diff --git a/examples/v7-usb-device/main/msc-sd/msc_only_sd.cpp b/examples/v7-usb-device/main/msc-sd/msc_only_sd.cpp new file mode 100644 index 00000000..3f3a5b36 --- /dev/null +++ b/examples/v7-usb-device/main/msc-sd/msc_only_sd.cpp @@ -0,0 +1,511 @@ +/* + * Original MSC code: 2022-2023 Espressif Systems (Shanghai) CO LTD + * Adapted to open images and render them with epdiy displays: Fasani Corp. + * Please check original Readme in their tinyusb examples for MSC: + * https://github.com/espressif/esp-idf/tree/master/examples/peripherals/usb/device/tusb_msc + * + * + * IMPORTANT: Using flash SPI to save / read files is slow and it's actually not working correctly in this + * example. I can see only the first 20Kb or so from the image rendered. + * An SD Card should be used to get the proper speed IMHO. + */ + +/* DESCRIPTION: + * This example contains code to make ESP32-S3 based device recognizable by USB-hosts as a USB Mass Storage Device. + * It either allows the embedded application i.e. example to access the partition or Host PC accesses the partition over USB MSC. + * They can't be allowed to access the partition at the same time. + * For different scenarios and behaviour, Refer to README of this example. + * All images should be placed in the root of SDCard and be valid, non-progressive, JPG images + * This example uses a JPEG decoder from Larry Bank + */ + + +// Gallery mode will loop through all JPG images in the SDCard +#define GALLERY_MODE true +// Seconds wait till reading next picture +#define GALLERY_WAIT_SEC 5 +// Clean mode will do a full clean refresh before loading a new image (slower) +#define GALLERY_CLEAN_MODE false + +#define FRONT_LIGHT_ENABLE true +#define FL_PWM GPIO_NUM_11 + +#define LV_TICK_PERIOD_MS 1 +#define LEDC_TIMER LEDC_TIMER_0 +#define LEDC_MODE LEDC_LOW_SPEED_MODE +#define LEDC_OUTPUT_IO (11) // Define the output GPIO +#define LEDC_CHANNEL LEDC_CHANNEL_0 +#define LEDC_DUTY_RES LEDC_TIMER_13_BIT // Set duty resolution to 13 bits +#define LEDC_DUTY (2096) // 4096 Set duty to 50%. (2 ** 13) * 50% = 4096 +#define LEDC_FREQUENCY (4000) // Frequency in Hertz. Set frequency at 4 kHz + + +#include +#include +#include "esp_timer.h" +#include "esp_console.h" +#include "esp_check.h" +#include "driver/gpio.h" +#include "tinyusb.h" +#include "tusb_msc_storage.h" +// GPIO & PWM control of front-light +#include "driver/gpio.h" +#include "driver/ledc.h" + +#ifdef CONFIG_EXAMPLE_STORAGE_MEDIA_SDMMCCARD +#include "diskio_impl.h" +#include "diskio_sdmmc.h" +#endif +#include // round + pow + +// epdiy +extern "C" { + void app_main(); +} +int temperature = 25; + +int cursor_x = 10; +int cursor_y = 30; + +// JPG decoder from @bitbank2 +#include "JPEGDEC.h" +JPEGDEC jpeg; +#define DEBUG_JPG_PAYLOAD false + +// EXPERIMENTAL: If JPEG_CPY_FRAMEBUFFER is true the JPG is decoded directly in EPD framebuffer +// On true it looses rotation. Experimental, does not work alright yet. Hint: +// Check if an uint16_t buffer can be copied in a uint8_t buffer directly +// NO COLOR SUPPORT on true! +#define JPEG_CPY_FRAMEBUFFER false +// Dither space allocation +uint8_t* dither_space; + +uint32_t time_decomp = 0; +uint32_t time_render = 0; + +static const char *TAG = "MSC example"; + +#define EPNUM_MSC 1 +#define TUSB_DESC_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_MSC_DESC_LEN) + +enum { + ITF_NUM_MSC = 0, + ITF_NUM_TOTAL +}; + +enum { + EDPT_CTRL_OUT = 0x00, + EDPT_CTRL_IN = 0x80, + + EDPT_MSC_OUT = 0x01, + EDPT_MSC_IN = 0x81, +}; + +static uint8_t const desc_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, TUSB_DESC_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EDPT_MSC_OUT, EDPT_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), +}; + +static tusb_desc_device_t descriptor_config = { + .bLength = sizeof(descriptor_config), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .idVendor = 0x303A, // This is Espressif VID. This needs to be changed according to Users / Customers + .idProduct = 0x4002, + .bcdDevice = 0x100, + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + .bNumConfigurations = 0x01 +}; + +static char const *string_desc_arr[] = { + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "epdiy USB Device", // 2: Product + "123456", // 3: Serials + "Example MSC", // 4. MSC +}; +/*********************************************************************** TinyUSB descriptors*/ + +#define BASE_PATH "/data" // base path to mount the partition + +#define PROMPT_STR CONFIG_IDF_TARGET +static int console_unmount(int argc, char **argv); +static int console_read(int argc, char **argv); +static int console_write(int argc, char **argv); +static int console_size(int argc, char **argv); +static int console_status(int argc, char **argv); +static int console_exit(int argc, char **argv); +const esp_console_cmd_t cmds[] = { + { + .command = "read", + .help = "read BASE_PATH/README.MD and print its contents", + .hint = NULL, + .func = &console_read, + }, + { + .command = "write", + .help = "create file BASE_PATH/README.MD if it does not exist", + .hint = NULL, + .func = &console_write, + }, + { + .command = "size", + .help = "show storage size and sector size", + .hint = NULL, + .func = &console_size, + }, + { + .command = "expose", + .help = "Expose Storage to Host", + .hint = NULL, + .func = &console_unmount, + }, + { + .command = "status", + .help = "Status of storage exposure over USB", + .hint = NULL, + .func = &console_status, + }, + { + .command = "exit", + .help = "exit from application", + .hint = NULL, + .func = &console_exit, + } +}; + + +void read_file(char * filename) { + char filepath[150]; + sprintf(filepath, "%s/%s", BASE_PATH, filename); + ESP_LOGI(TAG, "Opening file: %s", filepath); + + FILE* file = fopen(filepath, "r"); + + fseek(file, 0, SEEK_END); + int file_size = ftell(file); + fseek(file, 0, SEEK_SET); + } + +// mount the partition and show all the files in BASE_PATH +static void _mount(void) +{ + ESP_LOGI(TAG, "Mount storage..."); + ESP_ERROR_CHECK(tinyusb_msc_storage_mount(BASE_PATH)); + + // List all the files in this directory + ESP_LOGI(TAG, "\nls command output:"); + struct dirent *d; + DIR *dh = opendir(BASE_PATH); + if (!dh) { + if (errno == ENOENT) { + //If the directory is not found + ESP_LOGE(TAG, "Directory doesn't exist %s", BASE_PATH); + } else { + //If the directory is not readable then throw error and exit + ESP_LOGE(TAG, "Unable to read directory %s", BASE_PATH); + } + return; + } + + char strbuf[257]; + //epd_write_string(&FiraSans_20, "Directory listing:", &cursor_x, &cursor_y, fb, &font_props); + cursor_x = 10; + + int file_cnt = 0; + char selected_file[256]; + //While the next entry is not readable we will print directory files + while ((d = readdir(dh)) != NULL) { + if (strncmp(d->d_name, ".", 1) == 0) { + printf("%s not image, discarded\n", d->d_name); + continue; + } + file_cnt++; + if (file_cnt == 1) { + strcpy(selected_file, d->d_name); + printf("Opening: %s\n", selected_file); + } + + sprintf(strbuf, "%s", d->d_name); + cursor_x = 10; + } + +} + +void gallery_mode() { + struct dirent *d; + //While the next entry is not readable we will read each image + while(true) { + DIR *dh = opendir(BASE_PATH); + if (!dh) { + if (errno == ENOENT) { + ESP_LOGE(TAG, "Directory doesn't exist %s", BASE_PATH); + } else { + //If the directory is not readable then throw error and exit + ESP_LOGE(TAG, "Unable to read directory %s", BASE_PATH); + } + return; + } + // Loop through each image + while ((d = readdir(dh)) != NULL) { + if (strncmp(d->d_name, ".", 1) == 0) { + printf("%s not image, discarded\n", d->d_name); + continue; + } + read_file(d->d_name); + + for (int duty=100; duty<8000; duty+=250) { + ledc_set_duty(LEDC_MODE, LEDC_CHANNEL, duty); + ledc_update_duty(LEDC_MODE, LEDC_CHANNEL); + vTaskDelay(pdMS_TO_TICKS(100)); + } + + vTaskDelay(pdMS_TO_TICKS(GALLERY_WAIT_SEC *1000)); + ledc_set_duty(LEDC_MODE, LEDC_CHANNEL, 0); + ledc_update_duty(LEDC_MODE, LEDC_CHANNEL); + + } + } +} + +// unmount storage +static int console_unmount(int argc, char **argv) +{ + if (tinyusb_msc_storage_in_use_by_usb_host()) { + ESP_LOGE(TAG, "storage is already exposed"); + return -1; + } + ESP_LOGI(TAG, "Unmount storage..."); + ESP_ERROR_CHECK(tinyusb_msc_storage_unmount()); + return 0; +} + +// read BASE_PATH/README.MD and print its contents +static int console_read(int argc, char **argv) +{ + if (tinyusb_msc_storage_in_use_by_usb_host()) { + ESP_LOGE(TAG, "storage exposed over USB. Application can't read from storage."); + return -1; + } + ESP_LOGD(TAG, "read from storage:"); + const char *filename = BASE_PATH "/README.MD"; + FILE *ptr = fopen(filename, "r"); + if (ptr == NULL) { + ESP_LOGE(TAG, "Filename not present - %s", filename); + return -1; + } + char buf[1024]; + while (fgets(buf, 1000, ptr) != NULL) { + printf("%s", buf); + } + fclose(ptr); + return 0; +} + +// create file BASE_PATH/README.MD if it does not exist +static int console_write(int argc, char **argv) +{ + if (tinyusb_msc_storage_in_use_by_usb_host()) { + ESP_LOGE(TAG, "storage exposed over USB. Application can't write to storage."); + return -1; + } + ESP_LOGD(TAG, "write to storage:"); + const char *filename = BASE_PATH "/README.MD"; + FILE *fd = fopen(filename, "r"); + if (!fd) { + ESP_LOGW(TAG, "README.MD doesn't exist yet, creating"); + fd = fopen(filename, "w"); + fprintf(fd, "Mass Storage Devices are one of the most common USB devices. It use Mass Storage Class (MSC) that allow access to their internal data storage.\n"); + fprintf(fd, "In this example, ESP chip will be recognised by host (PC) as Mass Storage Device.\n"); + fprintf(fd, "Upon connection to USB host (PC), the example application will initialize the storage module and then the storage will be seen as removable device on PC.\n"); + fclose(fd); + } + return 0; +} + +// Show storage size and sector size +static int console_size(int argc, char **argv) +{ + if (tinyusb_msc_storage_in_use_by_usb_host()) { + ESP_LOGE(TAG, "storage exposed over USB. Application can't access storage"); + return -1; + } + uint32_t sec_count = tinyusb_msc_storage_get_sector_count(); + uint32_t sec_size = tinyusb_msc_storage_get_sector_size(); + printf("Storage Capacity %lluMB\n", ((uint64_t) sec_count) * sec_size / (1024 * 1024)); + return 0; +} + +// exit from application +static int console_status(int argc, char **argv) +{ + printf("storage exposed over USB: %s\n", tinyusb_msc_storage_in_use_by_usb_host() ? "Yes" : "No"); + return 0; +} + +// exit from application +static int console_exit(int argc, char **argv) +{ + tinyusb_msc_storage_deinit(); + printf("Application Exiting\n"); + exit(0); + return 0; +} + +#ifdef CONFIG_EXAMPLE_STORAGE_MEDIA_SPIFLASH +static esp_err_t storage_init_spiflash(wl_handle_t *wl_handle) +{ + ESP_LOGI(TAG, "Initializing wear levelling"); + + const esp_partition_t *data_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_FAT, NULL); + if (data_partition == NULL) { + ESP_LOGE(TAG, "Failed to find FATFS partition. Check the partition table."); + return ESP_ERR_NOT_FOUND; + } + + return wl_mount(data_partition, wl_handle); +} +#else // CONFIG_EXAMPLE_STORAGE_MEDIA_SPIFLASH +static esp_err_t storage_init_sdmmc(sdmmc_card_t **card) +{ + esp_err_t ret = ESP_OK; + bool host_init = false; + sdmmc_card_t *sd_card; + + ESP_LOGI(TAG, "Initializing SDCard"); + + // By default, SD card frequency is initialized to SDMMC_FREQ_DEFAULT (20MHz) + // For setting a specific frequency, use host.max_freq_khz (range 400kHz - 40MHz for SDMMC) + // Example: for fixed frequency of 10MHz, use host.max_freq_khz = 10000; + sdmmc_host_t host = SDMMC_HOST_DEFAULT(); + + // This initializes the slot without card detect (CD) and write protect (WP) signals. + // Modify slot_config.gpio_cd and slot_config.gpio_wp if your board has these signals. + sdmmc_slot_config_t slot_config = SDMMC_SLOT_CONFIG_DEFAULT(); + + // For SD Card, set bus width to use +#ifdef CONFIG_EXAMPLE_SDMMC_BUS_WIDTH_4 + slot_config.width = 4; +#else + slot_config.width = 1; +#endif // CONFIG_EXAMPLE_SDMMC_BUS_WIDTH_4 + + // On chips where the GPIOs used for SD card can be configured, set the user defined values +#ifdef CONFIG_SOC_SDMMC_USE_GPIO_MATRIX + slot_config.clk = (gpio_num_t)CONFIG_EXAMPLE_PIN_CLK; + slot_config.cmd = (gpio_num_t)CONFIG_EXAMPLE_PIN_CMD; + slot_config.d0 = (gpio_num_t)CONFIG_EXAMPLE_PIN_D0; +#ifdef CONFIG_EXAMPLE_SDMMC_BUS_WIDTH_4 + slot_config.d1 = (gpio_num_t)CONFIG_EXAMPLE_PIN_D1; + slot_config.d2 = (gpio_num_t)CONFIG_EXAMPLE_PIN_D2; + slot_config.d3 = (gpio_num_t)CONFIG_EXAMPLE_PIN_D3; +#endif // CONFIG_EXAMPLE_SDMMC_BUS_WIDTH_4 + +#endif // CONFIG_SOC_SDMMC_USE_GPIO_MATRIX + + // Enable internal pullups on enabled pins. The internal pullups + // are insufficient however, please make sure 10k external pullups are + // connected on the bus. This is for debug / example purpose only. + slot_config.flags |= SDMMC_SLOT_FLAG_INTERNAL_PULLUP; + + // not using ff_memalloc here, as allocation in internal RAM is preferred + sd_card = (sdmmc_card_t *)malloc(sizeof(sdmmc_card_t)); + ESP_GOTO_ON_FALSE(sd_card, ESP_ERR_NO_MEM, clean, TAG, "could not allocate new sdmmc_card_t"); + + ESP_GOTO_ON_ERROR((*host.init)(), clean, TAG, "Host Config Init fail"); + host_init = true; + + ESP_GOTO_ON_ERROR(sdmmc_host_init_slot(host.slot, (const sdmmc_slot_config_t *) &slot_config), + clean, TAG, "Host init slot fail"); + + while (sdmmc_card_init(&host, sd_card)) { + ESP_LOGE(TAG, "The detection pin of the slot is disconnected(Insert uSD card). Retrying..."); + vTaskDelay(pdMS_TO_TICKS(3000)); + } + + // Card has been initialized, print its properties + sdmmc_card_print_info(stdout, sd_card); + *card = sd_card; + + return ESP_OK; + +clean: + if (host_init) { + if (host.flags & SDMMC_HOST_FLAG_DEINIT_ARG) { + host.deinit_p(host.slot); + } else { + (*host.deinit)(); + } + } + if (sd_card) { + free(sd_card); + sd_card = NULL; + } + return ret; +} +#endif // CONFIG_EXAMPLE_STORAGE_MEDIA_SPIFLASH + +void app_main(void) +{ + vTaskDelay(pdMS_TO_TICKS(500)); + + ESP_LOGI(TAG, "Initializing storage..."); + +#ifdef CONFIG_EXAMPLE_STORAGE_MEDIA_SPIFLASH + static wl_handle_t wl_handle = WL_INVALID_HANDLE; + ESP_ERROR_CHECK(storage_init_spiflash(&wl_handle)); + + const tinyusb_msc_spiflash_config_t config_spi = { + .wl_handle = wl_handle + }; + ESP_ERROR_CHECK(tinyusb_msc_storage_init_spiflash(&config_spi)); +#else // SD + static sdmmc_card_t *card = NULL; + ESP_ERROR_CHECK(storage_init_sdmmc(&card)); + + const tinyusb_msc_sdmmc_config_t config_sdmmc = { + .card = card + }; + ESP_ERROR_CHECK(tinyusb_msc_storage_init_sdmmc(&config_sdmmc)); +#endif + + _mount(); + /* if (GALLERY_MODE) { + gallery_mode(); + } */ + + ESP_LOGI(TAG, "USB MSC initialization"); + const tinyusb_config_t tusb_cfg = { + .device_descriptor = &descriptor_config, + .string_descriptor = string_desc_arr, + .string_descriptor_count = sizeof(string_desc_arr) / sizeof(string_desc_arr[0]), + .external_phy = false, + .configuration_descriptor = desc_configuration, + }; + ESP_ERROR_CHECK(tinyusb_driver_install(&tusb_cfg)); + ESP_LOGI(TAG, "USB MSC initialization DONE"); + + esp_console_repl_t *repl = NULL; + esp_console_repl_config_t repl_config = ESP_CONSOLE_REPL_CONFIG_DEFAULT(); + /* Prompt to be printed before each line. + * This can be customized, made dynamic, etc. + */ + repl_config.prompt = PROMPT_STR ">"; + repl_config.max_cmdline_length = 64; + esp_console_register_help_command(); + esp_console_dev_uart_config_t hw_config = ESP_CONSOLE_DEV_UART_CONFIG_DEFAULT(); + ESP_ERROR_CHECK(esp_console_new_repl_uart(&hw_config, &repl_config, &repl)); + for (int count = 0; count < sizeof(cmds) / sizeof(esp_console_cmd_t); count++) { + ESP_ERROR_CHECK( esp_console_cmd_register(&cmds[count]) ); + } + ESP_ERROR_CHECK(esp_console_start_repl(repl)); +} diff --git a/examples/v7-usb-device/sdk_matouch_480x480 b/examples/v7-usb-device/sdk_matouch_480x480 new file mode 100644 index 00000000..dc1d9c2e --- /dev/null +++ b/examples/v7-usb-device/sdk_matouch_480x480 @@ -0,0 +1,2070 @@ +# +# Automatically generated file. DO NOT EDIT. +# Espressif IoT Development Framework (ESP-IDF) 5.1.0 Project Configuration +# +CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000 +CONFIG_SOC_MPU_REGIONS_MAX_NUM=8 +CONFIG_SOC_ADC_SUPPORTED=y +CONFIG_SOC_UART_SUPPORTED=y +CONFIG_SOC_PCNT_SUPPORTED=y +CONFIG_SOC_WIFI_SUPPORTED=y +CONFIG_SOC_TWAI_SUPPORTED=y +CONFIG_SOC_GDMA_SUPPORTED=y +CONFIG_SOC_GPTIMER_SUPPORTED=y +CONFIG_SOC_LCDCAM_SUPPORTED=y +CONFIG_SOC_MCPWM_SUPPORTED=y +CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y +CONFIG_SOC_CACHE_SUPPORT_WRAP=y +CONFIG_SOC_ULP_SUPPORTED=y +CONFIG_SOC_ULP_FSM_SUPPORTED=y +CONFIG_SOC_RISCV_COPROC_SUPPORTED=y +CONFIG_SOC_BT_SUPPORTED=y +CONFIG_SOC_USB_OTG_SUPPORTED=y +CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED=y +CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y +CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED=y +CONFIG_SOC_SUPPORTS_SECURE_DL_MODE=y +CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD=y +CONFIG_SOC_SDMMC_HOST_SUPPORTED=y +CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y +CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y +CONFIG_SOC_RTC_MEM_SUPPORTED=y +CONFIG_SOC_PSRAM_DMA_CAPABLE=y +CONFIG_SOC_XT_WDT_SUPPORTED=y +CONFIG_SOC_I2S_SUPPORTED=y +CONFIG_SOC_RMT_SUPPORTED=y +CONFIG_SOC_SDM_SUPPORTED=y +CONFIG_SOC_GPSPI_SUPPORTED=y +CONFIG_SOC_LEDC_SUPPORTED=y +CONFIG_SOC_I2C_SUPPORTED=y +CONFIG_SOC_SYSTIMER_SUPPORTED=y +CONFIG_SOC_SUPPORT_COEXISTENCE=y +CONFIG_SOC_TEMP_SENSOR_SUPPORTED=y +CONFIG_SOC_AES_SUPPORTED=y +CONFIG_SOC_MPI_SUPPORTED=y +CONFIG_SOC_SHA_SUPPORTED=y +CONFIG_SOC_HMAC_SUPPORTED=y +CONFIG_SOC_DIG_SIGN_SUPPORTED=y +CONFIG_SOC_FLASH_ENC_SUPPORTED=y +CONFIG_SOC_SECURE_BOOT_SUPPORTED=y +CONFIG_SOC_MEMPROT_SUPPORTED=y +CONFIG_SOC_TOUCH_SENSOR_SUPPORTED=y +CONFIG_SOC_BOD_SUPPORTED=y +CONFIG_SOC_XTAL_SUPPORT_40M=y +CONFIG_SOC_APPCPU_HAS_CLOCK_GATING_BUG=y +CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y +CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y +CONFIG_SOC_ADC_ARBITER_SUPPORTED=y +CONFIG_SOC_ADC_DIG_IIR_FILTER_SUPPORTED=y +CONFIG_SOC_ADC_MONITOR_SUPPORTED=y +CONFIG_SOC_ADC_DMA_SUPPORTED=y +CONFIG_SOC_ADC_PERIPH_NUM=2 +CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10 +CONFIG_SOC_ADC_ATTEN_NUM=4 +CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2 +CONFIG_SOC_ADC_PATT_LEN_MAX=24 +CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=12 +CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12 +CONFIG_SOC_ADC_DIGI_RESULT_BYTES=4 +CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV=4 +CONFIG_SOC_ADC_DIGI_IIR_FILTER_NUM=2 +CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=83333 +CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=611 +CONFIG_SOC_ADC_RTC_MIN_BITWIDTH=12 +CONFIG_SOC_ADC_RTC_MAX_BITWIDTH=12 +CONFIG_SOC_ADC_CALIBRATION_V1_SUPPORTED=y +CONFIG_SOC_ADC_SELF_HW_CALI_SUPPORTED=y +CONFIG_SOC_APB_BACKUP_DMA=y +CONFIG_SOC_BROWNOUT_RESET_SUPPORTED=y +CONFIG_SOC_CACHE_WRITEBACK_SUPPORTED=y +CONFIG_SOC_CACHE_FREEZE_SUPPORTED=y +CONFIG_SOC_CPU_CORES_NUM=2 +CONFIG_SOC_CPU_INTR_NUM=32 +CONFIG_SOC_CPU_HAS_FPU=y +CONFIG_SOC_CPU_BREAKPOINTS_NUM=2 +CONFIG_SOC_CPU_WATCHPOINTS_NUM=2 +CONFIG_SOC_CPU_WATCHPOINT_SIZE=64 +CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=4096 +CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH=16 +CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US=1100 +CONFIG_SOC_GDMA_GROUPS=y +CONFIG_SOC_GDMA_PAIRS_PER_GROUP=5 +CONFIG_SOC_GDMA_SUPPORT_PSRAM=y +CONFIG_SOC_GPIO_PORT=1 +CONFIG_SOC_GPIO_PIN_COUNT=49 +CONFIG_SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER=y +CONFIG_SOC_GPIO_FILTER_CLK_SUPPORT_APB=y +CONFIG_SOC_GPIO_SUPPORT_RTC_INDEPENDENT=y +CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD=y +CONFIG_SOC_GPIO_VALID_GPIO_MASK=0x1FFFFFFFFFFFF +CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0x0001FFFFFC000000 +CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM=8 +CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM=8 +CONFIG_SOC_DEDIC_GPIO_OUT_AUTO_ENABLE=y +CONFIG_SOC_I2C_NUM=2 +CONFIG_SOC_I2C_FIFO_LEN=32 +CONFIG_SOC_I2C_CMD_REG_NUM=8 +CONFIG_SOC_I2C_SUPPORT_SLAVE=y +CONFIG_SOC_I2C_SUPPORT_HW_CLR_BUS=y +CONFIG_SOC_I2C_SUPPORT_XTAL=y +CONFIG_SOC_I2C_SUPPORT_RTC=y +CONFIG_SOC_I2S_NUM=2 +CONFIG_SOC_I2S_HW_VERSION_2=y +CONFIG_SOC_I2S_SUPPORTS_XTAL=y +CONFIG_SOC_I2S_SUPPORTS_PLL_F160M=y +CONFIG_SOC_I2S_SUPPORTS_PCM=y +CONFIG_SOC_I2S_SUPPORTS_PDM=y +CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y +CONFIG_SOC_I2S_PDM_MAX_TX_LINES=2 +CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y +CONFIG_SOC_I2S_PDM_MAX_RX_LINES=4 +CONFIG_SOC_I2S_SUPPORTS_TDM=y +CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y +CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK=y +CONFIG_SOC_LEDC_CHANNEL_NUM=8 +CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=14 +CONFIG_SOC_LEDC_SUPPORT_FADE_STOP=y +CONFIG_SOC_MCPWM_GROUPS=2 +CONFIG_SOC_MCPWM_TIMERS_PER_GROUP=3 +CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP=3 +CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR=2 +CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR=2 +CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR=2 +CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP=3 +CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP=y +CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER=3 +CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP=3 +CONFIG_SOC_MCPWM_SWSYNC_CAN_PROPAGATE=y +CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM=1 +CONFIG_SOC_MMU_PERIPH_NUM=1 +CONFIG_SOC_PCNT_GROUPS=1 +CONFIG_SOC_PCNT_UNITS_PER_GROUP=4 +CONFIG_SOC_PCNT_CHANNELS_PER_UNIT=2 +CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT=2 +CONFIG_SOC_RMT_GROUPS=1 +CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=4 +CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=4 +CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8 +CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=48 +CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG=y +CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION=y +CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP=y +CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT=y +CONFIG_SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP=y +CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO=y +CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY=y +CONFIG_SOC_RMT_SUPPORT_XTAL=y +CONFIG_SOC_RMT_SUPPORT_RC_FAST=y +CONFIG_SOC_RMT_SUPPORT_APB=y +CONFIG_SOC_RMT_SUPPORT_DMA=y +CONFIG_SOC_LCD_I80_SUPPORTED=y +CONFIG_SOC_LCD_RGB_SUPPORTED=y +CONFIG_SOC_LCD_I80_BUSES=1 +CONFIG_SOC_LCD_RGB_PANELS=1 +CONFIG_SOC_LCD_I80_BUS_WIDTH=16 +CONFIG_SOC_LCD_RGB_DATA_WIDTH=16 +CONFIG_SOC_LCD_SUPPORT_RGB_YUV_CONV=y +CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH=128 +CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=549 +CONFIG_SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH=128 +CONFIG_SOC_RTCIO_PIN_COUNT=22 +CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y +CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y +CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y +CONFIG_SOC_SDM_GROUPS=y +CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8 +CONFIG_SOC_SDM_CLK_SUPPORT_APB=y +CONFIG_SOC_SPI_PERIPH_NUM=3 +CONFIG_SOC_SPI_MAX_CS_NUM=6 +CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64 +CONFIG_SOC_SPI_SUPPORT_DDRCLK=y +CONFIG_SOC_SPI_SLAVE_SUPPORT_SEG_TRANS=y +CONFIG_SOC_SPI_SUPPORT_CD_SIG=y +CONFIG_SOC_SPI_SUPPORT_CONTINUOUS_TRANS=y +CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2=y +CONFIG_SOC_SPI_SUPPORT_CLK_APB=y +CONFIG_SOC_SPI_SUPPORT_CLK_XTAL=y +CONFIG_SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT=y +CONFIG_SOC_MEMSPI_IS_INDEPENDENT=y +CONFIG_SOC_SPI_MAX_PRE_DIVIDER=16 +CONFIG_SOC_SPI_SUPPORT_OCT=y +CONFIG_SOC_MEMSPI_SRC_FREQ_120M=y +CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y +CONFIG_SOC_SPIRAM_SUPPORTED=y +CONFIG_SOC_SPIRAM_XIP_SUPPORTED=y +CONFIG_SOC_SYSTIMER_COUNTER_NUM=2 +CONFIG_SOC_SYSTIMER_ALARM_NUM=3 +CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO=32 +CONFIG_SOC_SYSTIMER_BIT_WIDTH_HI=20 +CONFIG_SOC_SYSTIMER_FIXED_DIVIDER=y +CONFIG_SOC_SYSTIMER_INT_LEVEL=y +CONFIG_SOC_SYSTIMER_ALARM_MISS_COMPENSATE=y +CONFIG_SOC_TIMER_GROUPS=2 +CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2 +CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=54 +CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL=y +CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y +CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4 +CONFIG_SOC_TOUCH_VERSION_2=y +CONFIG_SOC_TOUCH_SENSOR_NUM=15 +CONFIG_SOC_TOUCH_PROXIMITY_CHANNEL_NUM=3 +CONFIG_SOC_TOUCH_PROXIMITY_MEAS_DONE_SUPPORTED=y +CONFIG_SOC_TOUCH_PAD_THRESHOLD_MAX=0x1FFFFF +CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX=0xFF +CONFIG_SOC_TWAI_CONTROLLER_NUM=1 +CONFIG_SOC_TWAI_CLK_SUPPORT_APB=y +CONFIG_SOC_TWAI_BRP_MIN=2 +CONFIG_SOC_TWAI_BRP_MAX=16384 +CONFIG_SOC_TWAI_SUPPORTS_RX_STATUS=y +CONFIG_SOC_UART_NUM=3 +CONFIG_SOC_UART_FIFO_LEN=128 +CONFIG_SOC_UART_BITRATE_MAX=5000000 +CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND=y +CONFIG_SOC_UART_SUPPORT_WAKEUP_INT=y +CONFIG_SOC_UART_SUPPORT_APB_CLK=y +CONFIG_SOC_UART_SUPPORT_RTC_CLK=y +CONFIG_SOC_UART_SUPPORT_XTAL_CLK=y +CONFIG_SOC_UART_REQUIRE_CORE_RESET=y +CONFIG_SOC_USB_PERIPH_NUM=y +CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE=3968 +CONFIG_SOC_SHA_SUPPORT_DMA=y +CONFIG_SOC_SHA_SUPPORT_RESUME=y +CONFIG_SOC_SHA_GDMA=y +CONFIG_SOC_SHA_SUPPORT_SHA1=y +CONFIG_SOC_SHA_SUPPORT_SHA224=y +CONFIG_SOC_SHA_SUPPORT_SHA256=y +CONFIG_SOC_SHA_SUPPORT_SHA384=y +CONFIG_SOC_SHA_SUPPORT_SHA512=y +CONFIG_SOC_SHA_SUPPORT_SHA512_224=y +CONFIG_SOC_SHA_SUPPORT_SHA512_256=y +CONFIG_SOC_SHA_SUPPORT_SHA512_T=y +CONFIG_SOC_RSA_MAX_BIT_LEN=4096 +CONFIG_SOC_AES_SUPPORT_DMA=y +CONFIG_SOC_AES_GDMA=y +CONFIG_SOC_AES_SUPPORT_AES_128=y +CONFIG_SOC_AES_SUPPORT_AES_256=y +CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_BT_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_CPU_PD=y +CONFIG_SOC_PM_SUPPORT_TAGMEM_PD=y +CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD=y +CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y +CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y +CONFIG_SOC_PM_SUPPORT_MAC_BB_PD=y +CONFIG_SOC_PM_SUPPORT_MODEM_PD=y +CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y +CONFIG_SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY=y +CONFIG_SOC_PM_CPU_RETENTION_BY_RTCCNTL=y +CONFIG_SOC_PM_MODEM_RETENTION_BY_BACKUPDMA=y +CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y +CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y +CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y +CONFIG_SOC_CLK_XTAL32K_SUPPORTED=y +CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE=y +CONFIG_SOC_EFUSE_DIS_DOWNLOAD_DCACHE=y +CONFIG_SOC_EFUSE_HARD_DIS_JTAG=y +CONFIG_SOC_EFUSE_DIS_USB_JTAG=y +CONFIG_SOC_EFUSE_SOFT_DIS_JTAG=y +CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT=y +CONFIG_SOC_EFUSE_DIS_ICACHE=y +CONFIG_SOC_EFUSE_BLOCK9_KEY_PURPOSE_QUIRK=y +CONFIG_SOC_SECURE_BOOT_V2_RSA=y +CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=3 +CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS=y +CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY=y +CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=64 +CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES=y +CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_OPTIONS=y +CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128=y +CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_256=y +CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE=16 +CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE=256 +CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21 +CONFIG_SOC_MAC_BB_PD_MEM_SIZE=192 +CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH=12 +CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE=y +CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND=y +CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME=y +CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND=y +CONFIG_SOC_SPI_MEM_SUPPORT_OPI_MODE=y +CONFIG_SOC_SPI_MEM_SUPPORT_TIME_TUNING=y +CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y +CONFIG_SOC_SPI_MEM_SUPPORT_WRAP=y +CONFIG_SOC_COEX_HW_PTI=y +CONFIG_SOC_EXTERNAL_COEX_LEADER_TX_LINE=y +CONFIG_SOC_SDMMC_USE_GPIO_MATRIX=y +CONFIG_SOC_SDMMC_NUM_SLOTS=2 +CONFIG_SOC_SDMMC_SUPPORT_XTAL_CLOCK=y +CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC=y +CONFIG_SOC_WIFI_HW_TSF=y +CONFIG_SOC_WIFI_FTM_SUPPORT=y +CONFIG_SOC_WIFI_GCMP_SUPPORT=y +CONFIG_SOC_WIFI_WAPI_SUPPORT=y +CONFIG_SOC_WIFI_CSI_SUPPORT=y +CONFIG_SOC_WIFI_MESH_SUPPORT=y +CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW=y +CONFIG_SOC_BLE_SUPPORTED=y +CONFIG_SOC_BLE_MESH_SUPPORTED=y +CONFIG_SOC_BLE_50_SUPPORTED=y +CONFIG_SOC_BLE_DEVICE_PRIVACY_SUPPORTED=y +CONFIG_SOC_BLUFI_SUPPORTED=y +CONFIG_SOC_ULP_HAS_ADC=y +CONFIG_IDF_CMAKE=y +CONFIG_IDF_TARGET_ARCH_XTENSA=y +CONFIG_IDF_TARGET_ARCH="xtensa" +CONFIG_IDF_TARGET="esp32s3" +CONFIG_IDF_TARGET_ESP32S3=y +CONFIG_IDF_FIRMWARE_CHIP_ID=0x0009 + +# +# Build type +# +CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y +# CONFIG_APP_BUILD_TYPE_RAM is not set +CONFIG_APP_BUILD_GENERATE_BINARIES=y +CONFIG_APP_BUILD_BOOTLOADER=y +CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y +# CONFIG_APP_REPRODUCIBLE_BUILD is not set +# CONFIG_APP_NO_BLOBS is not set +# end of Build type + +# +# Bootloader config +# +CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x0 +CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set +CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y +# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set +CONFIG_BOOTLOADER_LOG_LEVEL=3 +CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y +# CONFIG_BOOTLOADER_FACTORY_RESET is not set +# CONFIG_BOOTLOADER_APP_TEST is not set +CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y +CONFIG_BOOTLOADER_WDT_ENABLE=y +# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set +CONFIG_BOOTLOADER_WDT_TIME_MS=9000 +# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set +CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0 +# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set +CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y +# end of Bootloader config + +# +# Security features +# +CONFIG_SECURE_BOOT_V2_RSA_SUPPORTED=y +CONFIG_SECURE_BOOT_V2_PREFERRED=y +# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set +# CONFIG_SECURE_BOOT is not set +# CONFIG_SECURE_FLASH_ENC_ENABLED is not set +CONFIG_SECURE_ROM_DL_MODE_ENABLED=y +# end of Security features + +# +# Application manager +# +CONFIG_APP_COMPILE_TIME_DATE=y +# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set +# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set +# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set +CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 +# end of Application manager + +CONFIG_ESP_ROM_HAS_CRC_LE=y +CONFIG_ESP_ROM_HAS_CRC_BE=y +CONFIG_ESP_ROM_HAS_MZ_CRC32=y +CONFIG_ESP_ROM_HAS_JPEG_DECODE=y +CONFIG_ESP_ROM_UART_CLK_IS_XTAL=y +CONFIG_ESP_ROM_HAS_RETARGETABLE_LOCKING=y +CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM=4 +CONFIG_ESP_ROM_HAS_ERASE_0_REGION_BUG=y +CONFIG_ESP_ROM_GET_CLK_FREQ=y +CONFIG_ESP_ROM_HAS_HAL_WDT=y +CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y +CONFIG_ESP_ROM_HAS_LAYOUT_TABLE=y +CONFIG_ESP_ROM_HAS_SPI_FLASH=y +CONFIG_ESP_ROM_HAS_ETS_PRINTF_BUG=y +CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT=y +CONFIG_ESP_ROM_NEEDS_SET_CACHE_MMU_SIZE=y +CONFIG_ESP_ROM_RAM_APP_NEEDS_MMU_INIT=y +CONFIG_ESP_ROM_HAS_FLASH_COUNT_PAGES_BUG=y +CONFIG_ESP_ROM_HAS_CACHE_SUSPEND_WAITI_BUG=y + +# +# Boot ROM Behavior +# +CONFIG_BOOT_ROM_LOG_ALWAYS_ON=y +# CONFIG_BOOT_ROM_LOG_ALWAYS_OFF is not set +# CONFIG_BOOT_ROM_LOG_ON_GPIO_HIGH is not set +# CONFIG_BOOT_ROM_LOG_ON_GPIO_LOW is not set +# end of Boot ROM Behavior + +# +# Serial flasher config +# +# CONFIG_ESPTOOLPY_NO_STUB is not set +# CONFIG_ESPTOOLPY_OCT_FLASH is not set +CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT=y +CONFIG_ESPTOOLPY_FLASHMODE_QIO=y +# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set +# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set +# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set +CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y +CONFIG_ESPTOOLPY_FLASHMODE="dio" +# CONFIG_ESPTOOLPY_FLASHFREQ_120M is not set +CONFIG_ESPTOOLPY_FLASHFREQ_80M=y +# CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set +# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set +CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT=y +CONFIG_ESPTOOLPY_FLASHFREQ="80m" +# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set +CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y +# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set +CONFIG_ESPTOOLPY_FLASHSIZE="4MB" +# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set +CONFIG_ESPTOOLPY_BEFORE_RESET=y +# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set +CONFIG_ESPTOOLPY_BEFORE="default_reset" +CONFIG_ESPTOOLPY_AFTER_RESET=y +# CONFIG_ESPTOOLPY_AFTER_NORESET is not set +CONFIG_ESPTOOLPY_AFTER="hard_reset" +CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 +# end of Serial flasher config + +# +# Partition Table +# +# CONFIG_PARTITION_TABLE_SINGLE_APP is not set +# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set +# CONFIG_PARTITION_TABLE_TWO_OTA is not set +CONFIG_PARTITION_TABLE_CUSTOM=y +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv" +CONFIG_PARTITION_TABLE_FILENAME="partitions.csv" +CONFIG_PARTITION_TABLE_OFFSET=0x8000 +CONFIG_PARTITION_TABLE_MD5=y +# end of Partition Table + +# +# USB Dev MSC Example Configuration +# +# CONFIG_EXAMPLE_STORAGE_MEDIA_SPIFLASH is not set +CONFIG_EXAMPLE_STORAGE_MEDIA_SDMMCCARD=y +# CONFIG_EXAMPLE_SDMMC_BUS_WIDTH_4 is not set +CONFIG_EXAMPLE_SDMMC_BUS_WIDTH_1=y +CONFIG_EXAMPLE_PIN_CMD=11 +CONFIG_EXAMPLE_PIN_CLK=12 +CONFIG_EXAMPLE_PIN_D0=13 +# end of USB Dev MSC Example Configuration + +# +# Compiler options +# +CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y +# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set +# CONFIG_COMPILER_OPTIMIZATION_PERF is not set +# CONFIG_COMPILER_OPTIMIZATION_NONE is not set +CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y +# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set +# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set +CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y +CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set +CONFIG_COMPILER_HIDE_PATHS_MACROS=y +# CONFIG_COMPILER_CXX_EXCEPTIONS is not set +# CONFIG_COMPILER_CXX_RTTI is not set +CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y +# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set +# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set +# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set +# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set +# CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set +# CONFIG_COMPILER_DUMP_RTL_FILES is not set +# end of Compiler options + +# +# Component config +# + +# +# Application Level Tracing +# +# CONFIG_APPTRACE_DEST_JTAG is not set +CONFIG_APPTRACE_DEST_NONE=y +# CONFIG_APPTRACE_DEST_UART1 is not set +# CONFIG_APPTRACE_DEST_UART2 is not set +# CONFIG_APPTRACE_DEST_USB_CDC is not set +CONFIG_APPTRACE_DEST_UART_NONE=y +CONFIG_APPTRACE_UART_TASK_PRIO=1 +CONFIG_APPTRACE_LOCK_ENABLE=y +# end of Application Level Tracing + +# +# Bluetooth +# +# CONFIG_BT_ENABLED is not set +# end of Bluetooth + +# +# Driver Configurations +# + +# +# Legacy ADC Configuration +# +# CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set + +# +# Legacy ADC Calibration Configuration +# +# CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN is not set +# end of Legacy ADC Calibration Configuration +# end of Legacy ADC Configuration + +# +# SPI Configuration +# +# CONFIG_SPI_MASTER_IN_IRAM is not set +CONFIG_SPI_MASTER_ISR_IN_IRAM=y +# CONFIG_SPI_SLAVE_IN_IRAM is not set +CONFIG_SPI_SLAVE_ISR_IN_IRAM=y +# end of SPI Configuration + +# +# TWAI Configuration +# +# CONFIG_TWAI_ISR_IN_IRAM is not set +CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y +# end of TWAI Configuration + +# +# Temperature sensor Configuration +# +# CONFIG_TEMP_SENSOR_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_TEMP_SENSOR_ENABLE_DEBUG_LOG is not set +# end of Temperature sensor Configuration + +# +# UART Configuration +# +# CONFIG_UART_ISR_IN_IRAM is not set +# end of UART Configuration + +# +# GPIO Configuration +# +# CONFIG_GPIO_CTRL_FUNC_IN_IRAM is not set +# end of GPIO Configuration + +# +# Sigma Delta Modulator Configuration +# +# CONFIG_SDM_CTRL_FUNC_IN_IRAM is not set +# CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_SDM_ENABLE_DEBUG_LOG is not set +# end of Sigma Delta Modulator Configuration + +# +# GPTimer Configuration +# +# CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set +# CONFIG_GPTIMER_ISR_IRAM_SAFE is not set +# CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set +# end of GPTimer Configuration + +# +# PCNT Configuration +# +# CONFIG_PCNT_CTRL_FUNC_IN_IRAM is not set +# CONFIG_PCNT_ISR_IRAM_SAFE is not set +# CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_PCNT_ENABLE_DEBUG_LOG is not set +# end of PCNT Configuration + +# +# RMT Configuration +# +# CONFIG_RMT_ISR_IRAM_SAFE is not set +# CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_RMT_ENABLE_DEBUG_LOG is not set +# end of RMT Configuration + +# +# MCPWM Configuration +# +# CONFIG_MCPWM_ISR_IRAM_SAFE is not set +# CONFIG_MCPWM_CTRL_FUNC_IN_IRAM is not set +# CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_MCPWM_ENABLE_DEBUG_LOG is not set +# end of MCPWM Configuration + +# +# I2S Configuration +# +# CONFIG_I2S_ISR_IRAM_SAFE is not set +# CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_I2S_ENABLE_DEBUG_LOG is not set +# end of I2S Configuration + +# +# USB Serial/JTAG Configuration +# +# end of USB Serial/JTAG Configuration +# end of Driver Configurations + +# +# eFuse Bit Manager +# +# CONFIG_EFUSE_CUSTOM_TABLE is not set +# CONFIG_EFUSE_VIRTUAL is not set +CONFIG_EFUSE_MAX_BLK_LEN=256 +# end of eFuse Bit Manager + +# +# ESP-TLS +# +CONFIG_ESP_TLS_USING_MBEDTLS=y +CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y +# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set +# CONFIG_ESP_TLS_SERVER is not set +# CONFIG_ESP_TLS_PSK_VERIFICATION is not set +# CONFIG_ESP_TLS_INSECURE is not set +# end of ESP-TLS + +# +# ADC and ADC Calibration +# +# CONFIG_ADC_ONESHOT_CTRL_FUNC_IN_IRAM is not set +# CONFIG_ADC_CONTINUOUS_ISR_IRAM_SAFE is not set +# CONFIG_ADC_CONTINUOUS_FORCE_USE_ADC2_ON_C3_S3 is not set +# end of ADC and ADC Calibration + +# +# Wireless Coexistence +# +# CONFIG_ESP_COEX_EXTERNAL_COEXIST_ENABLE is not set +# end of Wireless Coexistence + +# +# Common ESP-related +# +CONFIG_ESP_ERR_TO_NAME_LOOKUP=y +# end of Common ESP-related + +# +# Ethernet +# +CONFIG_ETH_ENABLED=y +CONFIG_ETH_USE_SPI_ETHERNET=y +# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set +# CONFIG_ETH_SPI_ETHERNET_W5500 is not set +# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set +# CONFIG_ETH_USE_OPENETH is not set +# CONFIG_ETH_TRANSMIT_MUTEX is not set +# end of Ethernet + +# +# Event Loop Library +# +# CONFIG_ESP_EVENT_LOOP_PROFILING is not set +CONFIG_ESP_EVENT_POST_FROM_ISR=y +CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y +# end of Event Loop Library + +# +# GDB Stub +# +# end of GDB Stub + +# +# ESP HTTP client +# +CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y +# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set +# CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH is not set +# end of ESP HTTP client + +# +# HTTP Server +# +CONFIG_HTTPD_MAX_REQ_HDR_LEN=512 +CONFIG_HTTPD_MAX_URI_LEN=512 +CONFIG_HTTPD_ERR_RESP_NO_DELAY=y +CONFIG_HTTPD_PURGE_BUF_LEN=32 +# CONFIG_HTTPD_LOG_PURGE_DATA is not set +# CONFIG_HTTPD_WS_SUPPORT is not set +# CONFIG_HTTPD_QUEUE_WORK_BLOCKING is not set +# end of HTTP Server + +# +# ESP HTTPS OTA +# +# CONFIG_ESP_HTTPS_OTA_DECRYPT_CB is not set +# CONFIG_ESP_HTTPS_OTA_ALLOW_HTTP is not set +# end of ESP HTTPS OTA + +# +# ESP HTTPS server +# +# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set +# end of ESP HTTPS server + +# +# Hardware Settings +# + +# +# Chip revision +# +CONFIG_ESP32S3_REV_MIN_0=y +# CONFIG_ESP32S3_REV_MIN_1 is not set +# CONFIG_ESP32S3_REV_MIN_2 is not set +CONFIG_ESP32S3_REV_MIN_FULL=0 +CONFIG_ESP_REV_MIN_FULL=0 + +# +# Maximum Supported ESP32-S3 Revision (Rev v0.99) +# +CONFIG_ESP32S3_REV_MAX_FULL=99 +CONFIG_ESP_REV_MAX_FULL=99 +# end of Chip revision + +# +# MAC Config +# +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y +CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR=y +# CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_TWO is not set +CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_FOUR=y +CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES=4 +# end of MAC Config + +# +# Sleep Config +# +CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y +CONFIG_ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND=y +CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU=y +CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y +CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND=y +CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY=2000 +# end of Sleep Config + +# +# RTC Clock Config +# +CONFIG_RTC_CLK_SRC_INT_RC=y +# CONFIG_RTC_CLK_SRC_EXT_CRYS is not set +# CONFIG_RTC_CLK_SRC_EXT_OSC is not set +# CONFIG_RTC_CLK_SRC_INT_8MD256 is not set +CONFIG_RTC_CLK_CAL_CYCLES=1024 +# end of RTC Clock Config + +# +# Peripheral Control +# +CONFIG_PERIPH_CTRL_FUNC_IN_IRAM=y +# end of Peripheral Control + +# +# GDMA Configuration +# +# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set +# CONFIG_GDMA_ISR_IRAM_SAFE is not set +# end of GDMA Configuration + +# +# Main XTAL Config +# +CONFIG_XTAL_FREQ_40=y +CONFIG_XTAL_FREQ=40 +# end of Main XTAL Config +# end of Hardware Settings + +# +# LCD and Touch Panel +# + +# +# LCD Touch Drivers are maintained in the IDF Component Registry +# + +# +# LCD Peripheral Configuration +# +CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32 +# CONFIG_LCD_ENABLE_DEBUG_LOG is not set +# CONFIG_LCD_RGB_ISR_IRAM_SAFE is not set +# CONFIG_LCD_RGB_RESTART_IN_VSYNC is not set +# end of LCD Peripheral Configuration +# end of LCD and Touch Panel + +# +# ESP NETIF Adapter +# +CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120 +CONFIG_ESP_NETIF_TCPIP_LWIP=y +# CONFIG_ESP_NETIF_LOOPBACK is not set +CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y +# CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set +# CONFIG_ESP_NETIF_L2_TAP is not set +# CONFIG_ESP_NETIF_BRIDGE_EN is not set +# end of ESP NETIF Adapter + +# +# Partition API Configuration +# +# end of Partition API Configuration + +# +# PHY +# +CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP_PHY_MAX_TX_POWER=20 +# CONFIG_ESP_PHY_REDUCE_TX_POWER is not set +CONFIG_ESP_PHY_ENABLE_USB=y +# CONFIG_ESP_PHY_ENABLE_CERT_TEST is not set +CONFIG_ESP_PHY_RF_CAL_PARTIAL=y +# CONFIG_ESP_PHY_RF_CAL_NONE is not set +# CONFIG_ESP_PHY_RF_CAL_FULL is not set +CONFIG_ESP_PHY_CALIBRATION_MODE=0 +# end of PHY + +# +# Power Management +# +# CONFIG_PM_ENABLE is not set +CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y +CONFIG_PM_POWER_DOWN_TAGMEM_IN_LIGHT_SLEEP=y +# end of Power Management + +# +# ESP PSRAM +# +CONFIG_SPIRAM=y + +# +# SPI RAM config +# +# CONFIG_SPIRAM_MODE_QUAD is not set +CONFIG_SPIRAM_MODE_OCT=y +CONFIG_SPIRAM_TYPE_AUTO=y +# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set +CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY=y +CONFIG_SPIRAM_CLK_IO=30 +CONFIG_SPIRAM_CS_IO=26 +# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set +# CONFIG_SPIRAM_RODATA is not set +CONFIG_SPIRAM_SPEED_120M=y +# CONFIG_SPIRAM_SPEED_80M is not set +# CONFIG_SPIRAM_SPEED_40M is not set +CONFIG_SPIRAM_SPEED=120 +CONFIG_SPIRAM_BOOT_INIT=y +# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set +# CONFIG_SPIRAM_USE_MEMMAP is not set +# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set +CONFIG_SPIRAM_USE_MALLOC=y +CONFIG_SPIRAM_MEMTEST=y +CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=6384 +# CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP is not set +CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768 +# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set +# CONFIG_SPIRAM_ECC_ENABLE is not set +# end of SPI RAM config +# end of ESP PSRAM + +# +# ESP Ringbuf +# +# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set +# end of ESP Ringbuf + +# +# ESP System Settings +# +# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set +# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160 is not set +CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240=y +CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=240 + +# +# Cache config +# +CONFIG_ESP32S3_INSTRUCTION_CACHE_16KB=y +# CONFIG_ESP32S3_INSTRUCTION_CACHE_32KB is not set +CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE=0x4000 +# CONFIG_ESP32S3_INSTRUCTION_CACHE_4WAYS is not set +CONFIG_ESP32S3_INSTRUCTION_CACHE_8WAYS=y +CONFIG_ESP32S3_ICACHE_ASSOCIATED_WAYS=8 +# CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_16B is not set +CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_32B=y +CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_SIZE=32 +# CONFIG_ESP32S3_DATA_CACHE_16KB is not set +CONFIG_ESP32S3_DATA_CACHE_32KB=y +# CONFIG_ESP32S3_DATA_CACHE_64KB is not set +CONFIG_ESP32S3_DATA_CACHE_SIZE=0x8000 +# CONFIG_ESP32S3_DATA_CACHE_4WAYS is not set +CONFIG_ESP32S3_DATA_CACHE_8WAYS=y +CONFIG_ESP32S3_DCACHE_ASSOCIATED_WAYS=8 +# CONFIG_ESP32S3_DATA_CACHE_LINE_16B is not set +# CONFIG_ESP32S3_DATA_CACHE_LINE_32B is not set +CONFIG_ESP32S3_DATA_CACHE_LINE_64B=y +CONFIG_ESP32S3_DATA_CACHE_LINE_SIZE=64 +# end of Cache config + +# +# Memory +# +# CONFIG_ESP32S3_RTCDATA_IN_FAST_MEM is not set +# CONFIG_ESP32S3_USE_FIXED_STATIC_RAM_SIZE is not set +# end of Memory + +# +# Trace memory +# +# CONFIG_ESP32S3_TRAX is not set +CONFIG_ESP32S3_TRACEMEM_RESERVE_DRAM=0x0 +# end of Trace memory + +# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set +CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y +# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set +# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set +# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set +CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS=0 +CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK=y +CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP=y + +# +# Memory protection +# +CONFIG_ESP_SYSTEM_MEMPROT_FEATURE=y +CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK=y +# end of Memory protection + +CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584 +CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y +# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set +# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set +CONFIG_ESP_MAIN_TASK_AFFINITY=0x0 +CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 +CONFIG_ESP_CONSOLE_UART_DEFAULT=y +# CONFIG_ESP_CONSOLE_USB_CDC is not set +# CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG is not set +# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set +# CONFIG_ESP_CONSOLE_NONE is not set +# CONFIG_ESP_CONSOLE_SECONDARY_NONE is not set +CONFIG_ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG=y +CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG_ENABLED=y +CONFIG_ESP_CONSOLE_UART=y +CONFIG_ESP_CONSOLE_MULTIPLE_UART=y +CONFIG_ESP_CONSOLE_UART_NUM=0 +CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 +CONFIG_ESP_INT_WDT=y +CONFIG_ESP_INT_WDT_TIMEOUT_MS=300 +CONFIG_ESP_INT_WDT_CHECK_CPU1=y +CONFIG_ESP_TASK_WDT_EN=y +CONFIG_ESP_TASK_WDT_INIT=y +# CONFIG_ESP_TASK_WDT_PANIC is not set +CONFIG_ESP_TASK_WDT_TIMEOUT_S=5 +CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y +CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y +# CONFIG_ESP_PANIC_HANDLER_IRAM is not set +# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set +CONFIG_ESP_DEBUG_OCDAWARE=y +CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y + +# +# Brownout Detector +# +CONFIG_ESP_BROWNOUT_DET=y +CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7=y +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_1 is not set +CONFIG_ESP_BROWNOUT_DET_LVL=7 +# end of Brownout Detector + +CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y +# end of ESP System Settings + +# +# IPC (Inter-Processor Call) +# +CONFIG_ESP_IPC_TASK_STACK_SIZE=1280 +CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y +CONFIG_ESP_IPC_ISR_ENABLE=y +# end of IPC (Inter-Processor Call) + +# +# High resolution timer (esp_timer) +# +# CONFIG_ESP_TIMER_PROFILING is not set +CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y +CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y +CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584 +CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1 +# CONFIG_ESP_TIMER_SHOW_EXPERIMENTAL is not set +CONFIG_ESP_TIMER_TASK_AFFINITY=0x0 +CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0=y +CONFIG_ESP_TIMER_ISR_AFFINITY=0x1 +CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0=y +# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set +CONFIG_ESP_TIMER_IMPL_SYSTIMER=y +# end of High resolution timer (esp_timer) + +# +# Wi-Fi +# +CONFIG_ESP_WIFI_ENABLED=y +CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=10 +CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32 +CONFIG_ESP_WIFI_STATIC_TX_BUFFER=y +CONFIG_ESP_WIFI_TX_BUFFER_TYPE=0 +CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM=16 +CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM=32 +# CONFIG_ESP_WIFI_CSI_ENABLED is not set +CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y +CONFIG_ESP_WIFI_TX_BA_WIN=6 +CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP_WIFI_RX_BA_WIN=6 +# CONFIG_ESP_WIFI_AMSDU_TX_ENABLED is not set +CONFIG_ESP_WIFI_NVS_ENABLED=y +CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y +# CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set +CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN=752 +CONFIG_ESP_WIFI_MGMT_SBUF_NUM=32 +CONFIG_ESP_WIFI_IRAM_OPT=y +CONFIG_ESP_WIFI_RX_IRAM_OPT=y +CONFIG_ESP_WIFI_ENABLE_WPA3_SAE=y +CONFIG_ESP_WIFI_ENABLE_SAE_PK=y +CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT=y +CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA=y +# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set +# CONFIG_ESP_WIFI_FTM_ENABLE is not set +CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE=y +# CONFIG_ESP_WIFI_GCMP_SUPPORT is not set +# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set +CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y +# CONFIG_ESP_WIFI_SLP_BEACON_LOST_OPT is not set +CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM=7 +CONFIG_ESP_WIFI_MBEDTLS_CRYPTO=y +CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT=y +# CONFIG_ESP_WIFI_WAPI_PSK is not set +# CONFIG_ESP_WIFI_SUITE_B_192 is not set +# CONFIG_ESP_WIFI_11KV_SUPPORT is not set +# CONFIG_ESP_WIFI_MBO_SUPPORT is not set +# CONFIG_ESP_WIFI_DPP_SUPPORT is not set +# CONFIG_ESP_WIFI_11R_SUPPORT is not set +# CONFIG_ESP_WIFI_WPS_SOFTAP_REGISTRAR is not set + +# +# WPS Configuration Options +# +# CONFIG_ESP_WIFI_WPS_STRICT is not set +# CONFIG_ESP_WIFI_WPS_PASSPHRASE is not set +# end of WPS Configuration Options + +# CONFIG_ESP_WIFI_DEBUG_PRINT is not set +# CONFIG_ESP_WIFI_TESTING_OPTIONS is not set +# end of Wi-Fi + +# +# Core dump +# +# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set +# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set +CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y +# end of Core dump + +# +# FAT Filesystem support +# +CONFIG_FATFS_VOLUME_COUNT=2 +# CONFIG_FATFS_LFN_NONE is not set +CONFIG_FATFS_LFN_HEAP=y +# CONFIG_FATFS_LFN_STACK is not set +# CONFIG_FATFS_SECTOR_512 is not set +CONFIG_FATFS_SECTOR_4096=y +# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set +CONFIG_FATFS_CODEPAGE_437=y +# CONFIG_FATFS_CODEPAGE_720 is not set +# CONFIG_FATFS_CODEPAGE_737 is not set +# CONFIG_FATFS_CODEPAGE_771 is not set +# CONFIG_FATFS_CODEPAGE_775 is not set +# CONFIG_FATFS_CODEPAGE_850 is not set +# CONFIG_FATFS_CODEPAGE_852 is not set +# CONFIG_FATFS_CODEPAGE_855 is not set +# CONFIG_FATFS_CODEPAGE_857 is not set +# CONFIG_FATFS_CODEPAGE_860 is not set +# CONFIG_FATFS_CODEPAGE_861 is not set +# CONFIG_FATFS_CODEPAGE_862 is not set +# CONFIG_FATFS_CODEPAGE_863 is not set +# CONFIG_FATFS_CODEPAGE_864 is not set +# CONFIG_FATFS_CODEPAGE_865 is not set +# CONFIG_FATFS_CODEPAGE_866 is not set +# CONFIG_FATFS_CODEPAGE_869 is not set +# CONFIG_FATFS_CODEPAGE_932 is not set +# CONFIG_FATFS_CODEPAGE_936 is not set +# CONFIG_FATFS_CODEPAGE_949 is not set +# CONFIG_FATFS_CODEPAGE_950 is not set +CONFIG_FATFS_CODEPAGE=437 +CONFIG_FATFS_MAX_LFN=255 +CONFIG_FATFS_API_ENCODING_ANSI_OEM=y +# CONFIG_FATFS_API_ENCODING_UTF_8 is not set +CONFIG_FATFS_FS_LOCK=0 +CONFIG_FATFS_TIMEOUT_MS=10000 +CONFIG_FATFS_PER_FILE_CACHE=y +CONFIG_FATFS_ALLOC_PREFER_EXTRAM=y +# CONFIG_FATFS_USE_FASTSEEK is not set +CONFIG_FATFS_VFS_FSTAT_BLKSIZE=0 +# end of FAT Filesystem support + +# +# FreeRTOS +# + +# +# Kernel +# +# CONFIG_FREERTOS_SMP is not set +# CONFIG_FREERTOS_UNICORE is not set +CONFIG_FREERTOS_HZ=100 +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set +CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y +CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 +CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536 +# CONFIG_FREERTOS_USE_IDLE_HOOK is not set +# CONFIG_FREERTOS_USE_TICK_HOOK is not set +CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 +# CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY is not set +CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1 +CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048 +CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10 +CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 +CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES=1 +# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set +# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set +# end of Kernel + +# +# Port +# +CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y +# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set +CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y +# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set +CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y +CONFIG_FREERTOS_ISR_STACKSIZE=1536 +CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y +CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y +CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y +# CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set +CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y +# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set +# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set +# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set +CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y +# end of Port + +CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y +CONFIG_FREERTOS_DEBUG_OCDAWARE=y +# end of FreeRTOS + +# +# Hardware Abstraction Layer (HAL) and Low Level (LL) +# +CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y +# CONFIG_HAL_ASSERTION_DISABLE is not set +# CONFIG_HAL_ASSERTION_SILENT is not set +# CONFIG_HAL_ASSERTION_ENABLE is not set +CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2 +CONFIG_HAL_WDT_USE_ROM_IMPL=y +CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y +CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y +# end of Hardware Abstraction Layer (HAL) and Low Level (LL) + +# +# Heap memory debugging +# +CONFIG_HEAP_POISONING_DISABLED=y +# CONFIG_HEAP_POISONING_LIGHT is not set +# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set +CONFIG_HEAP_TRACING_OFF=y +# CONFIG_HEAP_TRACING_STANDALONE is not set +# CONFIG_HEAP_TRACING_TOHOST is not set +# CONFIG_HEAP_USE_HOOKS is not set +# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set +# CONFIG_HEAP_PLACE_FUNCTION_INTO_FLASH is not set +# end of Heap memory debugging + +CONFIG_IEEE802154_CCA_THRESHOLD=-60 +CONFIG_IEEE802154_PENDING_TABLE_SIZE=20 + +# +# Log output +# +# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set +# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set +# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set +CONFIG_LOG_DEFAULT_LEVEL_INFO=y +# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set +# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set +CONFIG_LOG_DEFAULT_LEVEL=3 +CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y +# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set +# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set +CONFIG_LOG_MAXIMUM_LEVEL=3 +CONFIG_LOG_COLORS=y +CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y +# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set +# end of Log output + +# +# LWIP +# +CONFIG_LWIP_LOCAL_HOSTNAME="espressif" +# CONFIG_LWIP_NETIF_API is not set +# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set +# CONFIG_LWIP_CHECK_THREAD_SAFETY is not set +CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y +# CONFIG_LWIP_L2_TO_L3_COPY is not set +# CONFIG_LWIP_IRAM_OPTIMIZATION is not set +CONFIG_LWIP_TIMERS_ONDEMAND=y +CONFIG_LWIP_MAX_SOCKETS=10 +# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set +# CONFIG_LWIP_SO_LINGER is not set +CONFIG_LWIP_SO_REUSE=y +CONFIG_LWIP_SO_REUSE_RXTOALL=y +# CONFIG_LWIP_SO_RCVBUF is not set +# CONFIG_LWIP_NETBUF_RECVINFO is not set +CONFIG_LWIP_IP4_FRAG=y +CONFIG_LWIP_IP6_FRAG=y +# CONFIG_LWIP_IP4_REASSEMBLY is not set +# CONFIG_LWIP_IP6_REASSEMBLY is not set +CONFIG_LWIP_IP_REASS_MAX_PBUFS=10 +# CONFIG_LWIP_IP_FORWARD is not set +# CONFIG_LWIP_STATS is not set +CONFIG_LWIP_ESP_GRATUITOUS_ARP=y +CONFIG_LWIP_GARP_TMR_INTERVAL=60 +CONFIG_LWIP_ESP_MLDV6_REPORT=y +CONFIG_LWIP_MLDV6_TMR_INTERVAL=40 +CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 +CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y +# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set +CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y +# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set +CONFIG_LWIP_DHCP_OPTIONS_LEN=68 +CONFIG_LWIP_NUM_NETIF_CLIENT_DATA=0 +CONFIG_LWIP_DHCP_COARSE_TIMER_SECS=1 + +# +# DHCP server +# +CONFIG_LWIP_DHCPS=y +CONFIG_LWIP_DHCPS_LEASE_UNIT=60 +CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 +# end of DHCP server + +# CONFIG_LWIP_AUTOIP is not set +CONFIG_LWIP_IPV4=y +CONFIG_LWIP_IPV6=y +# CONFIG_LWIP_IPV6_AUTOCONFIG is not set +CONFIG_LWIP_IPV6_NUM_ADDRESSES=3 +# CONFIG_LWIP_IPV6_FORWARD is not set +# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set +CONFIG_LWIP_NETIF_LOOPBACK=y +CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 + +# +# TCP +# +CONFIG_LWIP_MAX_ACTIVE_TCP=16 +CONFIG_LWIP_MAX_LISTENING_TCP=16 +CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y +CONFIG_LWIP_TCP_MAXRTX=12 +CONFIG_LWIP_TCP_SYNMAXRTX=12 +CONFIG_LWIP_TCP_MSS=1440 +CONFIG_LWIP_TCP_TMR_INTERVAL=250 +CONFIG_LWIP_TCP_MSL=60000 +CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT=20000 +CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 +CONFIG_LWIP_TCP_WND_DEFAULT=5744 +CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 +CONFIG_LWIP_TCP_QUEUE_OOSEQ=y +# CONFIG_LWIP_TCP_SACK_OUT is not set +CONFIG_LWIP_TCP_OVERSIZE_MSS=y +# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set +# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set +CONFIG_LWIP_TCP_RTO_TIME=1500 +# end of TCP + +# +# UDP +# +CONFIG_LWIP_MAX_UDP_PCBS=16 +CONFIG_LWIP_UDP_RECVMBOX_SIZE=6 +# end of UDP + +# +# Checksums +# +# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set +# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set +CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y +# end of Checksums + +CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072 +CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set +# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set +CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_LWIP_PPP_SUPPORT is not set +CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3 +CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5 +# CONFIG_LWIP_SLIP_SUPPORT is not set + +# +# ICMP +# +CONFIG_LWIP_ICMP=y +# CONFIG_LWIP_MULTICAST_PING is not set +# CONFIG_LWIP_BROADCAST_PING is not set +# end of ICMP + +# +# LWIP RAW API +# +CONFIG_LWIP_MAX_RAW_PCBS=16 +# end of LWIP RAW API + +# +# SNTP +# +CONFIG_LWIP_SNTP_MAX_SERVERS=1 +# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set +CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 +# end of SNTP + +CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7 +CONFIG_LWIP_ESP_LWIP_ASSERT=y + +# +# Hooks +# +# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set +CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y +# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y +# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set +CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y +# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set +# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE=y +# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_CUSTOM is not set +CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y +# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set +# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_INPUT_NONE=y +# CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM is not set +# end of Hooks + +# CONFIG_LWIP_DEBUG is not set +# end of LWIP + +# +# mbedTLS +# +CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y +# CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC is not set +# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set +# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set +CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y +CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384 +CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 +# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set +# CONFIG_MBEDTLS_DEBUG is not set + +# +# mbedTLS v3.x related +# +# CONFIG_MBEDTLS_SSL_PROTO_TLS1_3 is not set +# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set +# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set +# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set +CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y +CONFIG_MBEDTLS_PKCS7_C=y +# end of mbedTLS v3.x related + +# +# Certificate Bundle +# +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y +# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set +# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set +# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200 +# end of Certificate Bundle + +# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set +# CONFIG_MBEDTLS_CMAC_C is not set +CONFIG_MBEDTLS_HARDWARE_AES=y +CONFIG_MBEDTLS_AES_USE_INTERRUPT=y +CONFIG_MBEDTLS_HARDWARE_MPI=y +CONFIG_MBEDTLS_MPI_USE_INTERRUPT=y +CONFIG_MBEDTLS_HARDWARE_SHA=y +CONFIG_MBEDTLS_ROM_MD5=y +# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set +# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set +CONFIG_MBEDTLS_HAVE_TIME=y +# CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set +# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set +CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y +CONFIG_MBEDTLS_SHA512_C=y +CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y +# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set +# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set +# CONFIG_MBEDTLS_TLS_DISABLED is not set +CONFIG_MBEDTLS_TLS_SERVER=y +CONFIG_MBEDTLS_TLS_CLIENT=y +CONFIG_MBEDTLS_TLS_ENABLED=y + +# +# TLS Key Exchange Methods +# +# CONFIG_MBEDTLS_PSK_MODES is not set +CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y +# end of TLS Key Exchange Methods + +CONFIG_MBEDTLS_SSL_RENEGOTIATION=y +CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y +# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set +# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set +CONFIG_MBEDTLS_SSL_ALPN=y +CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y +CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y + +# +# Symmetric Ciphers +# +CONFIG_MBEDTLS_AES_C=y +# CONFIG_MBEDTLS_CAMELLIA_C is not set +# CONFIG_MBEDTLS_DES_C is not set +# CONFIG_MBEDTLS_BLOWFISH_C is not set +# CONFIG_MBEDTLS_XTEA_C is not set +CONFIG_MBEDTLS_CCM_C=y +CONFIG_MBEDTLS_GCM_C=y +# CONFIG_MBEDTLS_NIST_KW_C is not set +# end of Symmetric Ciphers + +# CONFIG_MBEDTLS_RIPEMD160_C is not set + +# +# Certificates +# +CONFIG_MBEDTLS_PEM_PARSE_C=y +CONFIG_MBEDTLS_PEM_WRITE_C=y +CONFIG_MBEDTLS_X509_CRL_PARSE_C=y +CONFIG_MBEDTLS_X509_CSR_PARSE_C=y +# end of Certificates + +CONFIG_MBEDTLS_ECP_C=y +# CONFIG_MBEDTLS_DHM_C is not set +CONFIG_MBEDTLS_ECDH_C=y +CONFIG_MBEDTLS_ECDSA_C=y +# CONFIG_MBEDTLS_ECJPAKE_C is not set +CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y +CONFIG_MBEDTLS_ECP_NIST_OPTIM=y +# CONFIG_MBEDTLS_POLY1305_C is not set +# CONFIG_MBEDTLS_CHACHA20_C is not set +# CONFIG_MBEDTLS_HKDF_C is not set +# CONFIG_MBEDTLS_THREADING_C is not set +# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set +# CONFIG_MBEDTLS_SECURITY_RISKS is not set +# end of mbedTLS + +# +# ESP-MQTT Configurations +# +CONFIG_MQTT_PROTOCOL_311=y +# CONFIG_MQTT_PROTOCOL_5 is not set +CONFIG_MQTT_TRANSPORT_SSL=y +CONFIG_MQTT_TRANSPORT_WEBSOCKET=y +CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y +# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set +# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set +# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set +# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set +# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set +# CONFIG_MQTT_CUSTOM_OUTBOX is not set +# end of ESP-MQTT Configurations + +# +# Newlib +# +CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y +# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set +# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set +# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set +# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set +CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y +# CONFIG_NEWLIB_NANO_FORMAT is not set +CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y +# CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC is not set +# CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT is not set +# CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set +# end of Newlib + +# +# NVS +# +# CONFIG_NVS_ASSERT_ERROR_CHECK is not set +# end of NVS + +# +# OpenThread +# +# CONFIG_OPENTHREAD_ENABLED is not set + +# +# Thread Operational Dataset +# +CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP" +CONFIG_OPENTHREAD_NETWORK_CHANNEL=15 +CONFIG_OPENTHREAD_NETWORK_PANID=0x1234 +CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe" +CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff" +CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53" +# end of Thread Operational Dataset +# end of OpenThread + +# +# Protocomm +# +CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0=y +CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1=y +CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2=y +# end of Protocomm + +# +# PThreads +# +CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5 +CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 +CONFIG_PTHREAD_STACK_MIN=768 +CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y +# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set +# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set +CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1 +CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread" +# end of PThreads + +# +# MMU Config +# +CONFIG_MMU_PAGE_SIZE_64KB=y +CONFIG_MMU_PAGE_MODE="64KB" +CONFIG_MMU_PAGE_SIZE=0x10000 +# end of MMU Config + +# +# SPI Flash driver +# +# CONFIG_SPI_FLASH_VERIFY_WRITE is not set +# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set +CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y +# CONFIG_SPI_FLASH_ROM_IMPL is not set +CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y +# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set +# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set +# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set +CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y +CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20 +CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 +CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 +# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set +# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set +# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set + +# +# SPI Flash behavior when brownout +# +CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC=y +CONFIG_SPI_FLASH_BROWNOUT_RESET=y +# end of SPI Flash behavior when brownout + +# +# Auto-detect flash chips +# +CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_BOYA_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_TH_SUPPORTED=y +CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_TH_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_MXIC_OPI_CHIP=y +# end of Auto-detect flash chips + +CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y +# end of SPI Flash driver + +# +# SPIFFS Configuration +# +CONFIG_SPIFFS_MAX_PARTITIONS=3 + +# +# SPIFFS Cache Configuration +# +CONFIG_SPIFFS_CACHE=y +CONFIG_SPIFFS_CACHE_WR=y +# CONFIG_SPIFFS_CACHE_STATS is not set +# end of SPIFFS Cache Configuration + +CONFIG_SPIFFS_PAGE_CHECK=y +CONFIG_SPIFFS_GC_MAX_RUNS=10 +# CONFIG_SPIFFS_GC_STATS is not set +CONFIG_SPIFFS_PAGE_SIZE=256 +CONFIG_SPIFFS_OBJ_NAME_LEN=32 +# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set +CONFIG_SPIFFS_USE_MAGIC=y +CONFIG_SPIFFS_USE_MAGIC_LENGTH=y +CONFIG_SPIFFS_META_LENGTH=4 +CONFIG_SPIFFS_USE_MTIME=y + +# +# Debug Configuration +# +# CONFIG_SPIFFS_DBG is not set +# CONFIG_SPIFFS_API_DBG is not set +# CONFIG_SPIFFS_GC_DBG is not set +# CONFIG_SPIFFS_CACHE_DBG is not set +# CONFIG_SPIFFS_CHECK_DBG is not set +# CONFIG_SPIFFS_TEST_VISUALISATION is not set +# end of Debug Configuration +# end of SPIFFS Configuration + +# +# TCP Transport +# + +# +# Websocket +# +CONFIG_WS_TRANSPORT=y +CONFIG_WS_BUFFER_SIZE=1024 +# CONFIG_WS_DYNAMIC_BUFFER is not set +# end of Websocket +# end of TCP Transport + +# +# Ultra Low Power (ULP) Co-processor +# +# CONFIG_ULP_COPROC_ENABLED is not set +# end of Ultra Low Power (ULP) Co-processor + +# +# Unity unit testing library +# +CONFIG_UNITY_ENABLE_FLOAT=y +CONFIG_UNITY_ENABLE_DOUBLE=y +# CONFIG_UNITY_ENABLE_64BIT is not set +# CONFIG_UNITY_ENABLE_COLOR is not set +CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y +# CONFIG_UNITY_ENABLE_FIXTURE is not set +# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set +# end of Unity unit testing library + +# +# USB-OTG +# +CONFIG_USB_OTG_SUPPORTED=y +CONFIG_USB_HOST_CONTROL_TRANSFER_MAX_SIZE=256 +CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED=y +# CONFIG_USB_HOST_HW_BUFFER_BIAS_IN is not set +# CONFIG_USB_HOST_HW_BUFFER_BIAS_PERIODIC_OUT is not set + +# +# Root Hub configuration +# +CONFIG_USB_HOST_DEBOUNCE_DELAY_MS=250 +CONFIG_USB_HOST_RESET_HOLD_MS=30 +CONFIG_USB_HOST_RESET_RECOVERY_MS=30 +CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS=10 +# end of Root Hub configuration +# end of USB-OTG + +# +# Virtual file system +# +CONFIG_VFS_SUPPORT_IO=y +CONFIG_VFS_SUPPORT_DIR=y +CONFIG_VFS_SUPPORT_SELECT=y +CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y +CONFIG_VFS_SUPPORT_TERMIOS=y +CONFIG_VFS_MAX_COUNT=8 + +# +# Host File System I/O (Semihosting) +# +CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1 +# end of Host File System I/O (Semihosting) +# end of Virtual file system + +# +# Wear Levelling +# +CONFIG_WL_SECTOR_SIZE_512=y +# CONFIG_WL_SECTOR_SIZE_4096 is not set +CONFIG_WL_SECTOR_SIZE=512 +CONFIG_WL_SECTOR_MODE_PERF=y +# CONFIG_WL_SECTOR_MODE_SAFE is not set +CONFIG_WL_SECTOR_MODE=0 +# end of Wear Levelling + +# +# Wi-Fi Provisioning Manager +# +CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 +CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 +# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set +CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y +# CONFIG_WIFI_PROV_STA_FAST_SCAN is not set +# end of Wi-Fi Provisioning Manager + +# +# TinyUSB Stack +# +CONFIG_TINYUSB_DEBUG_LEVEL=0 + +# +# TinyUSB task configuration +# +# CONFIG_TINYUSB_NO_DEFAULT_TASK is not set +CONFIG_TINYUSB_TASK_PRIORITY=5 +CONFIG_TINYUSB_TASK_STACK_SIZE=4096 +CONFIG_TINYUSB_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_TINYUSB_TASK_AFFINITY_CPU0 is not set +# CONFIG_TINYUSB_TASK_AFFINITY_CPU1 is not set +CONFIG_TINYUSB_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_TINYUSB_INIT_IN_DEFAULT_TASK is not set +# end of TinyUSB task configuration + +# +# Descriptor configuration +# + +# +# You can provide your custom descriptors via tinyusb_driver_install() +# +CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID=y +CONFIG_TINYUSB_DESC_USE_DEFAULT_PID=y +CONFIG_TINYUSB_DESC_BCD_DEVICE=0x0100 +CONFIG_TINYUSB_DESC_MANUFACTURER_STRING="Espressif Systems" +CONFIG_TINYUSB_DESC_PRODUCT_STRING="Espressif Device" +CONFIG_TINYUSB_DESC_SERIAL_STRING="123456" +CONFIG_TINYUSB_DESC_MSC_STRING="Espressif MSC Device" +# end of Descriptor configuration + +# +# Massive Storage Class (MSC) +# +CONFIG_TINYUSB_MSC_ENABLED=y +CONFIG_TINYUSB_MSC_BUFSIZE=512 +CONFIG_TINYUSB_MSC_MOUNT_PATH="/data" +# end of Massive Storage Class (MSC) + +# +# Communication Device Class (CDC) +# +# CONFIG_TINYUSB_CDC_ENABLED is not set +# end of Communication Device Class (CDC) + +# +# Musical Instrument Digital Interface (MIDI) +# +CONFIG_TINYUSB_MIDI_COUNT=0 +# end of Musical Instrument Digital Interface (MIDI) + +# +# Human Interface Device Class (HID) +# +CONFIG_TINYUSB_HID_COUNT=0 +# end of Human Interface Device Class (HID) + +# +# Device Firmware Upgrade (DFU) +# +# CONFIG_TINYUSB_DFU_MODE_DFU is not set +# CONFIG_TINYUSB_DFU_MODE_DFU_RUNTIME is not set +CONFIG_TINYUSB_DFU_MODE_NONE=y +# end of Device Firmware Upgrade (DFU) + +# +# Bluetooth Host Class (BTH) +# +# CONFIG_TINYUSB_BTH_ENABLED is not set +# end of Bluetooth Host Class (BTH) + +# +# Network driver (ECM/NCM/RNDIS) +# +# CONFIG_TINYUSB_NET_MODE_ECM_RNDIS is not set +# CONFIG_TINYUSB_NET_MODE_NCM is not set +CONFIG_TINYUSB_NET_MODE_NONE=y +# end of Network driver (ECM/NCM/RNDIS) +# end of TinyUSB Stack +# end of Component config + +CONFIG_IDF_EXPERIMENTAL_FEATURES=y + +# Deprecated options for backward compatibility +# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set +# CONFIG_NO_BLOBS is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set +CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y +# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set +CONFIG_LOG_BOOTLOADER_LEVEL=3 +# CONFIG_APP_ROLLBACK_ENABLE is not set +# CONFIG_FLASH_ENCRYPTION_ENABLED is not set +CONFIG_FLASHMODE_QIO=y +# CONFIG_FLASHMODE_QOUT is not set +# CONFIG_FLASHMODE_DIO is not set +# CONFIG_FLASHMODE_DOUT is not set +CONFIG_MONITOR_BAUD=115200 +CONFIG_OPTIMIZATION_LEVEL_DEBUG=y +CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y +# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set +# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set +CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y +# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set +# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set +CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_CXX_EXCEPTIONS is not set +CONFIG_STACK_CHECK_NONE=y +# CONFIG_STACK_CHECK_NORM is not set +# CONFIG_STACK_CHECK_STRONG is not set +# CONFIG_STACK_CHECK_ALL is not set +# CONFIG_WARN_WRITE_STRINGS is not set +# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set +CONFIG_ESP32_APPTRACE_DEST_NONE=y +CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y +# CONFIG_MCPWM_ISR_IN_IRAM is not set +# CONFIG_EXTERNAL_COEX_ENABLE is not set +# CONFIG_ESP_WIFI_EXTERNAL_COEXIST_ENABLE is not set +# CONFIG_EVENT_LOOP_PROFILING is not set +CONFIG_POST_EVENTS_FROM_ISR=y +CONFIG_POST_EVENTS_FROM_IRAM_ISR=y +# CONFIG_OTA_ALLOW_HTTP is not set +CONFIG_ESP32S3_DEEP_SLEEP_WAKEUP_DELAY=2000 +CONFIG_ESP32S3_RTC_CLK_SRC_INT_RC=y +# CONFIG_ESP32S3_RTC_CLK_SRC_EXT_CRYS is not set +# CONFIG_ESP32S3_RTC_CLK_SRC_EXT_OSC is not set +# CONFIG_ESP32S3_RTC_CLK_SRC_INT_8MD256 is not set +CONFIG_ESP32S3_RTC_CLK_CAL_CYCLES=1024 +CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP32_PHY_MAX_TX_POWER=20 +# CONFIG_REDUCE_PHY_TX_POWER is not set +# CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set +CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU=y +CONFIG_ESP32S3_SPIRAM_SUPPORT=y +CONFIG_DEFAULT_PSRAM_CLK_IO=30 +CONFIG_DEFAULT_PSRAM_CS_IO=26 +# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_80 is not set +# CONFIG_ESP32S3_DEFAULT_CPU_FREQ_160 is not set +CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240=y +CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ=240 +CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_MAIN_TASK_STACK_SIZE=3584 +CONFIG_CONSOLE_UART_DEFAULT=y +# CONFIG_CONSOLE_UART_CUSTOM is not set +# CONFIG_CONSOLE_UART_NONE is not set +# CONFIG_ESP_CONSOLE_UART_NONE is not set +CONFIG_CONSOLE_UART=y +CONFIG_CONSOLE_UART_NUM=0 +CONFIG_CONSOLE_UART_BAUDRATE=115200 +CONFIG_INT_WDT=y +CONFIG_INT_WDT_TIMEOUT_MS=300 +CONFIG_INT_WDT_CHECK_CPU1=y +CONFIG_TASK_WDT=y +CONFIG_ESP_TASK_WDT=y +# CONFIG_TASK_WDT_PANIC is not set +CONFIG_TASK_WDT_TIMEOUT_S=5 +CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y +CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y +# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set +CONFIG_ESP32S3_DEBUG_OCDAWARE=y +CONFIG_BROWNOUT_DET=y +CONFIG_ESP32S3_BROWNOUT_DET=y +CONFIG_ESP32S3_BROWNOUT_DET=y +CONFIG_BROWNOUT_DET_LVL_SEL_7=y +CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_7=y +# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set +# CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_1 is not set +CONFIG_BROWNOUT_DET_LVL=7 +CONFIG_ESP32S3_BROWNOUT_DET_LVL=7 +CONFIG_IPC_TASK_STACK_SIZE=1280 +CONFIG_TIMER_TASK_STACK_SIZE=3584 +CONFIG_ESP32_WIFI_ENABLED=y +CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 +CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 +CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y +CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0 +CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16 +CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=32 +# CONFIG_ESP32_WIFI_CSI_ENABLED is not set +CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y +CONFIG_ESP32_WIFI_TX_BA_WIN=6 +CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP32_WIFI_RX_BA_WIN=6 +CONFIG_ESP32_WIFI_RX_BA_WIN=6 +# CONFIG_ESP32_WIFI_AMSDU_TX_ENABLED is not set +CONFIG_ESP32_WIFI_NVS_ENABLED=y +CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y +# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set +CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 +CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 +CONFIG_ESP32_WIFI_IRAM_OPT=y +CONFIG_ESP32_WIFI_RX_IRAM_OPT=y +CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y +CONFIG_ESP32_WIFI_ENABLE_WPA3_OWE_STA=y +CONFIG_WPA_MBEDTLS_CRYPTO=y +CONFIG_WPA_MBEDTLS_TLS_CLIENT=y +# CONFIG_WPA_WAPI_PSK is not set +# CONFIG_WPA_SUITE_B_192 is not set +# CONFIG_WPA_11KV_SUPPORT is not set +# CONFIG_WPA_MBO_SUPPORT is not set +# CONFIG_WPA_DPP_SUPPORT is not set +# CONFIG_WPA_11R_SUPPORT is not set +# CONFIG_WPA_WPS_SOFTAP_REGISTRAR is not set +# CONFIG_WPA_WPS_STRICT is not set +# CONFIG_WPA_DEBUG_PRINT is not set +# CONFIG_WPA_TESTING_OPTIONS is not set +# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set +# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set +CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y +CONFIG_TIMER_TASK_PRIORITY=1 +CONFIG_TIMER_TASK_STACK_DEPTH=2048 +CONFIG_TIMER_QUEUE_LENGTH=10 +# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set +# CONFIG_HAL_ASSERTION_SILIENT is not set +# CONFIG_L2_TO_L3_COPY is not set +CONFIG_ESP_GRATUITOUS_ARP=y +CONFIG_GARP_TMR_INTERVAL=60 +CONFIG_TCPIP_RECVMBOX_SIZE=32 +CONFIG_TCP_MAXRTX=12 +CONFIG_TCP_SYNMAXRTX=12 +CONFIG_TCP_MSS=1440 +CONFIG_TCP_MSL=60000 +CONFIG_TCP_SND_BUF_DEFAULT=5744 +CONFIG_TCP_WND_DEFAULT=5744 +CONFIG_TCP_RECVMBOX_SIZE=6 +CONFIG_TCP_QUEUE_OOSEQ=y +CONFIG_TCP_OVERSIZE_MSS=y +# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set +# CONFIG_TCP_OVERSIZE_DISABLE is not set +CONFIG_UDP_RECVMBOX_SIZE=6 +CONFIG_TCPIP_TASK_STACK_SIZE=3072 +CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set +# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set +CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_PPP_SUPPORT is not set +CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC_SYSTIMER=y +CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC_FRC1=y +# CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC is not set +# CONFIG_ESP32S3_TIME_SYSCALL_USE_SYSTIMER is not set +# CONFIG_ESP32S3_TIME_SYSCALL_USE_FRC1 is not set +# CONFIG_ESP32S3_TIME_SYSCALL_USE_NONE is not set +CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 +CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 +CONFIG_ESP32_PTHREAD_STACK_MIN=768 +CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y +# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set +# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set +CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1 +CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread" +CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y +# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set +# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set +CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y +CONFIG_SUPPORT_TERMIOS=y +CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1 +# End of deprecated options