRegisters + 0x03-读保持寄存器 + + + + 0x04-ReadInputRegisters + 0x40-读输入寄存器 + + + + 0x05-WriteSingleCoil + 0x50-写单个线圈 + + + + 0x06-WriteSingleRegister + 0x06-写单个寄存器 + + + + 0x0f-WriteMultipleCoils + 0x0f-写多个线圈 + + + + 0x10-WriteMultipleRegisters + 0x10-写多个寄存器 + + + + Coils + 线圈 + + + + DiscreteInputs + 离散输入 + + + + InputRegisters + 输入寄存器 + + + + HoldingRegisters + 保持寄存器 + + + + + Error occured + 出现错误 + + + + Can not open device: %1.Please check the parameters and try again! + 无法打开设备：%1。请检查参数后重试！ + + + + Can not open device + 无法打开设备 + + + + Value + 值 + + + + Description + 描述 + + + + Device is not Ready + 设备未就绪 + + + + The modbus device is not ready, please check settings and try again later! + 设备未就绪，请检查链接后重试！ + + + + ModbusFactory + + + RTU Client + RTU主机 + + + + RTU Server + RTU从机 + + + + TCP Client + TCP客户端 + + + + TCP Server + TCP服务器 + + + + NumberAssistant + + + Raw data + 输入数据（16进制） + + + + Cooked data(Hex) + 输出数据（16进制） + + + + Cooked data type + 输出数据类型 + + + + Cooked data(Dec) + 输出数据（10进制） + + + + Such as: 1, -1, 1.1, -1.1 + 例如：1, -1, 1.1, -1.1 + + + + Cooked data(Bin) + 输出数据（二进制） + + + + From left to right is high to low + 从左到右未高字节到底字节 + + + + OutputSettings + + + Enable highlighter + 高亮显示 + + + + Filter text + 过滤文件 + + + + Hello,Word + Hello, Word + + + + Show statistician + 显示统计信息 + + + + Enable filter + 过滤使能 + + + + PingAssistant + + + Total: --, Active: --, Finished: --, Remain: -- + 全部: --, 活动: --, 完成: --, 剩余: -- + + + + Target Address + 目标地址 + + + + Online Status + 在线状态 + + + + Comparing + 比较 + + + + Host Name + 主机名称 + + + + Start scan + 开始扫描 + + + + Pause scan + 暂停扫描 + + + + Stop scan + 停止扫描 + + + + Start address + 起始地址 + + + + End address + 结束地址 + + + + Timeout(S) + 超时时间（秒） + + + + Show all + 显示全部 + + + + Show online + 显示在线 + + + + + + IP Error + IP错误 + + + + IP settings error, the start ip and end ip must be set, please check and try again. + IP设置错误，起始IP地址和结束IP地址不能为空，请检查后重试。 + + + + IP settings error, the start ip and end ip must be in the same network segment, please check and try again. + IP设置错误，起始IP地址和结束IP地址必须在同一个网段，请检查后重试。 + + + + IP settings error, the start ip must be less than the end ip, please check and try again. + IP设置错误，起始IP地址必须小于结束IP地址，请检查后重试。 + + + + Total：%1，Active：%2，Finished：%3，Remain：%4 + 全部：%1，活动：%2，完成：%3，剩余：%4 + + + + Scanning + 扫描中 + + + + Online + 在线 + + + + Offline + 离线 + + + + Scanning Finished + 扫描完成 + + + + Scanning finished, you can screen out the result by the toolbar. + 扫描完成，请查验结果。 + + + + QObject + + Critical Error + 严重错误 + + + The application has been crashed, clear settings file(all settings data of the application will be clear!) and reboot the application? + 软件已崩溃，是否清空缓存后重启软件？ + + + (Store) + （商店） + + + Neet to Reboot + 需要重启 + + + The operation need to reboot to effectived, reboot the applicaion now? + 该操作需要重启软件生效，是否立即重启？ + + + + Unknown + + + + Need to Reboot + 需要重启 + + + The operation need to reboot to effected, reboot the application now? + 该操作需要重启软件生效，立即重启软件吗？ + + + The operation need to reboot to effective, reboot the application now? + 该操作需要重启软件生效，是否立即重启？ + + + + Serial Port + 串口助手 + + + + BLE Central + 蓝牙助手 + + + + BLE Peripheral + BLE外围设备 + + + + UDP Client + UDP客户端 + + + + UDP Server + UDP服务器 + + + + TCP Client + TCP客户端 + + + + TCP Server + TCP服务器 + + + + WebSocket Client + WebSocket客户端 + + + + WebSocket Server + WebSocket服务器 + + + + Charts Test + 图表测试 + + + + Binary + 二进制 + + + + Octal + 八进制 + + + + Decimal + 10进制 + + + + Hexadecimal + 16进制 + + + + ASCII + ASCII + + + + UTF-8 + + + + + + None + 无 + + + + QRCodeAssistant + + + Export + 导出 + + + + Generate + 生成 + + + + Warning + 警告 + + + + Please input the data to generate QR code. + 请输入数据以生成二维码。 + + + + Save QR Code Image + 保存二维码图片 + + + + PNG Images (*.png);;JPG Images (*.jpg) + PNG (*.png);;JPG (*.jpg) + + + + SerialPortUi + + + Parity + 奇偶位 + + + + Port name + 端口名 + + + + Baud rate + 波特率 + + + + Stop bits + 停止位 + + + + Data bits + 数据位 + + + + Flow control + 流控位 + + + + SocketUi + + + Client IP + 客户端地址 + + + + Client port + 客户端端口 + + + + Server IP + 服务器地址 + + + + Server port + 服务器端口 + + + + Write to + 发送目标 + + + + Disconnect all clients + 断开所有客户端链接 + + + + Enable multicast + 使能组播 + + + + Just multicast + 仅组播 + + + + Channel + 数据通道 + + + + Multicast IP + 组播地址 + + + + Authentication + 启用用户验证 + + + + Multicast Port + 组播端口 + + + + User name + 用户名称 + + + + Password + 用户密码 + + + + StatisticianUi + + + Form + + + + + StringAssistant + + + Raw data + 输入数据 + + + + Input format + 输入格式 + + + + Cooked data + 输出数据 + + + + Output format + 输出数据 + + + + Create + 生成 + + + + SystemTrayIcon + + + xTools + xTools + + + + Open main window + 打开主窗口 + + + + Exit program + 退出程序 + + + + TextItemEditor + + + Data Editor + 数据编辑器 + + + + Cancel + 取消 + + + + OK + 确定 + + + + Preprocessing + 数据预处理 + + + + Prefix + 前缀 + + + + Suffix + 后缀 + + + + Escape character + 转义字符 + + + + CRC + CRC + + + + Algorithm + 算法模型 + + + + Start index + 起始字节 + + + + End index + 结束字节 + + + + Append + 追加CRC + + + + Big endian + 大端字节序 + + + + Payload + 数据负载 + + + + Format + 数据格式 + + + + xTools::AbstractModelUi + + + Clear + 清空数据 + + + + Are you sure to clear all items? + 确定删除全部数据吗？ + + + + No Item be Selected + 没有被选中的数据 + + + + Please select a item first! + 请先选择需要删除的数据！ + + + + + Import data + 导入数据 + + + + + JSON (*.json);;All (*) + json(*.json);;所有文件（*） + + + + xTools::AbstractTransferModel + + + Transfer %1 + 转发器 %1 + + + + xTools::Application + + Initialize application... + 初始化程序.... + + + System + 禁用 + + + Round up for .5 and above + 缩放至x.5倍 + + + Always round up + 总是放大 + + + Always round down + 总是缩小 + + + Round up for .75 and above + 缩放至x.75倍 + + + Don't round + 不缩放 + + + Reboot application to effective + 重启软件生效 + + + Need to reboot, reboot to effective now? + 需要重启生效，立即重启？ + + + + xTools::BleCentral + + + Characteristic does not support write + 特征值不支持写操作 + + + + Characteristic does not support write without response + 特征值不支持写操作: 无应答写选项 + + + + xTools::BleCentralUi + + + Stop + 停止扫描 + + + + Scan + 开始扫描 + + + + Error Occurred + 出现错误 + + + + Disnotify + 取消通知 + + + + Notify + 通知 + + + + With Response + 有应答 + + + + Without Response + 无应答 + + + + (No name) + （未命名） + + + + xTools::ChartsTest + + + ChartsTest + 图表测试 + + + + xTools::ChartsUi + + + Import Data from Excel + 从Excel表格导入 + + + + Export Data to Excel + 导出至Excel表格 + + + + xTools::ChartsUiSettings + + + + Binary + 二进制 + + + + + Text + 文本 + + + + + Channel + 通道 + + + + Visible + 可见 + + + + Type + 类型 + + + + Color + 颜色 + + + + Name + 名称 + + + + Line + 折线 + + + + Spline + 曲线 + + + + Scatter + 散点图 + + + + xTools::EmitterModel + + + + Enable + 使能 + + + + Disable + 禁止 + + + + Demo + 测试 + + + + Description + 描述 + + + + Interval + 间隔 + + + + Data + 数据 + + + + xTools::MainWindow + + + &File + 文件(&F) + + + &Exit + 退出(&E) + + + + Exit Application + 退出应用 + + + + &Options + 选项(&O) + + + + &Languages + 语言(&L) + + + + &Help + 帮助(&H) + + + &About + 关于 + + + + About Qt + 关于Qt + + + + Screenshot + 截图并复制 + + + + Application Style + 应用风格 + + + + Settings + 配置信息 + + + + Clear Settings + 清空配置 + + + + Open Settings Directory + 打开配置目录 + + + + HDPI Policy + 适配策略 + + + + Color Scheme + 主题颜色 + + + + System + 系统 + + + + Dark + 暗黑 + + + + Light + 明亮 + + + + (A Part of xTools Project) + (xTools 系列软件) + + + + + Commit + 最后提交 + + + + Build Date + 构建日期 + + + + All rights reserved. + 保留所有版权。 + + + + + About + 关于 + + + Reboot application to effective + 重启软件生效 + + + Need to reboot, reboot to effective now? + 需要重启生效，立即重启？ + + + + QR Code + 二维码 + + + + User QQ Group + 用户交流QQ群 + + + + Qt QQ Group + Qt技术交流QQ群 + + + + xTools::Preset + + + Demo + 示例 + + + + Description + 描述 + + + + Data + 数据 + + + + xTools::PresetModel + + + Demo + 示例 + + + + Description + 描述 + + + + Data + 数据 + + + + xTools::ResponderModel + + + + Enable + 使能 + + + + Disable + 禁止 + + + + Demo + 示例 + + + + Description + 描述 + + + + Option + 应答选项 + + + + Delay + 延时 + + + + Reference Data + 参考数据 + + + + Response Data + 应答数据 + + + + xTools::SerialPort + + + Failed to open serial port: %1 + 打开串口失败：%1 + + + + xTools::SerialPortTransferModel + + + 1 + 1 + + + + 1.5 + 1.5 + + + + 2 + 2 + + + + Odd + 奇校验 + + + + Even + 偶校验 + + + + Mark + 标记校验 + + + + Space + 空格校验 + + + + + None + 无 + + + + Hardware + 硬件 + + + + Software + 软件 + + + + Transfer Option + 转发选项 + + + + Port Name + 端口名 + + + + Baud Rate + 波特率 + + + + Data Bits + 数据位 + + + + Stop Bits + 停止位 + + + + Parity + 奇偶位 + + + + Flow Control + 流控位 + + + + Description + 描述 + + + + xTools::SocketTransferModel + + + Enable + 使能 + + + + Disable + 禁止 + + + + Transfer Option + 转发选项 + + + + Client Address + 客户端地址 + + + + Client Port + 客户端端口 + + + + Server Address + 服务器地址 + + + + Server Port + 服务器端口 + + + + Data Channel + 数据通道 + + + + Authentication + 校验 + + + + Username + 用户名 + + + + Password + 密码 + + + + Description + 描述 + + + + xTools::SocketUi + + + All clients + 所有客户端 + + + + xTools::StatisticianUi + + + %1 frames, %2 bytes, %3B/s + %1 帧, %2 字节, %3B/s + + + + xTools::StyleSheetManager + + + Dark Amber + 深色-黄褐色 + + + + Dark Blue + 深色-蓝色 + + + + Dark Cyan + 深色-青色 + + + + Dark Light Green + 深色-浅绿色 + + + + Dark Pink + 深色-粉红色 + + + + Dark Purple + 深色-紫色 + + + + Dark Red + 深色-红色 + + + + Dark Teal + 深色-蓝绿色 + + + + Dark Yellow + 深色-黄色 + + + + Light Amber + 浅色-黄褐色 + + + + Light Blue + 浅色-蓝色 + + + + Light Cyan + 浅色-青色 + + + + Light Cyan(500) + 浅色-青色（500） + + + + Light Light Green + 浅色-浅绿色 + + + + Light Pink + 浅色-粉红色 + + + + Light Purple + 浅色-紫色 + + + + Light Red + 浅色-红色 + + + + Light Teal + 浅色-蓝绿色 + + + + Light Yellow + 浅色-黄色 + + + + Enable Stylesheet + 允许自定义样式 + + + + Application Stylesheet + 应用样式 + + + + Warning + 警告 + + + + Please enable stylesheet first! + 请使能自定义样式后重试！ + + + + xTools::xIO + + + + + Text + 文本 + + + + + + Binary + 二进制 + + + + Echo + 回显 + + + + Always + 总是 + + + + Input Equal Reference + 输入等于参考 + + + + Input Contain Reference + 输入包含参考 + + + + Input Does not Contain Reference + 输入不包含参考 + + + + + None + 无 + + + + Even + 偶校验 + + + + Odd + 奇校验 + + + + Space + 空格 + + + + Mark + 标记校验 + + + + RTS/CTS + + + + + X-ON/X-OFF + + + + + Hardware + 硬件 + + + + Software + 软件 + + + + Disabled + 禁止 + + + + Bidirectional + 双向 + + + + Unidirectional + 单项 + + + + xTools::xTools + + + System + 系统 + + + + Round up for .5 and above + 缩放至x.5倍 + + + + Always round up + 总是放大 + + + + Always round down + 总是缩小 + + + + Round up for .75 and above + 缩放至x.75倍 + + + + Don't round + 不缩放 + + + + Need to Reboot + 需要重启 + + + + The operation need to reboot to effected, reboot the application now? + 该操作需要重启软件生效，立即重启软件吗？ + + +