lpc2106.cfg

# fcs -- based on /usr/share/openocd/scripts/target/lpc2124.cfg

#was LPC-2124 CPU
#now LPC2106

if { [info exists CHIPNAME] } {
   set  _CHIPNAME $CHIPNAME
} else {
   #set  _CHIPNAME lpc2124
   set  _CHIPNAME lpc2106
}

if { [info exists ENDIAN] } {
   set  _ENDIAN $ENDIAN
} else {
   set  _ENDIAN little
}

if { [info exists CPUTAPID ] } {
   set _CPUTAPID $CPUTAPID
} else {
  # force an error till we get a good number
    set _CPUTAPID 0x4f1f0f0f
}


#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst

# reset delays
#jtag_nsrst_delay 100
#jtag_ntrst_delay 100
jtag_nsrst_delay 200
jtag_ntrst_delay 200

jtag_khz 1000
#jtag_khz 32
#jtag_khz 16

#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID

set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4

$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0


#flash bank <driver> <base> <size> <chip_width> <bus_width>
#flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum

# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum]
flash bank lpc2000 0x0 0x20000 0 0 0 lpc2000_v1 14746 calc_checksum