Skip to content

Latest commit

 

History

History
224 lines (167 loc) · 11.2 KB

CONTRIBUTING.adoc

File metadata and controls

224 lines (167 loc) · 11.2 KB
Raw

Spring Integration Contributor Guidelines

Have something you’d like to contribute to Spring Integration? We welcome pull requests, but ask that you carefully read this document first to understand how best to submit them; what kind of changes are likely to be accepted; and what to expect from the Spring team when evaluating your submission.

Please refer back to this document as a checklist before issuing any pull request; this will save time for everyone!

Code of Conduct

This project adheres to the Contributor Covenant code of conduct. By participating, you are expected to uphold this code. Please report unacceptable behavior to [email protected].

Understand the basics

Not sure what a pull request is, or how to submit one? Take a look at GitHub’s excellent documentation: Using Pull Requests first.

Search JIRA first; create an issue if necessary

Is there already an issue that addresses your concern? Search the JIRA issue tracker to see if you can find something similar. If not, please create a new issue before submitting a pull request unless the change is truly trivial, e.g. typo fixes, removing compiler warnings, etc.

Sign the contributor license agreement

If you have not previously done so, please fill out and submit the Contributor License Agreement (CLA).

Very important, before we can accept any Spring Integration contributions, we will need you to sign the CLA. Signing the CLA does not grant anyone commit rights to the main repository, but it does mean that we can accept your contributions, and you will get an author credit if we do.

Fork the Repository

  1. Go to https://github.com/spring-projects/spring-integration

  2. Hit the "fork" button and choose your own github account as the target

  3. For more detail see Fork A Repo.

Setup your Local Development Environment

  1. git clone --recursive [email protected]:<your-github-username>/spring-integration.git

  2. cd spring-integration

  3. git remote show you should see only 'origin' - which is the fork you created for your own github account

  4. git remote add upstream [email protected]:spring-projects/spring-integration.git

  5. git remote show you should now see 'upstream' in addition to 'origin' where 'upstream' is the SpringSource repository from which releases are built

  6. git fetch --all

  7. git branch -a you should see branches on origin as well as upstream, including 'master' and 'maint'

A Day in the Life of a Contributor

  • Always work on topic branches (Typically use the Jira ticket ID as the branch name).

    • For example, to create and switch to a new branch for issue INT-123: git checkout -b INT-123

  • You might be working on several different topic branches at any given time, but when at a stopping point for one of those branches, commit (a local operation).

  • Please follow the "Commit Guidelines" described in this chapter of Pro Git.

  • Then to begin working on another issue (say INT-101): git checkout INT-101. The -b flag is not needed if that branch already exists in your local repository.

  • When ready to resolve an issue or to collaborate with others, you can push your branch to origin (your fork), e.g.: git push origin INT-123

  • If you want to collaborate with another contributor, have them fork your repository (add it as a remote) and git fetch <your-username> to grab your branch. Alternatively, they can use git fetch --all to sync their local state with all of their remotes.

  • If you grant that collaborator push access to your repository, they can even apply their changes to your branch.

  • When ready for your contribution to be reviewed for potential inclusion in the master branch of the canonical spring-integration repository (what you know as 'upstream'), issue a pull request to the SpringSource repository (for more detail, see Using pull requests).

  • The project lead may merge your changes into the upstream master branch as-is, he may keep the pull request open yet add a comment about something that should be modified, or he might reject the pull request by closing it.

  • A prerequisite for any pull request is that it will be cleanly merge-able with the upstream master’s current state. This is the responsibility of any contributor. If your pull request cannot be applied cleanly, the project lead will most likely add a comment requesting that you make it merge-able. For a full explanation, see the Pro Git section on rebasing. As stated there: "> Often, you’ll do this to make sure your commits apply cleanly on a remote branch — perhaps in a project to which you’re trying to contribute but that you don’t maintain."

Keeping your Local Code in Sync

  • As mentioned above, you should always work on topic branches (since 'master' is a moving target). However, you do want to always keep your own 'origin' master branch in synch with the 'upstream' master.

  • Within your local working directory, you can sync up all remotes' branches with: git fetch --all

  • While on your own local master branch: git pull upstream master (which is the equivalent of fetching upstream/master and merging that into the branch you are in currently)

  • Now that you’re in synch, switch to the topic branch where you plan to work, e.g.: git checkout -b INT-123

  • When you get to a stopping point: git commit

  • If changes have occurred on the upstream/master while you were working you can synch again:

    • Switch back to master: git checkout master

    • Then: git pull upstream master

    • Switch back to the topic branch: git checkout INT-123 (no -b needed since the branch already exists)

    • Rebase the topic branch to minimize the distance between it and your recently synched master branch: git rebase master (Again, for more detail see the Pro Git section on rebasing).

  • Note While it is generally recommended to not re-write history by using push --force, and we do not do this on master (and release) branches in the main repo, we require topic branches for pull requests to be rebased before merging, in order to maintain a clean timeline and avoid "merge" commits.

  • If, while rebasing for the merge, we find significant conflicts, we may ask you to rebase and push --force to your topic branch after resolving the conflicts.

  • Assuming your pull request is merged into the 'upstream' master, you will end up pulling that change into your own master eventually and, at that time, you may decide to delete the topic branch from your local repository and your fork (origin) if you pushed it there.

    • to delete the local branch: git branch -d INT-123

    • to delete the branch from your origin: git push origin :INT-123

Maintain a linear commit history

When merging to master, the project always uses fast-forward merges. As discussed above, when issuing pull requests, please ensure that your commit history is linear. From the command line you can check this using:

log --graph --pretty=oneline

As this may cause lots of typing, we recommend creating a global alias, e.g. git logg for this:

git config --global alias.logg 'log --graph --pretty=oneline'

This command, will provide the following output, which in this case shows a nice linear history:

* c129a02e6c752b49bacd4a445092a44f66c2a1e9 INT-2721 Increase Timers on JDBC Delayer Tests
* 14e556ce23d49229c420632cef608630b1d82e7d INT-2620 Fix Debug Log
* 6140aa7b2cfb6ae309c55a157e94b44e5d0bea4f INT-3037 Fix JDBC MS Discard After Completion
* 077f2b24ea871a3937c513e08241d1c6cb9c9179 Update Spring Social Twitter to 1.0.5
* 6d4f2b46d859c903881a561c35aa28df68f8faf3 INT-3053 Allow task-executor on <reply-listener/>
* 56f9581b85a8a40bbcf2461ffc0753212669a68d Update Spring Social Twitter version to 1.0.4

If you see intersecting lines, that usually means that you forgot to rebase you branch. As mentioned earlier, please rebase against master before issuing a pull request.

Follow the Code Style

Please, follow with the Spring Integration Code Style.

Use @since tags

Use @since tags for newly-added public API types and methods e.g.

/**
 * ...
 *
 * @author First Last
 * @since 3.0
 * @see ...
 */

Use @author tags

Use @author tag with your real name, when you change any class e.g.

/**
 * ...
 *
 * @author First Last
 */

Submit JUnit test cases for all behavior changes

Search the codebase to find related unit tests and add additional @Test methods within. It is also acceptable to submit test cases on a per JIRA issue basis.

Squash commits

Use git rebase --interactive, git add --patch and other tools to "squash" multiple commits into atomic changes. In addition to the man pages for git, there are many resources online to help you understand how these tools work.

Use your real name in git commits

Please configure git to use your real first and last name for any commits you intend to submit as pull requests. For example, this is not acceptable:

Author: Nickname <[email protected]>

Rather, please include your first and last name, properly capitalized, as submitted against the SpringSource contributor license agreement:

Author: First Last <[email protected]>

This helps ensure traceability against the CLA, and also goes a long way to ensuring useful output from tools like git shortlog and others.

You can configure this globally via the account admin area GitHub (useful for fork-and-edit cases); globally with

git config --global user.name "First Last"
git config --global user.email [email protected]

or locally for the spring-integration repository only by omitting the '--global' flag:

cd spring-integration
git config user.name "First Last"
git config user.email [email protected]

Run all tests prior to submission

See the checking out and building section of the README for instructions. Make sure that all tests pass prior to submitting your pull request.

Mention your pull request on the associated JIRA issue

Add a comment to the associated JIRA issue(s) linking to your new pull request.

Provide a Link to the JIRA issue in the Associated Pull Request

Add a JIRA issue link to your first commit comment of the pull request on the last line, so your commit message may look like this:

    INT-1639: Add <spel-function> support

    JIRA: https://jira.springsource.org/browse/INT-1639

    * add `<spel-function>` XSD element
    * add `SpelFunctionParser`
    * add `SpelFunctionRegistrar` to avoid introducing some confused 'Method'-bean
    * add `SpelFunctionRegistrar` collaboration with `IntegrationEvaluationContextFactoryBean`
    * some refactoring for `IntegrationEvaluationContextFactoryBean`
    * polishing some failed tests after this change