We discovered that this board expects the UART signal to be on pin 4 which apparently is what their 2130 steppers use. Other brands or types of steppers commonly use pin 5, including their own 2208 driver. In this case, you need to bridge the 4 and 5 pin together to be able to use UART mode. as shown here.
SKR V1.3 Labeled
SKR V1.3 Pinouts
{% file src="../../.gitbook/assets/skr-v1.3-instructions.pdf" %}
This is a case to fit the Ender 3 and Ender 3 Pro.
{% embed url="https://www.thingiverse.com/thing:3489836" %}